LOTIE Oskar cabinet User manual

INSTRUCTION MANUAL
Oskar cabinet.

INTRODUCTION
Thank you for purchasing the Oskar cabinet. For safety reasons, please read the
assembly instructions carefully before starting to assemble this product.
Check the contents of the package before the product is assembled. A complete
summary of the contents of the package can be found on the following pages. In
the unlikely event you are missing something, please contact the dealer who sold
you the product.
This product takes about 1 hour to assemble. It requires 2 persons to
assemble the bed. This package contains small parts, that must be kept away
from small children.
A hex key and screwdriver must be used to assemble the cabinet. This is not
supplied along with the bed. We do not recommend the use of power
drill/drivers for inserting screws, as this could damage the unit. Only use hand
screwdrivers.

ATTENTION
CARE AND MAINTENANCE
For the sake of your child’s safety, we recommend you to regularly check that all screws
and bolts are tightened so that the cabinet cannot slide apart. Retighten if necessary. Also
check that there are no loose screws or other small items, that the child can snag or
swallow.
Warning; Be aware of the risk of open fire and other sources of strong heat, such as
electric bar fires, gas fires, etc. in the near vicinity of the cot;
Warning; Do not use the cabinet if any part is broken, torn or missing and use only
spare parts approved by the manufacturer;
The cabinet is a tool, not a toy. Do not let children climb in and on the cabinet.
There is a small chance that the cabinet can fall if the cabinet is used incorrectly. If
you want to exclude this risk, you can attach the cabinet to the wall. Fixing devices
for the wall are not included. For advice on suitable fixing systems, contact your
local specialized dealer.
A
B
C
D
All products are aected by sunlight – even the most colourful and colourfast products
can fade. Therefore, protect the product from direct sunlight.
Wood is a sturdy and living natural material. The structure and colours change during the
life of the product due to the continuous transformation process the wood goes through.
Wood adjusts to its environment, so avoid placing the product in a room where the
humidity fluctuates and always protect the product against powerful heat sources such as
radiators, fireplaces and so on because this could aect or at worst destroy the structure
of the wood.
Clean varnished wood products with warm soapy water and a damp cloth. Always use a soft
cloth to avoid scratching, and always wipe o with a slightly damp cloth. Never use abrasive
cleaning agents, bleaches or sharp objects

PARTS
x2
A
x1
Cx1
Dx2
Ex1
F
x2
B
..........
..........

x2
Gx1
H
x3
Jx1
K
x8 x8
x2 x4
x2
M
L
x12
O
PQ
N
x1
I

1.
2.
x8
N
H
A
A
B
B

3.
4.
M
C
x2
x2
+
P
x2
L
C F

..........
..........
5.
6.
G
F
x4
Q

..........
...
7.
8.
G
M
x2
D

9.
10.
..........
..........
x4
M
I
K

11.
12.
x12
..........
..........
click!
O
Jx3
x2
E

Zinkweg 152 3262 BG Oud Beijerland The Netherlands
[phone] / [email protected]