Logitech Z337 Operating instructions

TROUBLESHOOTING
Audio distorted or dropping out from the Z337 speakers
If you’re having trouble with audio distortion or dropouts on your Z337 speakers, try these
suggestions:
Bluetooth
Move the audio source closer —it might be out of the range of your speakers.
Move the other sources of wireless signal away —you could be experiencing
interference.
Adjust the volume on both the audio source and your speakers.
Restart both your speakers and the audio source.
Try un-pairing and repairing your source device and speakers.
3.5mm Auxiliary and RCA
Check that the cables are securely connected to both the speakers and the source device.
Try a different source device to ensure the issue isn’t the device.
Try a different 3.5mm or RCA cable.
NOTE: If you’re streaming audio content from the internet, the issue could be with the internet
connection and not your speakers.
No audio from the Z337 speakers
If you’re not hearing any audio from your speakers, try these suggestions:
Bluetooth
Check to see that you’re playing audio from the correct source device.
If you have multiple Bluetooth devices connected (you can have up to two), try
disconnecting the others and only playing from one device.
If you were previously using the 3.5mm auxiliary input, try disconnecting that device.
Move the audio source closer —it might be out of the range of your speakers.
Move the other sources of wireless signal away —you could be experiencing
interference.
Adjust the volume on both the audio source and your speakers.

Restart both your speakers and the source device.
Try un-pairing and repairing your source device and speakers.
3.5mm Auxiliary and RCA
Check that the cables are securely connected to both the speakers and the source device.
Try a different source device to ensure the issue isn’t the device.
Try a different 3.5mm or RCA cable.
Bluetooth device not connecting to the Z337 speakers
If your Bluetooth device won’t connect to your Z337 speakers, try the following:
Make sure your device is paired with your speakers and that Bluetooth is active (see Set
up the Z337 speakers for pairing help).
Place your Bluetooth device closer to the speaker - it might be out of range.
Move your Bluetooth device and speakers away from other wireless sources - you could
be experiencing interference.
The Z337 can be connected to up to two devices at a time - make sure you don’t already
have two devices connected.
Set up the Z337 speakers
You can connect your devices to the Z337 speakers in three different ways. You can use:
Bluetooth
Stereo RCA
3.5mm Auxiliary
NOTE: When you turn the speakers on, they will default to the last connection used. To switch
between devices, pause the current audio, and then play audio from another connected device