Logitech T631 User manual

Bluetooth wireless technology / Technologie sans fil Bluetooth
Ultrathin Touch Mouse T631 for Mac® Souris tactile ultra-fine T631 pour Mac® Setup Guide Guide d’installation

2
English. . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . 10
Español . . . . . . . . . . . . . . . . 17
Português . . . . . . . . . . . . . . 24
www.logitech.com/support . . . 31

English3
Get to know your mouse
Touch
surface
Status
light
Micro-USB
charging cable
On
21
O
Connect
Bluetooth
Connect
button
Bluetooth
Easy Switch
On/O switch
Micro-USB port

4English
On
21
O
Connect
On
21
O
Connect
On
21
O
Connect
Set up Bluetooth
2. Select Bluetooth
channel
3. Press Connect
On your mouse
The status
light blinks
blue rapidly
to indicate the
mouse is ready
for pairing
with a Mac.
Slide the Bluetooth
Easy Switch to
position 1 or 2.
Slide the switch
to the On
position.
1. Power on
The status light
blinks blue rapidly
while the mouse
is discoverable—
about three minutes.

English5
Set up Bluetooth
On your Mac
After confirming that Bluetooth
is on, go to System Preferences
> Bluetooth and click to open
the Bluetooth Setup Assistant.
When Ultrathin Touch Mouse
appears in the device list,
select it and click Continue.
Follow the on-screen instructions.
When pairing is complete,
the status light on the mouse lights
steadily blue for 30 seconds.
Software required
Install Logitech software
for smoother performance,
customizable settings and
optimal gestures.
Download the software from:
www.logitech.com/support/t631

6English
Pair with another Mac
To use your mouse with
another Mac, pair with it using
the remaining channel.
Slide the Bluetooth Easy Switch
to the other, unused channel
and press Connect.
Repeat the instructions in “Set up
Bluetooth.”
Now you can switch between Macs
by selecting the Bluetooth channel
you used to pair it with the mouse.
Support
Visit the product page
While online, check out Product
Page, your destination for world-
class support.
Here you’ll find tutorials,
guidelines and troubleshooting
tips for your Ultrathin Touch
Mouse for Mac.
Product page is also home
to lively forums that connect you
to a community of active users.
www.logitech.com/support/t631

English7
Gestures
Clicking (one finger)
Click. Press the left side of
the touch surface.
Lift the non-
clicking finger
completely o
the surface.
Right-click. Press the right side
of the touch surface.
Scroll. Swipe up, down,
or sideways.

8English
Charge the battery
Use the charging cable to connect
the Ultrathin Touch Mouse to your
computer or a USB power adapter.
The status light blinks green while
the mouse is charging.
Charge your mouse until the status
light stops blinking. (A blinking red
light means it’s time to recharge.)
Each minute of charging gives you
about an hour of use.*
* This ratio is approximate and based on standard
user experience. Your results may vary.

English9
Troubleshooting
Mouse not working?
•OnyourMac,conrmBluetooth
is turned on.
•SlidetheOn/OswitchtoO,
then back to On.
•Ifthestatuslightashesred,
recharge the battery.
(See “Charge the battery.”)
•Conrmthattheselected
Bluetooth channel (1 or 2) is the
same channel you used to initially
pair the mouse with your Mac.
•RestartyourMac.
•ChecktheBluetoothsettings
on your Mac to see if “Ultrathin
Touch Mouse” is listed.
If so, remove it from the list
and repeat the steps for pairing
in “Set up Bluetooth.”
www.logitech.com/support/t631
What do you think?
Please take a minute to tell us.
Thank you for purchasing
our product.
www.logitech.com/iThink

10Français
Présentation
de votre souris
Surface
tactile
Témoin d'état
On
21
O
Connect
Bluetooth
Bouton de
connexion
Bluetooth
Easy-Switch
Commutateur
Marche/Arrêt
Port micro-USB
Câble de charge
micro-USB