Lorex VQ1030R User manual

VQ1030R -WEATHER PROOF B&W
BULLET CAMERA WITH SUNSHADE
Overview
§Weatherproof Design
§Equipped with Removable Sunshade
§1/3" B&W CCD imaging device
§Resolution: 380 TV Lines
§Mounting bracket and power supply
included
Package Contents:
§Check the package for the following
contents listed below.
Installation Instructions:
§Install bracket in the desired camera
location using the three mounting
screws provided.
§Mount camera onto the bracket
§Apply power to the camera (using
supplied 12V DC Adapter)
§Connect the video cable to the BNC
connector (provided) if connecting to a
TV/Monitor or DVR with a BNC input
§Adjust the camera direction for the
desired picture view.
Note:If you are using the RCA video cable
to connect the camera to a TV you must
tune your television to an auxiliary (AUX),
A/V or video mode to view the camera
(Note: Consult the TV’s Owner’s Manual
for setting the TV to an auxiliary, A/V or
video mode.)
VQ1030R -WEATHER PROOF B&W
BULLET CAMERA WITH SUNSHADE
Specifications
As our products are subject to continuous
improvement, SVII and its subsidiaries reserve the
right to modify product design, specifications and
prices, without notice and without incurring any
obligation. E&OE.
Image
Sensor 1/3" Interline transfer type
B&W CCD
Effective
Pixels 510H x 492V (250K)
Scanning
System 525 Lines 2:1 Interlace
Scanning
Frequency 15.734KHz (H), 59.94Hz (V)
Resolution 380 TV-Lines
Shutter
Speed 1/60 ~ 1/100,000 sec.
S/N Ratio More than 48dB (AGC off)
Sync.
System Internal
Min.
Illumination 0.5 LUX (F2.0)
Gain Control
Automatic
Video Output
1.0 Vp-p (75? load)
Lens Fixed (3.6mm)
Power
Supply DC12V ± 10%
Power
Consumption<100mA (DC12V)
Operating
Temp -10 to +45 C / 14 to 113F
Operating
Humidity 90% RH Max.
Camera
and Stand
Manual
Power
Supply

VQ1030R
WEATHERPROOF B&W
BULLET CAMERA WITH
SUNSHADE
Distributed By:
Lorex Technology Inc
300 Alden Road, Markham,
Ontario Canada L3R 4C1
For more information, visit:
www.lorexcctv.com