Lowrance Simrad LiveSight User manual

LiveSight Ice transducer
Installation Guide
Parts included
*988-12345-001*
Dimensions
Compliance statements
Technical specications
Environmental
Water temperature 0°C to +35°C
(+32°F to +95°F)
Storage temperature -30°C to +70°C
(-22°F to +158°F)
Physical
Weight (without cable) 0,614 kg (1.354 lbs.)
Cable length 7,6 m (25 ft)
United States of America
¼Note: The user is cautioned that any changes or modications not
expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment
Europe
Navico declares under our sole responsibility that the product conforms
with the requirements of:
• CE under EMC Directive 2014/30/EU
The relevant Declaration of Conformity is available on the following
websites:
– www.lowrance.com
– www.simrad-yachting.com
Australia and New Zealand
Navico declares under our sole responsibility that the product conforms
with the requirements of:
• level 2 devices of the Radiocommunications (Electromagnetic
Compatibility) standard 2017
The relevant Declaration of Conformity is available on the following
websites:
– www.lowrance.com
– www.simrad-yachting.com
A. LiveSight transducer, incl. 7,6 m (25 ft) cable
B. Transducer bracket
C. Screws M4x8 Ph SS18-8 and washers (x4)
D. Pole adapter
E. Hex ange bolts M6-1x12, SS18-8, and M6x1 serrated
ange nut, 316SS (x2)
F. Screw M4x8 Ph SS18-8 and M4 316SS nylock nut
G. Cable ties (for transducer cable) (x3)
H. Ice pole (upper, middle and lower)
I. Clamp hose 20 SS (for ice pole adapter) (x2)
J. Base plate, ice pole mount
A B C
EF
D
J
I
H
G
90 mm
(3.5 “)
50 mm (2.0 “)
134 mm
(5.3 “) 1.6 m
(5.22’)
1.2 m
(3.94’)

Assemble transducer and bracket
Assemble all parts
3
4
12
6
5
A
Tilt the transducer until the
holes (A) on the transducer
bracket and on the pole
adapter align Install the
screw and
nylock nut
to x the
transducer
angle
Loosely x the ange
nuts and ange bolts
to assemble the
transducer bracket and
the pole adapter
1
2
4
3
Torque to 7 Nm
(~15 lbf in).