LOTIE Elin User manual

INSTRUCTION MANUAL
Elin bed.

INTRODUCTION
Thank you for purchasing the Elin junior bed. For safety reasons, please read the
assembly instructions carefully before starting to assemble this product.
Check the contents of the package before the product is assembled. A complete
summary of the contents of the package can be found on the following pages. In
the unlikely event you are missing something, please contact the dealer who sold
you the product.
This product takes about 10 minutes to assemble. It requires 1 person to
assemble the bed.
This package contains small parts, that must be kept away from small children.
A hex key must be used to assemble the bed. This is not supplied along with the
bed.

ATTENTION
CARE AND MAINTENANCE
For the sake of your child’s safety, we recommend you to regularly check that all screws
and bolts are tightened so that the bed cannot slide apart. Retighten if necessary. Also
check that there are no loose screws or other small items, that the child can snag or
swallow.
Warning; Be aware of the risk of open fire and other sources of strong heat, such as
electric bar fires, gas fires, etc. in the near vicinity of the cot;
Warning; Do not use the cot if any part is broken, torn or missing and use only
spare parts approved by the manufacturer;
Warning; Do not leave anything in the cot or place the cot close to another
product, which could provide a foothold or present a danger of suocation or
strangulation, e.g. strings, blind/curtain cords;
Warning; Do not use more than one mattress in the cot.
A
B
C
D
All products are aected by sunlight – even the most colourful and colourfast products
can fade. Therefore, protect the product from direct sunlight.
Wood is a sturdy and living natural material. The structure and colours change during the
life of the product due to the continuous transformation process the wood goes through.
Wood adjusts to its environment, so avoid placing the product in a room where the
humidity fluctuates and always protect the product against powerful heat sources such as
radiators, fireplaces and so on because this could aect or at worst destroy the structure
of the wood.
Clean varnished wood products with warm soapy water and a damp cloth. Always use a soft
cloth to avoid scratching, and always wipe o with a slightly damp cloth. Never use abrasive
cleaning agents, bleaches or sharp objects

PARTS
x2 x8
x2
x1
A
C
B
D

1.
A
B
C
x8

2.

3.
SWEET DREAMS

Zinkweg 152 3262 BG Oud Beijerland The Netherlands
[phone] / [email protected]