Love Brewing V20 User guide

HAND FRUIT PRESS
USE AND MAINTENANCE
V20 - V20 INOX V25
INOX V30 INOX

EMPLOI ET ENTRETIEN
USO E MANUTENZIONE
USE AND MAINTENANCE
GEBRAUCH UND WARTUNG
EMPLOI ET ENTRETIE
Modello
V 20 V 20 inox
model V20
Frame and painted INOX cage
model V20 / V25 / V30
Stainless INOX chassis and cage
Model Size cage Capacity cage Weight
Diam./h. cm. Lt. Kg.
V20
V20 INOX
V25 INOX
20x30
20x30
25x40
9
9
20
10
10
18
USE AND MAINTENANCE
Models
V20 V20 inox V25 inox V30 inox
V30 INOX 35
25
29x44

3
USE AND INTRODUCTION
Thank you for having purchased this mechanical wine press V20-V20 INOX-V25
INOX-V30 INOX. This manual deals with the maintenance and operation of the
machine. Reserves the right to make changes at any time without prior notice.
This manual should be considered an integral part of the machine and in such should
be kept with the machine until it is disposed of.
GUARANTEE
All claims must be made in writing within 8 days of delivery of the machine.
The purchaser can exercise his rights under guarantee only if he has fulfilled the
conditions relating to the provision of the guarantee, as described in the contract of
sale.
At the moment of receipt check that the machine has not been damaged.

4
MOUNT THE CAGE ON
DOCK AND MAKE SURE
EVERYTHING IS IN
THEIR PLACE

5
Fig. 3 - Pour the minced fruit in the cage after pla-
cing a container under the outlet spout.
Straighten the bow, close the two knobs and turn the tree “T” clockwise
until the full squeezing.

TO SET-ASIDE
At the end of the season, or if you plan a long period of non-use of this
equipment, it is recommended:
1) Wash and dry the equipment
IMPORTANT:
2) Carefully check for any damaged parts replaced and / or worn.
3) Tighten all the nuts, screws and bolts.
4) Make a thorough lubrication and ultimately protect all the equipment
with a cloth (not nylon) and store in a dry place.
IMPORTANT
IF THESE OPERATIONS ARE DONE WITH CARE, THE BENEFIT OF
THE USER WILL BE ONLY AS TO RESUME WORK YOU WILL FIND
AN EQUIPMENT PERFECT CONDITION READY FOR USE.
SPARE PARTS
Orders for spare parts must be made through your dealer.
Orders for spare parts must always be accompanied by the following infor-
mation:
1) Type of fruit press;
2) Number of the requested code;
3) Description of the requested party and quantity;
4) Means of transport (to be agreed with the client).
The transport costs are quoted at consignee.
8

9
SPARE PARTS

1
2
3
4
6
11
7
8
F.LLI BAESSO
V 20 V 20 INOX
5
9
10
V20 - V20 INOX - V25 INOX - V30 INOX
10

I D ENGL
RIF. CODICE COD. INOX QUA. DENOMINAZIONE BESCHREIBUNG DENOMINATION
1 V 20.01 V 20-25.01 X 2 Manopola Knopf Knob
2 V 20.02 V 20-25.02 X 1 Albero a “T” fil. Tree das “T” Tree the “T” e.
3 V 20.03 V 20-25.03 X 1 Dado Nuss Nut
4 V 20.04 V 20-25.04 X 1 Vite 8X25 8x25 Schraube 8x25 screw
5 V 20.05 V 20-25.05 X 1 Telaio Rahmen Frame
6 V 20.06 V 20-25.06 X 1 Bussola filettata Gewindehülse Threaded sleeve
7 V 20.07 V 20-25.07 X 1 Bussola liscia Glatten Kompass Smooth compass
8 V 20.08 V 20-25.08 X 1 Piatto premente Pressplatte Pressing plate
9 V 20.09 V 20-25.09 X 1 Rondella Scheibe Washer
10 V 20.10 V 20-25.10 X 1 Pomello ch. arco ch-Regler. Bogen
Bow closing knob
11 V 20.11 V 20-25.11 X 1 Gabbia Käfig Cage
11

500 - 4/2018 - PRESSAFRUTTA MANUALE