Lovencare SLEIGH CSC 25 User manual

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
SLEIGH COT
CSC 25

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
This exceptional design combines the most unique features that any baby product oers.
We are condent that you will appreciate its many highlights, including its reliability and durability.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

This cot has been designed for a child up to 25kg
Do not leave your child unattended when the dropside is in the lower position
RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measure
760mm wide by 1310mm long and 100mm in thickness.
sides and ends of the cot will not exceed 40mm. This is to minimize the risk of a childs limb becoming
is greater than 500mm with the mattress base in the lower position to minimise the risk of a child climbing
or falling out of the cot.
WARNING TO PREVENT FALLS, THE MATTRESS BASE OF THIS COR SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
The manufacturers assembly instructions must be followed in detail to ensure all the safety features of the
cot are not compromised.
Please ensure that the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Please keep medication, string, elastic,small toys or small items, such as money out of reach from any
position in the cot.
WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 100mm.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
AS/NZS 2172:2003 Cots for household use - Safety Requirements
WARNING

SCREW KIT
1# 6X40MM
10PCS
FOR DRAWER
2# 6X25MM
4 PCS
FOR BLOCK ENDS
3# 6X80MM
4 PCS
FOR DROP SIDE
4# 6X60MM
4 PCS
FOR BASE
5# 6X80MM
4 PCS
FOR FIXED SIDE
AND BED RAILS
2 X ALLEN KEYS

PARTS LIST

ASSEMBLY
ATTACH THE COT BASE TO THE COT ENDS
1. Select the appropriate base position on being either lower or upper.
2. When the base is being used on the upper position, use the 4# bolts to fix the base on
the upper holes of the cot ends. Attach the
2# BLANK ENDS to the lower holes on the cot ends to prevent fingers getting caught in
the holes.
3. When the base is being used on the lower position, use the 4# bolts to fix the base on
the lower holes of the cot ends. Attach the 2# BLANK ENDS to the upper holes on the
cot ends to prevent fingers getting caught in the holes. (Fig 1)
Note: in this step, do not tighten the bolts fully.
ATTACH THE FIXSIDE TO THE COT ENDS
4. Use four 5# Bolts to fix the FIXSIDE to the cot ends (Fig 2). Note: in this step, do not
tighten the bolts fully.
ATTACH THE DROPSIDE TO THE COT ENDS
5. Use four 3# Bolts to fix the DROPSIDE to the cot ends
TIGHTEN THE BOLTS
6. Test the DROP SIDE for easy movement, then tighten all the bolts on the COT and
retest the movement of the DROP SIDE to ensure its moving freely.

ASSEMBLE THE DRAWER
7. Use 1# bolts to assemble the drawer (Fig 4)
8. Place the drawer on the slides and push the drawer in (Fig 5)
TO RAISE THE DROPSIDE
1. To raise the DROPSIDE to the upper position, pull up the DROPSIDE with one or two
hands. When the DROPSIDE is raised to the upper position, the locks will click into
place by the spring pressure. (Fig 6)
TO LOWER THE DROPSIDE
2. put one hand to one corner of the DROPSIDE and the other hand to the other corner,
pull up the DROPSIDE, using both hands to press the locks inside at the same time to
release the DROPSIDE down to the lower position. (Fig 7)

CONVERTING TO THE JUNIOR BED
1. Remove the DROPSIDE and the FIXSIDE.
2. Assemble the side rails with FOUR 5# bolts (Fig 8)
3. Put the mattress to be used as junior bed ( Fig 9)
CONVERTING TO THE LOUNGE
Remove the DROPSIDE and keep the FIXSIDE attached to the cot to convert the cot to
be a lounge (Fig 10)

CARE AND MAINTENANCE
ALL LOVE N CARE PRODUCTS HAVE ONE YEAR WARRANTY FROM THE DATE OF PURCHASE.
IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN MOVEMENT OF LOCKING DEVICES AND SECURITY
OF ESSENTIAL COMPONENTS.
REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
YOUR FURNITURE MAY BE CLEANED BY WIPING WITH A DAMP CLOTH AND DRYING WITH A SOFT CLEAN CLOTH.
DO NOT USE ABRASIVES, BLEACH, ALCOHOL OR AMMONIA-BASED HOUSEHOLD POLISHES.
TAKE CARE WHEN HANDLING OR MOVING THE FURNITURE. CARELESS HANDLING MAY CAUSE DAMAGE.
CHECK THE COTS SCREWS AND LOCKS TO MAKE SURE THEY ARE ALL KEPT IN GOOD WORKING ORDER.
IF ANY OF THE PARTS ARE MISSING OR BROKEN YOU SHOULD CONTACT THE MANUFACTURER AND DISCONTINUE
USING THE COT UNTIL THEY ARE REPLACED.
Manufactured By:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 1300 732 599
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au

Head Office:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au
Contact Us
Brisbane
7-9 Eileen Street
Underwood QLD 4119 Australia
Contact No: 07 3290 4217
Fax: [phone]
Western Australia
5 Modal Crescent
Canning Vale WA 6155 Australia
Contact No: 08 9455 4972
Fax: [phone]