Logitech G923 User manual

G923
Racing Wheel and Pedals For PlayStation®5 consoles and PlayStation®4 consoles
SETUP GUIDE

620-008913 003
USB
1
3
logitechG.com/support/G923-ps
2
USB
PC
G923 RACING WHEEL AND PEDALS
RACING WHEEL AND PEDALS / 赛车方向盘和踏板
PS4™
PS5™
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DEUTSCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ITALIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PORTUGUÊS . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
NEDERLANDS . . . . . . . . . . . . . . . . . . . . . . . . . . 69
SVENSKA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
DANSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NORSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
SUOMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
ΕΛΛΗΝΙΚΑ . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
ПОРУССКИ . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
PO POLSKU . . . . . . . . . . . . . . . . . . . . . . . . . . 146
MAGYAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
ČESKÁ VERZE . . . . . . . . . . . . . . . . . . . . . . . . . 168
SLOVENČINA . . . . . . . . . . . . . . . . . . . . . . . . . . .179
УКРАЇНСЬКА . . . . . . . . . . . . . . . . . . . . . . . . . . 190
EESTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
LATVISKI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
LIETUVIŲ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
БЪЛГАРСКИ . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
HRVATSKI. . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
SRPSKI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
SLOVENŠČINA . . . . . . . . . . . . . . . . . . . . . . . . . 267
ROMÂNĂ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
TÜRKÇE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

3ENGLISH
CONNECTIONS AND MOUNT POINTS
1 Mounting clamps
2 Cable management cleat
3 Optional shifter connection (DB-9 male)
4 USB cable
5 Pedal unit connection (DB-9 female)
6 Power connection
7 Bolt mounting points (uses M6X1 bolts)
OPTIMAL CABLE ROUTING
USB and pedal cables (1, 2) should be routed through inner channels.
Power and optional shifter cables (3, 4) should be routed through
outer channels.
Cables may be wrapped multiple times around cable management
cleat to take in slack.
2
3
4
1
5
6
7
14 2 3
4
3
21

4ENGLISH
USB
PC
INSTALLATION  PS5™ consoles, PS4™ consoles
 PC
Attach power adapter and USB cables as shown.
Every time your racing wheel connects with your system, it will
rotate fully to each side and then to the center to calibrate.
Yourwheel will be ready once this calibration is completed.
For PC to enable the force feedback and RPM LED features on
your G923 Wheel and Pedals, you must install the LogitechG HUB
software. This can be found at logitechG.com/support/G923-ps.
TRUEFORCE and advanced features require game integration.
Visit logitechG.com/support/G923-ps for a complete list of
supported games.
USB
PS4™consoles
PS5™consoles

5ENGLISH
MOUNTING CLAMPS
G923 Racing Wheel is equipped with
a built-in clamping system for mounting to a table.
Push down and rotate clamp knobs to lock or unlock.
Rotate clamp knobs to tighten or loosen clamps.
Note:
Clamp extenders should be removed for attachment
tothickertables.

6ENGLISH
BUTTONS
1 Steel paddle shifter
2 Directional pad
3 L2 and R2 buttons
4 L3 button*
5 +/- Setting Adjustment buttons*
6 Steel paddle shifter
7 H, J, K, Lbuttons
8 Share/Create button
9 R3 button*
10 24-point selection dial and button
11 OPTIONS button
12 PS button
2
3
5
4
1 6
7
8
10
11
9
* Requires supported games on PS5™ consoles/PS4™consoles. Assignable in any
game on PC using either in-game assignment or Logitech G HUB software.
12

7ENGLISH
FORCE FEEDBACK
Your Racing Wheel contains dual motors that will provide force
feedback with supported games and systems.
In supported titles, you will also experience our next generation
approach to force feedback: TRUEFORCE.
TRUEFORCE integrates directly with game physics and audio
to unlock high-denition, real-time force feedback. Tire grip,
suspension, weight, horsepower—even unique engine sound
resonance—are immediately and accurately felt through
thewheel.
Supported titles on PlayStation®5 consoles, PlayStation®4
consoles and PC may implement TRUEFORCE high-denition
force feedback. For a list of supported titles, visit
logitechG.com/support/G923-ps
Note:
Your Racing Wheel has an overheat protection circuit safeguard
to protect it under high-temperature operating conditions.
Inrare instances, force feedback features may shut down during
use while controls continue to operate.
If this occurs, allow the wheel to cool down and power it down by
unplugging it. If this occurs frequently, contact product support.

8ENGLISH
FEATURES
1 Clutch pedal
2 Brake pedal
3 Throttle pedal
4 Textured heel rest
1 2 3
4

9ENGLISH
5 Bolt mounting points (uses M6X1 bolts)
6 Patented carpet grip system
7 Carpet grip release clip
Push towards rear of pedal unit to release
8 Change pedal face position (requires 2.5mm hex key)
5
6
7
8

10 ENGLISH
USING THE DUAL CLUTCH INGAME
Using a dual clutch system from a grid start in a race
enables you to achieve maximum traction without the need
tond thebite point of your clutch pedal - this can give you
asignicant advantage at the start of a race.
To use the dual clutch system in-game:
1 At race start, fully depress the clutch pedal and the button
assigned to the dual clutch function (see next section for
setting instructions).
2 Select rst gear using the Gear Up Paddle and fully depress
the gas pedal.
3 As soon as you get the green light for race start, immediately
release the Dual Clutch button. The car should start moving
as the bite point of the clutch is engaged.
4 Smoothly release your foot from the clutch pedal in order to
achieve maximum traction. It’s worth practicing this last step
and modifying the bite point setting several times to nd
amethod that works for you. Once you have it perfected,
thisfeature can help make up several places on the grid.
Note:
Support for the dual clutch function is not possible in some
games. A list of games that support the dual clutch feature can
be found at logitechG.com/support/G923-ps
Note:
Whilst in the Dual Clutch setting mode, the RPM LEDs will not
respond to the game/SDK
SETTING UP THE DUAL CLUTCH SYSTEM
1 Press and hold the left and right steel paddle shifters L3
andR3 buttons together for two seconds to enter dual
clutchsetting mode. The RPM LEDs will illuminate blue and
ash slowly:

11 ENGLISH
2 Press the button you want to set as the dual clutch button.
The only valid buttons for this are the L3 and R3 buttons.
TheRPM LEDs will ash red to show that you’re in clutch
position setting mode.
3 While in your chosen simulation or game with the car still on
a track, fully depress the clutch and gas pedals. Engage rst
gear and keep pressing the minus button down until the car
begins to move in-game. You can adjust the precise bite point
of the clutch by using the plus and minus buttons until you
are happy with the setting.
4 At this point, you may test the dual clutch without
leaving thesetting mode. It is recommended you attempt
aracestart, stop the car and adjust the bite point and
thentry again until you are satised with the performance
ofthe dual clutch.
5 Press the Select button in the middle of the dial on the wheel
to exit dual clutch setting mode. The RPM LEDs will ash
ina sequence from green to blue to show that the setting is
saved. The RPM LEDs will then go out and begin responding
again to RPM output from supported games.

12 ENGLISH
RESETTING DUAL CLUTCH SYSTEM
Press and hold the left gear shift, right gear shift, and square
button for two seconds.
The RPM LEDs will all ash four times and then extinguish
toindicate that the Dual Clutch system has been reset.
The button assigned to the Dual Clutch system (L3 or R3)
willrevert to its normal function.
USING LOGITECH G HUB
Logitech G HUB enables the following features on the G923:
• Button programming with proles that can be linked
togames.
• Adjustment of wheel settings, such as Rotation Angle
andTRUEFORCE strength.
• Testing of the various buttons, wheel and pedal functions.
G HUB WHEEL SETTINGS
Sensitivity
Alters the output response of the wheel to be more or less
sensitive. Leaving this slider at 50% will provide a linear 1:1
output. Between 51% and 100% will make the wheel increasingly
more sensitive around the center movement of the wheel.
Between 0% and 49% will make the wheel decreasingly sensitive
around the center movement of the wheel.
Operating Range
The G923 is capable of up to 900 degrees of rotation. Reducing
this setting will change the point at which the wheel will reach
full steering lock. This is especially useful if you’re driving a car
with a smaller actual steering lock angle, such as a Formula 1
orGT3 car.
Centering Spring (for games without force feedback)
Most games that support force feedback already model
thecorrect return to center function of the G923 based on
thevirtual car. It is recommended that the Centering Spring
option be turned o for these games.
Enabling the Centering Spring option will allow you to override
the game features and adjust the strength of the return
tocenter force using the provided slider.
Torque
Only available for TRUEFORCE supported games. Torque controls
the overall force feedback strength for your G923.

13 ENGLISH
Audio Eects
Only available for TRUEFORCE supported games.
Controlstheoverall strength of the audio-related eects
(enginenote, rumble strips etc.) when using TrueForce-
compatible titles.
If you are using your G923 in older titles that do not support
TRUEFORCE, then adjustment of the force feedback can be
performed from the settings menus of the game title.
G HUB PEDALS SETTINGS
Sensitivity
Alters the output response of the pedals to be more or less
sensitive. Leaving this slider at 50% will provide a linear 1:1
output. Between 51% and 100% will make the pedal increasingly
more sensitive around the initial movement of the pedal.
Between 0% and 49% will make the pedal decreasingly sensitive
around the initial movement of the pedal.
Combined Pedals
If checked, this will set the gas and brake pedals to become
twohalves of a single axis. This will help the pedals operate
correctly in older racing titles that do not support separate axes
for pedals.
Note:
If left checked then the pedals will not behave correctly in
modern racing titles. If you nd that just one of your pedals
isfunctioning by accelerating when pressed and braking
whenreleased then you should make sure that this option
isnotchecked.
QUESTIONS?
Please visit logitechG.com/support/G923-ps for more information
or to get in touch with a customer representative.
TESTING YOUR WHEEL AND PEDALS
On the wheel and pedals screens in G HUB, you can check every
button and axis on your G923 in order to ensure everything
isfunctioning correctly. For the wheel you can also see the eect
of altering the Operating range.

14 DEUTSCH
VERBINDUNGEN UND
BEFESTIGUNGSPUNKTE
1 Befestigungsklammern
2 Kabelführungsklemme
3 Optionale Schalthebelverbindung (DB-9-Stecker)
4 USB-Kabel
5 Pedaleinheitsverbindung (DB-9-Buchse)
6 Stromanschluss
7 Befestigungspunkte (für M6X1-Schrauben)
OPTIMALE KABELFÜHRUNG
USB- und Pedalkabel (1, 2) sollten über interne Kanäle
geleitetwerden.
Netz- und optionale Schaltkabel (3, 4) sollten über externe
Kanäle geleitet werden.
Kabel können mehrfach um die Kabelführungsklemme
gewickeltwerden, um die Kabel zu straen.
2
3
4
1
5
6
7
14 2 3
4
3
21

15 DEUTSCH
USB
PC
INSTALLATION  PS5™-Konsolen,
PS4™-Konsolen
 PC
Bringe das Netzteil und die USB-Kabel wie dargestellt an.
Immer wenn das Rennlenkrad eine Verbindung zum System
herstellt,dreht es sich zur Kalibrierung einmal vollständig auf
jedeSeite und dann zur Mitte. Das Lenkrad ist einsatzbereit,
sobalddiese Kalibrierung abgeschlossen ist.
Um die LED-Funktionen für Force Feedback und Drehzahl für
dasG923 Lenkrad mit Pedalen auf dem PC aktivieren zu können,
muss die Logitech G HUB Software installiert sein. Dies ist verfügbar
unter logitechG.com/support/G923-ps.
TRUEFORCE und erweiterte Funktionen erfordern Integration im
jeweiligen Spiel. Eine vollständige Liste aller unterstützten Spiele
ist verfügbar auf logitechG.com/support/G923-ps.
USB
PS4™-Konsolen
PS5™-Konsolen

16 DEUTSCH
BEFESTIGUNGSKLAMMERN
Das G923 Rennlenkrad verfügt über eine integrierte
Klemmvorrichtung zur Tischmontage.
Drücke die Klemmhalterungen nach unten und drehe sie
zumSperren oder Entsperren.
Drehe die Klemmhalterungen zum Festziehen oder zum Lockern
der Klemmen.
Hinweis:
Für das Anbringen an stärkeren Tischplatten sollten
dieKlemmenerweiterungen entfernt werden.

17 DEUTSCH
TASTEN
1 Stahl-Schalthebel am Lenkrad
2 D-Pad
3 Tasten L2 und R2
4 L3-Taste*
5 +/- Tasten zum Anpassen der Einstellungen*
6 Stahl-Schalthebel am Lenkrad
7 Tasten H, J, K, L
8 Taste Teilen/Erstellen
9 R3-Taste*
10 Auswahlregler mit 24 Positionen und Taste
11 OPTIONS-Taste
12 PlayStation-Taste
2
3
5
4
1 6
7
8
10
11
9
* Auf PS5™-/PS4™-Konsolen sind unterstützte Spiele erforderlich. Zuweisbar in jedem
Spiel für PC durch Zuweisen im Spiel selbst oder über die Logitech G HUB Software.
12

18 DEUTSCH
FORCE FEEDBACK
Das Rennlenkrad enthält Doppelmotoren, die Force Feedback
fürunterstützte Spiele und Systeme erzeugen.
In unterstützten Titeln erlebst du außerdem unsere Force-
Feedback-Technologie der nächsten Generation: TRUEFORCE.
TRUEFORCE ist direkt integriert in die Spielphysik und
dieAudiowiedergabe für HD-Force-Feedback in Echtzeit.
Reifenhaftung, Federung, Gewicht, Motorleistung – und sogar
einzigartige Motorengeräusche – sind verzögerungsfrei und
deutlich über das Lenkrad spürbar.
Unterstützte Titel für PlayStation®5, PlayStation®4 und
PC können TRUEFORCE High Denition Force Feedback
implementieren. Eine Liste der unterstützten Spiele ist verfügbar
auf logitechG.com/support/G923-ps
Hinweis:
Das Rennlenkrad verfügt über eine Sicherheitskreisschaltung
zum Schutz vor Überhitzung bei Betriebsbedingungen mit
hohen Temperaturen. In seltenen Fällen kommt es während
der Nutzung zu einem Ausfall der Force Feedback Funktionen,
während die Steuerung weiterhin funktioniert.
Wenn dies passiert, muss das Lenkrad auskühlen und der
Netzstecker abgezogen werden. Wenn es regelmäßig vorkommt,
kontaktiere den Produktsupport.

19 DEUTSCH
PRODUKTEIGENSCHAFTEN
1 Kupplungspedal
2 Bremspedal
3 Gaspedal
4 Strukturierte Fußablage
1 2 3
4

20 DEUTSCH
5 Befestigungspunkte (für M6X1-Schrauben)
6 Patentiertes Antirutschsystem
7 Antirutsch-Rastfeder
Zum Lösen Richtung Rückseite der Pedaleinheit drücken
8 Position der Pedaloberäche ändern (2,5-mm-
Innensechskantschlüssel erforderlich) 5
6
7
8