LOWE'S Nicole Curtis 1922VA-48-267-900-SR User manual

1
ATTACH YOUR RECEIPT HERE
Serial Number__________________ Purchase Date__________________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at
1-855-571-1044 , 9 a.m. - 5 p.m., EST, Monday - Friday.
48-IN VANITY WITH TOP
OR
OPTION 1
(Semi-Recessed Sink)
OPTION 2
(Undermount Sink)
Español p. 29
1922VA-48-267-900-SR Nicole Collection 1922 48 in Vanity Rustic Taupe/Semi-recessed Carrara Marble Top
1922VA-48-267-900-UM Nicole Collection 1922 48 in Vanity Rustic Taupe/Carrara Marble Top
1922VA-48-267-907-SR Nicole Collection 1922 48 in Vanity Rustic Taupe/Semi-recessed Pure White Top
1922VA-48-267-907-UM Nicole Collection 1922 48 in Vanity Rustic Taupe/Pure White Top
1922VA-48-267-926-SR Nicole Collection 1922 48 in Vanity Rustic Taupe/Semi-recessed Engineered Calacatta Top
1922VA-48-267-926-UM Nicole Collection 1922 48 in Vanity Rustic Taupe/Engineered Calacatta Top
1922VA-48-341-900-SR Nicole Collection 1922 48 in Vanity Wht Oak/Semi-recessed Carrara Marble Top
1922VA-48-341-900-UM Nicole Collection 1922 48 in Vanity Wht Oak/Carrara Marble Top
1922VA-48-341-907-SR Nicole Collection 1922 48 in Vanity Wht Oak/Semi-recessed Pure White Top
1922VA-48-341-907-UM Nicole Collection 1922 48 in Vanity Wht Oak/Pure White Top
1922VA-48-341-926-SR Nicole Collection 1922 48 in Vanity Wht Oak/Semi-recessed Engineered Calacatta Top
1922VA-48-341-926-UM Nicole Collection 1922 48 in Vanity Wht Oak/Engineered Calacatta Top
MODEL NUMBER DESCRIPTION
MODEL #
1922VA-48-267-900-SR; 1922VA-48-267-900-UM; 1922VA-48-267-907-SR;
1922VA-48-267-907-UM; 1922VA-48-267-926-SR; 1922VA-48-267-926-UM;
1922VA-48-341-900-SR; 1922VA-48-341-900-UM; 1922VA-48-341-907-SR;
1922VA-48-341-907-UM; 1922VA-48-341-926-SR; 1922VA-48-341-926-UM

2
TABLE OF CONTENTS FOR OPTION 1 (Semi-Recessed Sink)
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................3
Safety Instructions...........................................................................................................................3
Preparation......................................................................................................................................4
Assembly or Installation Instructions...............................................................................................4
Adjustment Door Panels (Optional)...............................................................................................12
Care and Maintenance...................................................................................................................13
Warranty.........................................................................................................................................13
Replacement Parts List.................................................................................................................14
TABLE OF CONTENTS FOR OPTION 2 (Undermount Sink)
Package Contents.........................................................................................................................16
Hardware Contents........................................................................................................................16
Safety Instructions.........................................................................................................................16
Preparation....................................................................................................................................17
Assembly or Installation Instructions..............................................................................................17
Adjustment Door Panels (Optional)...............................................................................................25
Care and Maintenance..................................................................................................................26
Warranty........................................................................................................................................26
Replacement Parts List.................................................................................................................27

3
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS (Semi-Recessed Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY CARTON
A Vanity 1
B Top 1
D Sink 1
C Backsplash 1
Box 2 of 3
Box 1 of 3
Box 3 of 3
GLeft Door (preassembled
to vanity (A)) 2
Box 2 of 3
FTip-out Door (preassembled
to vanity (A)) 1
HRight Door (preassembled
to vanity (A)) 2
I Center Shelf 1
K Floor Plumbing Cutout Lid 1
J Side Shelf 2
P Metal Decoration 4
E Sink Template 1
AA BB CC
Touch Up Pen
Qty. 1
Knob (2 Options)
Champagne
Brass (Qty. 4)
Brushed Nickel
(Qty. 4)
Handle (2 Options)
Champagne
Brass (Qty. 3)
Brushed Nickel
(Qty. 3)
Sink Template
C
B
A
GG
F
I
J
J
K
HH
D
E
P P P P

4
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
1. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 1). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
1
12
A

5
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
Note: A
t this stage it may be easier to install
the faucet and drain kit (not included) to top (B)
per the manufacturer’s instructions, before
moving on to Step 3.
3.
Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (B) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
2. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
up onto a scratch free surface such as a
foam sheet that came in the packaging.
2
Remove the top foam sheet
C
Foam sheet
C
Remove the backsplash and place
it on a scratch free surface
Remove the foam sheet
B
3
1
2
2
A
B

6
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
4. Put the sink template (E) on the top (B).
The hole in the cardboard needs to be
aligned with the hole in the stone top.
Make sure the sink template and stone top are
flush along the back edge.
5. Apply a thin bead of silicone caulk (not included)
onto the stone top close to the edge of the sink
cut out as pictured.
4
Sink Template
B
E
5
Sink Template
B
E

7
7. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
6. With the help of another adult, Gently lower
the sink onto the stone top using even
pressure to set the sink properly.
Make sure the sink over-flow hole is at the
front of wood cabinet.
If some silicone caulk has over-flowed please
clean it up at that time with water.
6
Sink Template
D
B
7
1
22
C
B

8
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
9. From the front of the assembly, insert shelf
pins at desired height, ensuring they are
level. Place center shelf (I) on top of shelf pins.
Repeat for the remaining side shelves (J).
8. The back of the vanity is open for accessibility
for drain(s) and water line(s) hookup. If your
plumbing comes out of the back wall, insert
the floor plumbing cutout lid (K), as shown in
Illustration 8. This will close the hole and
increase your storage space.
If your plumbing comes out of the floor, this
hole provides accessibility for drain and water
line hookup.
8
K
A
9
1
I
J
J
2
2
2

9
10. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
11. To change the handle on the tip-out door, gently
open the tip-out door (F) and use the
Phillips
screwdriver
to loosen the screws holding the solid
wood tip-out tray. Once loosened, simply lift and
slide up to remove (per diagram 11). This
provides access to the two door handle screws.
One set of knobs (BB)/handle (CC) are packaged
separately in the box. If you would like to
switch handles, simply remove the existing
handles and attach the other finish, as
illustrated in the diagram.
Repeat the same step for the drawers and
doors (G & H).
Note: This vanity base comes with two
different handles/knobs options.
BB
Hardware Used
Knob x 4
CC Handle x 3
10
2
2
22
2
2
b
1
1
c
1
c
3
a
1
a
3
11
2
1
CC
3
F
G
H

10
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
12. If you need to adjust the tip-out door, do so in the following manner.
To adjust tip-out door left or right, loosen screws (a) on both hinges, adjust tip-out door, and
retighten screws.
To adjust tip-out door up or down, turn screws (b) on both hinges, in or out.
To adjust tip-out door in or out, loosen screws (c) on both hinges, adjust tip-out door, and
retighten screws.
13. Re-hang the wood tray back inside of the top
tip-out door (F).
12
3
a
1
a
1
C
3
C
1
1
b
22
2
2
2
2
13
1
F
2

11
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to complete
the installation.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
14. As shown in the diagram, fully extend the
drawer and locate the plastic levers on the
metal glide tracks. Push the left-side and
right-side levers at the same time to
disengage the drawer from the drawer glides.
Gently lift the drawer up to remove it from
vanity (A).
15. To reinstall drawer(s) into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Note: Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
14
A
12
15
A
2
1
3

12
ADJUSTMENT DOOR PANELS (OPTIONAL) (SEMI-RECESSED SINK)
The pre-installed door panel can be switched from front to back.
1. Remove the silicone trim along the outer edges of the panel on the inside of the door. Start at
a corner and pull to remove the four pieces. Be careful not to damage the silicone trim as it will
be used to secure the panel.
2. Remove the panel from the door frame, then rotate the panel to reinsert it into the door frame.
3. Using your finger press the silicone trim back into place. Move around the outer edge of the
panels until all four sides are secure.
123
1
2
3
4
1
2
3
4

13
CARE AND MAINTENANCE
WARRANTY
IMPORTANT
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The stone top can be cleaned using standard marble cleaning agents available at your local
supplier.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water
and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not
responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local
home store. Follow the manufacturer’s directions on how to apply.
The manufacturer warrants this item against defects in materials and workmanship for a period of
one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain
the stone top. The manufacturer is not accountable whatsoever for product installation during the
warranty period. There is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection with
product use or performance except as may otherwise be accorded by law. The manufacturer
disclaims any and all implied warranties.

14
REPLACEMENT PARTS LIST FOR 1922VA-48-267-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
AA Touch-up pen M-1108
1922-CB KNOB
T-1007
BB Knob-champagne brass
1922-BN KNOBKnob-brushed nickel
1922-CB HANDLE
CC Handle-champagne brass
1922-BN HANDLEHandle-brushed nickel
B1044DD Shelf Pin
EE
Leveler
C-90-107
GG
Hinge
FF PUDTC-14X3-HANDLEDrawer Glide Set
PART DESCRIPTION PART#
Tip-out Door
F1922VA-48-267-TIP-OUT DOOR
Left Door
G1922VA-48-267-DOOR SET
Right Door
H
Center Shelf
I1922VA-48-267-CENTER SHELF
Side Shelf
J1922VA-48-267-SIDE SHELF
Floor Plumbing Cutout Lid
K267 FP LID
Tip-out Tray
L1922VA-48/60-267-WOOD TRAY
Drawer Front
M1922VA-48-267-DRAWER FRONT
PU21-1922VA-48-CB
METAL DECORATION
Metal Decoration-champagne brass
PU21-1922VA-48-BN
METAL DECORATION
Metal Decoration-brushed nickel
P
D SN047B
Sink
CPUBS-25-907-48 48" Pure White Backsplash
PUBS-25-900-48
48" Carrara Marble Backsplash
B3500VT-48-907 Complete Set 48" Pure White Top
PUBS-25-926-48
48" Engineered Calacatta Backsplash
3500VT-48-926
Complete Set 48" Engineered Calacatta Top
3500VT-48-900
Complete Set 48" Carrara Marble Top
E SN047B-TEMPLATE
Sink Template
DD EE GGAA FF
BB CC
B
G
M
L
C
E
D
F
H
P
J
I
K
Sink Template

15
REPLACEMENT PARTS LIST FOR 1922VA-48-341-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
AA Touch-up pen OF-0010
1922-CB KNOB
T-1007
BB Knob-champagne brass
1922-BN KNOBKnob-brushed nickel
1922-CB HANDLE
CC Handle-champagne brass
1922-BN HANDLEHandle-brushed nickel
B1044DD Shelf Pin
EE
Leveler
C-90-107
GG
Hinge
FF PUDTC-14X3-HANDLEDrawer Glide Set
PART DESCRIPTION PART#
Tip-out Door
F1922VA-48-341-TIP-OUT DOOR
Left Door
G1922VA-48-341-DOOR SET
Right Door
H
Center Shelf
I1922VA-48-341-CENTER SHELF
Side Shelf
J1922VA-48-341-SIDE SHELF
Floor Plumbing Cutout Lid
K341 FP LID
Tip-out Tray
L1922VA-48/60-341-WOOD TRAY
Drawer Front
M1922VA-48-341-DRAWER FRONT
PU21-1922VA-48-CB
METAL DECORATION
Metal Decoration-champagne brass
PU21-1922VA-48-BN
METAL DECORATION
Metal Decoration-brushed nickel
P
D SN047B
Sink
CPUBS-25-907-48 48" Pure White Backsplash
PUBS-25-900-48
48" Carrara Marble Backsplash
B3500VT-48-907 Complete Set 48" Pure White Top
PUBS-25-926-48
48" Engineered Calacatta Backsplash
3500VT-48-926
Complete Set 48" Engineered Calacatta Top
3500VT-48-900
Complete Set 48" Carrara Marble Top
E SN047B-TEMPLATE
Sink Template
DD EE GGAA FF
BB CC
B
G
M
L
C
E
D
F
H
P
J
I
K
Sink Template

16
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS (Undermount Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY CARTON
A Vanity 1
B Top 1
D Sink 1
C Backsplash 1
Box 2 of 3
Box 1 of 3
Box 3 of 3
GLeft Door (preassembled
to vanity (A)) 2
Box 2 of 3
FTip-out Door (preassembled
to vanity (A)) 1
HRight Door (preassembled
to vanity (A)) 2
I Center Shelf 1
K Floor Plumbing Cutout Lid 1
J Side Shelf 2
P Metal Decoration 4
HH II JJ KK LL
Lock Washer
Qty. 4
Nut
Qty. 4
Wrench
Qty. 1
Bolt
Qty. 4
Sink Bracket
Qty. 4
AA BB CC
Touch Up Pen
Qty. 1
Knob (2 Options)
Champagne
Brass (Qty. 4)
Brushed Nickel
(Qty. 4)
Handle (2 Options)
Champagne
Brass (Qty. 3)
Brushed Nickel
(Qty. 3)
C
B
A
GG
F
I
J
J
K
HH
D
P P P P

17
INSTALLATION INSTRUCTIONS (Undermount Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
1. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 1). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
1
12
A

18
INSTALLATION INSTRUCTIONS (Undermount Sink)
2. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
down onto a scratch free surface such as a
foam sheet that came in the packaging.
3. Apply silicone caulk (not included) to
the top edge of sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top.
Make sure the sink over-flow hole is facing
the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Note: To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the guide lines marked on the sink and
bottom side of stone top to assist with sink
location.
2
Remove the top foam sheet
Remove the foam sheet
Remove the cutout foam
sheet & hardware
Remove the top and place it
on a scratch free surface
Remove the backsplash and place
it on a scratch free surface
C
C
Foam sheet
B
BACK
FRONT
B
Foam sheet
BACK
FRONT
Hardware
Pack
B
BACK
FRONT
12
3
2
2
BACK
BACK
D
B
BACK
1
Sink Lip
Top
BACK
BACK

19
INSTALLATION INSTRUCTIONS (Undermount Sink)
Hardware Used
Bolt x 4
4. Screw bolts (HH) into the threaded holes of
stone top (B).
Hardware Used
Sink bracket x 4
Nut x 4
x 4Lock Washer
Wrench x 1
5. Lower the sink brackets (II) over the bolts
(HH) and allow to rest on the sink lip. Adjust
location of bracket to firmly grasp sink lip.
Lower lock washers (KK) over bolts (HH) and
secure with nuts (JJ). Hand tighten nuts (JJ)
with included wrench (LL).
DO NOT OVER TIGHTEN!
Tip: Check that the sink placement is well
centered front to back and side to side of the
stone top cut out before allowing the silicone
caulk to dry. If the sink is not centered well
unscrew sink clamps, re-adjust the sink position
and re-tighten the sink brackets.
HH
II
JJ
KK
LL
4
HH
D
B
BACK
BACK
5
1
II
LL JJ
KK
HH
3
2
D
B
BACK
BACK

20
INSTALLATION INSTRUCTIONS (Undermount Sink)
6. To install the Top (B) to the vanity (A).
Apply silicone caulk to the top edge of the
wood cabinet. With the help of another adult,
gently lower the stone top with assembled sink
onto the cabinet. Make sure the stone top is flush
with the back side of the wood cabinet and the
stone overhang is equal on both sides over the
wood cabinet left and right side walls. Remove
any excess caulk before allowing to dry.
Helpful tip: it may be easier to install your
choice of faucet (not included) before securing
the vanity top (B) to vanity base (A).
7. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
6
1
2
2
A
B
7
1
22
C
B