
3
1.Introduction
ModemInstallationCDisanAll‐In‐OneinstallationutilityforbothinternalandexternalFax,
Voice/FaxandVoice/FaxwithSpeakerPhoneAnalogModems.Itautomaticallydetectsand
installsrecentlyinstalledmodemhardwareunderWindows98SE,ME,2000,XP,Vistaand
Windows7.ThisutilityincludesInstallDriverandUserManual.ClickInstallDrivertostart
analogmodemdevicedriverinstallationprocess.UserManualincludesthisuser’smanual
andspecsforallmodemsthisutilitysupports.
1.1 SystemRequirements
zPentium100MhzCPUorfaster
z32MBsystemmemoryormore
z10MBfreespaceonyourharddrive
z256‐colorVGAorhigherresolution
zCD‐ROMdrive
zOneavailablePCIslotforinternalmodem;oneavailableUSBconnectororRS232
connectorforexternalmodems
zMicrosoftWindows98SE,ME,2000,XP,VistaorWindows7operatingsystem
1.2 PackageContents
zOneinternal/externalAnalogModem
zOneRJ‐11Cable
zOneUSBCableforUSBmodel;OneRS232CableforRS232model
z9VACadapterforRS232AnalogModem
zFaxModemInstallationCDCD‐ROMdisk
zQuickInstallationGuide
Ifanyofaboveitemsismissingordamaged,pleasecontactyourlocaldealerimmediately.
2.HardwareInstallationInstructions
2.1PCIInterfacedAnalogModemCard
1) OpenPCcaseandinsertPCICardintoanavailablePCIslot.
2) ClosePCcase,thenplugoneendofRJ‐11cablesintomodem’sLINEjackandtheother
endintotelephonewalljack.
2.2RS232AnalogModem
1) ConnectmodemandPCwithRS232cable.
2) PlugoneendofRJ‐11cableintomodem’sLINEjackandtheotherendintotelephone
walljack.
3) PluginACpoweradapter.