Lorex ACCWIFI1 User manual

ACCWIFI1_QSG_EN_R1 Page 1
www.lorextechnology.com
WIFI REMOTE CONNECTION CRADLE
ACCWIFI1
QUICK START GUIDE
1
2
OR
OR
1 second
Getting Started
Connect the power adapter to the camera(s). Connect the other end to a power
outlet.
Turn on the camera(s).
Connect the cradle power adapter to the cradle. Connect the other end to a
power outlet.
4
5
Power/network
connector
Place the monitor onto the power/network connector on the cradle.
The monitor will charge when connected to the cradle.
It takes 5 hours to fully charge the monitor.
6Download the free Lorex Care app for iOS or
Android™ on your smartphone or tablet.
See reverse to complete setup.
3Connect the cradle to your router using an Ethernet cable (included).
INTERNET
NOTE: Ensure the switch on the back is set to INTERNET mode. DIRECT mode is
for service use only. Disconnect and reconnect the power adapter after changing to
INTERNET mode.
When someone is connected to the
cameras using a smartphone or
tablet, recording is stopped and you
will not be able to use the buttons or
menus on the handheld monitor.
See the WiFi Remote Connection
Cradle User Guide for more
information.
ATTENTION

ACCWIFI1_QSG_EN_R1 Page 2
www.lorextechnology.com
iPhone®/iPad® Setup
WIFI REMOTE CONNECTION CRADLE QUICK START GUIDE
OR Android™ Setup
1Touch the Lorex Care icon to launch the app.
NOTE: If your device does not have a camera, Tap Add and manually
enter the UID printed below the QR code on the side of the cradle.
Select your device
to connect
Scan the QR code on the side of the
cradle using your device’s camera.
iPhone®/iPad® Wi-Fi Setup (Optional)*
2
3
4
5
6
Open the Device List screen in Lorex
Care. Press Back if you are currently
connected to a camera.
Tap next
to the cradle
Press 3 times to return to the
Device List.
Select your device to connect
Remove the Ethernet cable from
the cradle.
Select your
Wi-Fi network
The cradle will scan for available Wi-Fi
networks.
1
3
5
2
4
The app will connect to your system and stream
live video from your cameras.
7
8
9
Enter the password for your
Wi-Fi network then tap Join
6
Congratulations! You have successfully
connected the cradle to your Wi-Fi network.
You can now place the cradle in any location
with good signal to your Wi-Fi network.
NOTE: You may be prompted to select the app that
will be used to scan the QR code. Select Google and
press Always to continue.
Open the Device List screen in
Lorex Care. Press if you are
currently connected to a camera.
Tap Manage
Wi-Fi networks
The cradle scans for available
Wi-Fi networks.
Tap here. Then,
select your Wi-Fi
network
Enter your Wi-Fi
network’s password
Tap OK
Tap OK twice to return to the
Device List.
Remove the Ethernet cable from
the cradle.
1Touch the Lorex Care icon to launch the app.
2
3
4Scan the QR code on the side of the cradle using your
device’s camera.
Enter the default password
000000
Enter a name for your system
Tap OK
5
6
The app will connect to your system and stream
live video from your cameras.
Android™ Wi-Fi Setup (Optional)*
Tap next
to the cradle
1
2
3
4
5
6
7
9
10
Congratulations! You have successfully
connected the cradle to your Wi-Fi network.
You can now place the cradle in any location
with good signal to your Wi-Fi network.
NOTE: If your device does not have
a camera, Tap UID and manually
enter the UID printed below the QR
code on the side of the cradle.
Wait until it says connected under
your network’s name.
8
Tap QRCode
Enter a name for
your system
Enter the default
password 000000
• • • • • •
Tap Save
Tap
Advanced
Setting
Tap WiFi
Tap Click here
to add device
Tap Scan
Select your device
to connect
Tap Edit
Device
Tap Advanced
Select your device to connect
* If your wireless network name (SSID) contains a space, you must change it to omit any spaces.
Check your router’s user guide for details on how to change the network name.