Loxit Hi Lo Duo 8940 User manual

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
Hi Lo Duo –Wall Mounted 8940
-Maximum Weight Capacity 85kg -Maximum Screen Size 75in
WARNING
Safety instructions
Do not attempt to install or use this product until all the instructions and warnings have been read and
understood. Please retain these instructions for future reference.
Failure to follow these instructions may result in accident leading to serious injury or death.
Failure to follow these instructions may result in the product being damaged or destroyed and the
warranty voided.
Loxit Products Ltd is not responsible for injury or damage caused by improper installation, improper
usage or failure to follow these instructions.
•Never exceed the maximum weight and/or screen size indicated. The use of equipment
exceeding the maximum weight and/or screen size may cause instability and/or product failure.
•Ensure the areas above and below any moving parts of the product are kept clear of
obstructions at all times.
•It is the responsibility of the installer to ensure that the wall and the fixings used are capable of
safely bearing the load of the product and any equipment installed on it.
•The product must only be used on a floor which is hard, flat and level.
•The base of the product must be in full contact with the floor to prevent stability issues.
•The floor surface the product is installed upon must be capable of safely bearing the weight of
the product and any equipment installed on the product.
•Hitting, pushing/pulling or climbing on the product may result in damage and/or failure of the
product and may cause the weakening and/or failure of the fixings used to secure the product to
the wall and/or floor.
•Children must not be allowed to operate the product or have access to the controls.
•To prevent bodily injury, keep hands and clothing away from moving parts when the product is
in operation.
•Before installing the product or working with its connections, unplug the product from the
mains power supply socket.
•The product must only be used indoors in a dry area and it must ensured before use that the
product is safe or protected from liquid contact or spillage.
•Unplug the product IMMEDIATELY in the following conditions:
-When the power cord or plug is damaged or frayed.
-If liquid has spilled into the product.
-If the product has been exposed to rain or water.
-If the product exhibits a distinct change in performance, indicating a need for
servicing.
•Do not place the product in places subject to extreme temperatures, for example near a radiator
or heating vents.

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
1. Fix the wall mount plates to the wall in the positions shown below.
Ensure the brackets are mounted level and in-line with each other.
3. Bolt the standoff brackets to the wall mount plates (40 and 100mm sizes are available),
using two M8*20mm bolts per standoff bracket.
2. Once all the wall fixings are in place, Bolt the vanity
panels in place using two M4 bolts per vanity panel.
8940
8940 / 8941
8941
695 –700 Min - Max

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
5. Fix the screen mount rail to the front of the plate using four bolts.
4. Move the lift assembly up against the wall mount
brackets and secure in place using the U-Shaped
brackets with two M8*20mm bolts per bracket. The
U-Shaped brackets should sit approx. 10mm from
the top of the stationary part of the lift column.
6. Bolt the brackets to the back of the screen, using bolts of the appropriate size
and length for your screen.

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected]m ꞁ [phone]
7. Hook the screen brackets onto the screen mount rail.
8. Secure the screen in place using the two security clips and two M6*50mm bolts
with washers.
9. To operate the Duo wall lift, plug the IEC mains lead into the bottom of the headbox.
Check that the area around the screen and lift is clear of obstructions, then use the
wired control to raise and lower the screen as required.