Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,
ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW
COMPAC®20A Surge Suppressor hardwired
©2012 Lowell M nuf cturing Comp ny, 100 Integr m Dr., P cific MO 63069. Phone–800.325.9660
F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to
ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)
Spec. No. 1128
(rev. 02.08.12)
pg. 1 of 3
Model No. Description Outlets Amper ge Termin tion GTF Over/Under Protection Remote Control C p ble
ACSP-2002-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No No
ACSP-2002-VTE-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No Yes No
ACSP-2002-RPC-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No Yes
ACSP-2002- G-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No No
ACSP-2002- G-VTE-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No Yes No
ACSP-2002- G-RPC-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No Yes
ACSP-2002-GTF-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired Yes No No
ACC-1ME Mounting Ears (1-pr)
Description
The COMPAC®advanced surge suppressor provides the highest
current capacity available in devices of its size to protect multiple
pieces of sensitive electronic equipment on a single circuit. t fea-
tures industrial strength “zero failure” technology backed by a ten
year warranty. t also includes a patented* rotating outlet plate that
makes it easy to change the position of the outlets from top to side
access. The compact body has a very low profile (1.75"H x 6"D x
9"W) and includes two mounting brackets to promote easy instal-
lation — on a wall behind a flat panel TV, under a counter, in a
rack or just about anywhere. Terminates to 6-ft. non-metallic flex-
ible whip that can be field-cut to shorter lengths.
• Model No. ACSP-2002-HW: features (2) 20A outlets (1 duplex)
• Model No. ACSP-2002-VTE-HW: features (2) 20A outlets (1
duplex) and VTE over/under protection that automatically turns
receptacles off when line voltage drops below 100V or rises
above 140V.
• Model No. ACSP-2002-RPC-HW: features (2) 20A outlets and
remote power control capability by a low voltage sequencer,
switch or control system that provides a maintained dry contact
closure.
• Model No. ACSP-2002-IG-HW: features (2) 20A insulated
ground outlets (1 duplex).
• Model No. ACSP-2002-IG-VTE-HW: features (2) 20A insulated
ground outlets (1 duplex) and VTE over/under protection that
automatically turns receptacles off when line voltage drops
below 100V or rises above 140V.
• Model No. ACSP-2002-IG-RPC-HW: features (2) 20A insulated
ground outlets and remote power control capability by a low
voltage sequencer, switch or control system that provides a
maintained dry contact closure.
• Model No. ACSP-2002-GTF-HW: features (2) 20A insulated
ground outlets (1 duplex) plus a ground transient filter. The
patented GTF technology filters potentially damaging electro-
magnetic transients/noise on the ground wire. The GTF installs
in series with the ground line of electrical circuits to attenuate
high frequency transients without impeding 60Hz fault current.
t introduces less than 0.1 ohm at 60Hz to the ground circuit
thereby assuring proper operation of any and all overcurrent
protection devices (circuit breakers, fuses, etc.). The GTF pro-
vides significant attenuation at higher frequencies where the
most damaging transients exist. At 1MHz, for example, the GTF
attentuates ground noise by 25dB which can be the difference
between a sensitive system functioning continuously or having
an interruption or “reset” occurence.
*US P tent No. D535178S
All versions of the 20A hardwired
COMPAC include 6-ft. non-metallic
flexible whip and mounting brackets.
ACSP-2002-HW
Features
• ETL Listed, ANS C62.41 Compliant, conforms to UL1449-3
• Low-profile chassis (1.75”H x 6”D x 9”W)
• Rotating outlet plate that rotates 90º for front or side access.
• LEDs provide visual system status
• Suppresses line to neutral with no ground contamination.
• TCR®technology defeats surges up to 72,000 amps with zero
failures
• Two mounting brackets allow versatile installation. (Optional
mounting ears are available if standard 19” rackmount instal-
lation is preferred.)
• Terminates to 6-ft. non-metallic flexible whip
• 10 year warranty
A & E Specifications
The 20A single-circuit surge suppressor shall be Lowell Model ___
with one duplex outlet. t shall be ETL Listed and conform to UL1449-
3. t shall meet ANS C62.41 and protect line to neutral without ground
wire contamination. t shall be capable of protecting electronic equip-
ment from transient voltages, spikes and surges up to 72,000 amps
and have a response time of less than 5 nanoseconds. t shall surface
or rear rackmount using mounting brackets and include outlets
mounted on a plate that can be rotated 90º for front or side access. t
shall include LEDs for visual ground verification and surge diagnos-
tics. [Model _____ shall include insulated ground outlets. Model ____
shall include automatic over/under voltage shutdown protection when
voltage drops below 100V or rises above 140V. Model _____ shall
include remote power control capability (by a low voltage sequencer,
switch or control system that provides a maintained dry contact clo-
sure). Model _____ shall include a ground transient filter.]
Optional mounting
ears (ACC-1ME) are
available if standard
19” rackmount instal-
lation is preferred.
