Lorex SG8840 User manual

LOREX Technology Inc.
Copyright © 2006 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod-
ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
Quick Setup Guide
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
Camera Specifications:
Wireless Receiver Specifications:
* 4 Available channels for optimal signal.
** Maximum open space transmission range. Actual range dependent upon
building materials and other obstructions in path of wireless signal.
Dimensions:
4. Specifications H O M E & B U S I N E S S S E C U R I T Y
2.4 GHz Wireless Color
Video System
with Rechargable Lithium Battery
Model SG8840
Image Sensor 1/3” CMOS
Minimum Illumination
Transmission Frequency
Power Supply
Battery Type/Capacity
Charge Time
Work Time
Camera Dimensions
(W x D x H)
1.5 Lux / F1.5
ISM 2.4~2.483 MHz (4 CH*)
+5V (DC), 700 mA
Lithium Battery / 500 mAh
2 hr. charge
Up to 5 hrs (less in IR mode)
3.5” x 1.25” x 1.25”
10cm x 3cm x 3cm(
Operating
Temperature Range
14°F ~ 122°F
-10°C ~ 50°C
Receiving Frequency ISM 2.4~2.483 MHz (4 CH*)
Video Output Level
Audio Output Level
Power Supply
Consumption Current
Unobstructed Range
1 Vp-p@75OHM,S/N>38DB
1 Vp-p@600OHM
8V (DC)
180 mA
Up to 328 ft. / 100 meters **
Receiver Dimensions
(W x D x H)
4” x 0.75” x 3.25”
10cm x 2cm x 8.5cm(
Operating Temperature 14°F ~ 122°F
-10°C ~ 50°C
Operating Humidity 85% RH
Wireless Disclaimer
This product broadcasts over public airways and its video and audio
signals may be intercepted without your consent.

1. Confirm Package Contents 2. Camera & Receiver Setup 3. Viewing the Camera
1 x 2.4 GHz Wireless
Color Camera with
Adjustable Stand
1 x Wireless Receiver,
Antenna and Bracket
1 x AV Cable
1 x Power Adapter for
Camera
1 x Power Adapter for
Wireless Receiver
Features:
• Turns your TV into a Video Security System
• Install and Operate in less than 1 minute
• Portable - Move the camera from room to room
• Integrated rechargable Lithium battery powers the
camera for up to 5 hours
• Audio Monitoring
• 4 Channels available for selecting optimum clear
reception
• 300 ft. wireless transmission (open space) *
• Automatic IR illumination provides B&W Video
images in low light conditions **
• Record picture to any standard VCR / DVR
*Maximum open space transmission range. Actual range dependent upon
building materials and other obstructions in path of wireless signal.
** IR illumination range of 12ft. under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on the camera
application..
1. Set up the Camera:
A: Mount the camera to a wall, ceiling or tabletop
using the supplied screws, or leave unat-
tached for portability.
B: Connect the 5V power adapter to the camera
(make sure the camera is OFF). Plug the
Adapter into a wall outlet.
A: Attach the Wireless Receiver to the bracket.
B: Attach the Antenna to the Wireless Receiver
C: Connect the 8V power adapter to the Wireless
Receiver.
Plug the Adapter into a wall outlet.
D: Connect the Wireless Receiver to a Monitor/TV
using the AV Cable:
•Connect the Black end to the Receiver
•Connect the Yellow/Red plugs to the VIDEO/
AUDIO port on the TV
2. Set up the Wireless Receiver:
The camera can be viewed immediately (with the AC
Adapter connected from the camera to a wall outlet),
however if portability is desired, the Cameras’ Lithium
Battery much be charged for 2 hours. The Camera is
charged when the Charge Light Indicator goes dark.
A: Power up the Camera and Receiver
B: Set the Camera to CH1 (the Wireless Receiver
is set to CH1 by default)
C: Set the Monitor / TV to Video Mode - See your
specific MONOTOR / TV Manual for further
information.
3. Viewing the Camera
IMPORTANT:
You may find some static on the picture at a
selected channel setting.
For optimum viewing reception, you may need to
change the channels on BOTH the Camera and
Receiver (between CH1-CH4). BOTH the
Camera and Receiver must be set to a matching
channel.
If Static persists on your image, try adjusting the
Antenna on the Wireless Receiver and Camera,
or reposition the camera.
Note: The camera needs to be charged for 2
hours before it can run on battery power.
YOU SHOULD NOW SEE LIVE
VIDEO ONSCREEN!