Logitech Z213 User manual

Logitech® Multimedia Speaker Z213
Setup Guide

Logitech Multimedia Speaker Z213
2
English. . . . . . . . . . . . . . . . . . 3
www.logitech.com/support/z213

Logitech Multimedia Speaker Z213
3 English
What’s in the box
1. 2 satellite speakers
2. Subwoofer
3. User documentation
Logitech®
Important Information
Safety, Compliance and Warranty
1
2
3

Logitech Multimedia Speaker Z213
4 English
Setup
1. Plug the satellites cable into
the subwoofer jack.
2. Plug the power cord into
an electrical outlet.
3. Insert the 3.5mm plug from the wired
remote into the audio jack on
your device (computer, tablet,
smartphone, etc).
4. Switch ON the ON/OFF button on
the wired remote to turn the multimedia
speaker Z213 ON.
1 2 3 4

Logitech Multimedia Speaker Z213
5 English
Features
Adjusting speaker volume
Adjust the Multimedia Speaker Z213 volume
with the wheel located on the middle of
the wired remote.
Adjusting bass controls
To adjust the bass level of your Multimedia
Speaker Z213, turn the bass control
clockwise located at the back of
your subwoofer.
Using headphones
Most types of analog headphones with
a 3.5mm connector can be plugged
into the headphone jack at the front
of the wired remote. When you plug in
the headphones, the speaker is muted
automatically. With headphones plugged
into your Multimedia Speaker Z213,
the main control volume is through
your audio device (computer, tablet or
smartphone). Headphone volume will
not be aected by volume adjustment on
the wired remote.
BASS

© 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may
be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any
errors that may appear in this manual. Information contained herein is subject to change without notice.
621-000359.002
www.logitech.com
www.logitech.com/support/z213