Loxit 8423 User manual

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
Mono Fixed Height - Trolley 8423
- Max load 130kg - Screens upto 86”
Safety instructions
Use the following safety guidelines to help protect your trolley from potential damage and to
ensure your own personal safety.
When adding a TV or any other equipment the party adding this TV or equipment is
responsible for ensuring stability and safe operation of the trolley.
The trolley must only be used on a flat floor area
The trolley must not be moved over rough or uneven ground.
The trolley must only be used indoors in a dry area.
2. Bolt the base to the column using
foureM10x25mm bolts with pre-applied
thread lock and tighten using the T bar.
1. Secure the casters in place as shown using
the M10x25mm bolts with pre-applied
thread lock.

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
3. Remove the grommets from the front of
the column. Then secure the mount in
place using four M8*20mm bolts, the
mount can be bolted in 5 different
positions and offers 400mm of height
adjustment in 100mm increments.
4. Fix the brackets to the back of the
screen using fixings of an appropriate
size and length for your screen. Ensure
the brackets are as central as possible.
5. Make sure the casters of the base are
locked, then hook the screen onto the
mount rail.

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
7. Unscrew the four M4 bolts and remove the
rear cover. Pass any power cables for the
screen through the grommet on the front of
the column and plug them into the 4 way
power strip. Once cabling is complete bolt
the cover back in place.
6. Secure the screen in place by fixing through the brackets into the mount plate, use the
M5x50mm Bolts and washers provided.