Lovencare HK 993 User manual

IMPORTANT
BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS.
Do not use mattress other than the one supplied by the manufacturer.
Incorrect mattress can cause death.
Use only accessories as recommended by the manufacturers.
Ensure the top rails and base are fully locked.
Stop using this cot if any part of the cot is broken, torn or missing.
3-in-1
TRAVEL COT
sleepngo
HK 993
KEEP T HESE INS T RUCTIONSIN A SAFE P LACEFORF U T URE REFERENCE.

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

WARNING
(A) KEEP CHILDREN AWAY WHILE ASSEMBLING/DISASSEMBLING THE COT.
(B) DO NOT LEAVE ANYTHING ON THE FOLDING COT (SUCH AS TOYS) THAT PROVIDE
A FOOTHOLD.
(C) DO NOT USE THE FOLDING COT NEAR NAKED HEAT SOURCES, BAR HEATERS, OPEN
FIRES OR EXPOSED FLAMES.
(D) KEEP THE FOLDING COT CLEAR OF TRAILING CABLES AND HANGING CORDS.
(E) KEEP MEDICATION AND SMALL ITEMS THAT A CHILD COULD CHOKE ON, AWAY FROM
THE COT.
(F) YOU SHOULD DISCONTINUE USING THIS TRAVEL COT IF THE COVERING MATERIAL
HAS BEEN BITTEN THROUGH.
WARNING
(A) TO PREVENT FALLS, THE BASSINET MUST NOT BE USED ONCE A CHILD CAN
SIT UP.
(B) NEVER PLACE A CHILD IN THE COT WHEN THE BASSINET IS IN PLACE.
(C) DO NOT USE THIS COT WITH A CHILD WHO CAN CLIMB OUT, WEIGHS MORE
THAN 14KG OR IS TALLER THAN 90CMS.
MAXIMUM WEIGHT CAPACITY FOR THE TRAVEL COT IS 14KG
• USE ONLY THE MATTRESS SUPPLIED
BY THE MANUFACTURER, INCORRECT
MATTRESSES CAN CAUSE DEATH
• Use only Accessories As Recommended By
The Supplier
• Ensure The Top Rails And Base Are Fully
Locked.
• Do Not Use This Cot If Any Part Of The Cot Is
Broken, Torn or Missing
WARNING
MATTRESS SIZE:
THIS COT IS MADE TO USE A MATTRESS WHICH IS 750MM WIDE 1100MM
LONG AND NO MORE THAN 50MM THICK. USING THE WRONG SIZE
MATTRESS MAY CREATE HAZARDOUS GAPS THAT COULD RESULT IN
SUFFOCATION OR COULD REDUCE THE SIDE HEIGHT OF THE COT WHICH
MAY RESULT IN YOUR CHILD FALLING OUT FROM THE COT.

PARTS LIST
WHEN YOU OPEN YOUR TRAVEL COT CARTON PLEASE ENSURE
YOU HAVE ALL THE ITEMS:
1. TRAVEL COT CARRY BAG
2. BASSINET
3. FEMALE - RODS FOR BASSINET
4. MALE - RODS FOR BASSINET
5. MATTRESS
6. CHANGER HANDLES
7. CHANGER
8. TRAVEL COT
1.
2.
3. 4. 5.
6.
NO TOOLS NEEDED
7.
8.

ASSEMBLY INSTRUCTIONS
OPENING AND UNFOLDING
1. Unzip and remove
carry bag (1)
2. Remove the mattress (5) by
unfastening the velcro straps.
Remove the rods (4) and (5) and
Bassinet (2).
3. Widen the legs of the
travel cot
4. Ensure that the base is completely raised up.
Lift up the shorter sides. Pull up each until they
lock into place.
5. Lift up each of the longer sides. Pull up each rail
until it locks into place.
locking mechanism is folded on the base.
If all the sides are locked the cot should be safe.
7. Place the mattress (3) into the travel cot (6).
Fix the velcro fasteners under the mattress onto
the travel cot base.
WARNING: BEFORE PLACING THE CHILD INTO THE
TRAVEL COT ENSURE ALL THE LOCKING MECHANISMS
ARE FULLY ENGAGED.
PLEASE CARRY OUT THE ASSEMBLY OF THE CARRY COT IN THE ORDER BELOW:

ASSEMBLY INSTRUCTIONS
FOLDING THE COT
1. Remove the mattress from the travel cot
and pull the centre lever all the way up.
2. There are release buttons on each side of the travel
cot to release the arms. You must pull the arms up and
press the release buttons to loosen the arms.
Repeat on all sides.
3. Pull the travel cot together
and place all the items inside
4. Place the travel cot on top of the
mattress 5. Fasten the mattres around the
travel cot with the velcro straps
6. Insert the travel cot into the carry bag
store the poles and changer in the side pocket.

ASSEMBLY INSTRUCTIONS
USING THE BRAKES
When moving the travel cot from place to
place make sure the brake lever is in the
up position.
When the travel cot is stationary depress the
brake lever to apply the brakes.
Also when using the changer apply the brakes
for stability

CARE AND MAINTENANCE
To ensure your travel cot lasts a long time it is important that you try and maintan it.
To maintain the travel cot:
Wipe it down with a damp cloth and use a mild soap soltion if needed. Do not use
abrasive cleaners.
Always store this travel cot in a clean and dry place.
To maintain Bassinet and Mattress:
Wipe it down with a damp cloth and use a mild soap soltion if needed. Do not use
abrasive cleaners.
General Maintenance:
Always check parts regularly for tightness of screws nuts and other fasteners - tighten or
replace if required.
To maintain the safety of your travel cot, seek prompt repairs for broken, torn or damaged
parts.
Use only the parts and accessories approved by Love N Care.
on 1300 732 599.

12 MONTH WARRANTY
3-IN-1 SLEEP N GO
All Love N Care products are guaranteed for twelve months from the
date of purchase. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure. This covers against faults which develop
through faulty materials and workmanship.
Misuse, accidental damages,normal wear and tear or neglect are
not covered. If a fault becomes apparent, please return the item to
the store of purchase with your receipt. You must inform the storewhat
the defect is. We will then arrange for its repair or it will be
assessed for replacement as expediently as possible. The benefits
of this warranty are in addition to other right and remedies under the
law in relation to the goods or services to which this warranty relates.
If you are unable to return the item to the store of purchase, you can
contact Love N Care on free call 1300 732 599.
Where you send the product directly to the manufacturer then you
may be liable for the costs of transportation to and from Love N Care.
Love N Care will meet the reasonable expenses incurred by a consumer
in a making a warranty claim. You can claim expenses incurred in
making a claim by contacting our customer service team on
1300 732 599 or by email at [email protected]
WARRANTY AGAINST DEFECTS

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us