Logitech G703 User manual

G703
LIGHTSPEED Wireless Gaming Mouse
Souris gaming sans l LIGHTSPEED
SETUP GUIDE |GUIDE D’INSTALLATION

Important Safety, Compliance and
Warranty Information
Informations importantes
concernant la sécurité,
la mise en conformité et la garantie
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . .3
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . 9
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . 15
PORTUGUÊS . . . . . . . . . . . . . . . . . . . . . . 21

3ENGLISH
SETUP INSTRUCTIONS
1 A wireless receiver, USB adapter, and optional 10g weight can
be found in the packaging. Plug one end of the cable into
yourPC, andtheother end into the USB adapter and receiver.
–The receiver can also be used plugged directly into
yourPC. However, using the cable and adapter when
in wireless mode is recommended and allows for better
connectivity and easy access to the cable for recharging.
2 Turn mouse on via the switch on the bottom of the mouse.
10g
1
2

4ENGLISH
3 To charge, disconnect the cable from the adapter and
plug into the front of the mouse. Your mouse will operate
in data-over-cable mode whenever it is plugged in directly
toaPC. Full charge from empty requires approximately
twohours plugged in to a PC USB port.
Tips:
–Keep the mouse and receiver 2 m+ away from wireless
routersor other 2.4GHz wireless devices to minimize
environmental noise.
–G703 has a wireless range of up to 10 meters. Toensure optimal
performance in noisy wireless environments, andtokeep
thecharging cable easily accessible, itisrecommended
tokeep the receiver within 20 cm ofthemouse.
2 m+
20 cm-
3

5ENGLISH
MOUSE FEATURES
1 Left (Button 1)
2 Right (Button 2)
3 Wheel click (Button 3)
4 Back (Button 4)
5 Forward (Button 5)
6 DPI Cycle
7 On/O switch (bottom of mouse, not programmable)
8 Weight door
1
6
4
5
2
7
8
3

6ENGLISH
WIRELESS BATTERY LIFE
G703 has a rechargeable 720mAh LiPol battery which provides
it with up to 32 hours non-stop gaming at 1ms report rate
withlights o, or 24 hours non-stop gaming at 1ms report rate
with RGB color cycling on.*
–Charge level can be checked when the mouse is poweredon
orusing Logitech Gaming Software to assign a button
tocheck charge level.
–Charge level is displayed for seven seconds at mouse
power-onusing the color of the scroll wheel.
–Green = 50–100%
–Orange = 30–50%
–Red = 15–30%
–Flashing red = <15%
Tip: You can program a button to show charge level
usingLGS.
–The scroll wheel will ash red when battery is at 15% or less.
When this happens, plug in your mouse to charge.
–Charge level, power draw, and estimated remaining
batterylife can be checked in Logitech Gaming Software
*Battery life and capacity may vary with age and use. Rechargeable batteries have a limited
number of charge cycles.

7ENGLISH
CHARGING/DATA OVER CABLE
Plug your mouse in via the provided USB charging cable when
the battery is low. The mouse will seamlessly swap to data-over-
cable mode whenever it is plugged in. G703 is also compatible
with the Logitech G POWERPLAY wireless charging system,
soldseparately.
RGB PROGRAMMABLE LIGHTING
G703 wheel and logo is illuminated with RGB LEDs.
These colors can be customized using Logitech Gaming Software
to a variety of breathing, color cycling, or solid color modes.
Lighting patterns can also be synchronized with other supported
Logitech G devices using this software.

8ENGLISH
LOGITECH GAMING SOFTWARE
You can customize the 3 onboard proles of the G703 using
the Logitech Gaming Software. These settings include surface
tuning, button programming, lighting color, lighting eects,
report rate, and tracking behavior. G703 allows up to 5 DPI
settings per prole.
By default, G703 has 1 active onboard prole with
thefollowingsettings:
–DPI: 400, 800, 1600, 3200
–RGB lighting: color cycle
–Report rate: 1ms
QUESTIONS
http://support.logitech.com/product/g703

9FRANÇAIS
INSTRUCTIONS D'INSTALLATION
1 Vous trouverez un récepteur sans l, un adaptateur USB
etunpoids de 10 g en option dans le coret. Branchezl'une
des extrémités du câble à votre ordinateur etl'autre
àl'adaptateur et récepteur USB.
–Vous pouvez également brancher directement
lerécepteursur votre PC. Cependant, il est recommandé
d'utiliser lecâble et l'adaptateur en mode sans l,
carilspermettent d'améliorer la connectivité et l'accès
aucâble pour la recharge.
2 Mettez la souris sous tension à l'aide du commutateur
situésous la souris.
10g
1
2

10 FRANÇAIS
3 Pour charger, déconnectez le câble de l'adaptateur
et branchez-le à l'avant de la souris. La souris passe
automatiquement en mode transmission de données par câble
lorsqu'elle est branchée au PC. La charge pleine de la batterie
requiert le branchement de la souris à un port USB pendant
deux heures environ.
Conseils:
–Tenez la souris et le récepteur à au moins 2m de tout
routeur sans l ou tout autre dispositif sans l 2,4GHz
andeminimiser les interférences.
–La sourisG703 a une portée sans l de 10mètres maximum.
Pour une performance optimale dans les environnements
sansl sujets aux interférences, et pour faciliter l'accès
aucâble de charge, il est recommandé de placer le récepteur
àmoins de 20cm de la souris.
2 m+
20 cm-
3