Loxit Hi Lo Mono 500 User manual

Hi Lo Mono 500/600- Trolley 8420 and 8421
-Li capacity 130kg -Screens upto 86”
Safety instrucons
Use the following safety guidelines to help protect your li from potenal damage and to
ensure your own personal safety.
· Read all the installaon instrucons before tesng or install ing your li.
· Read and follow all safety instrucons.
· Keep the oponal remote control out of reach of children.
· To prevent bodily injury, keep hands and clothing away from the li while the li is in
operaon.
· Before installing the li or working with its connecons, unplug the li from the mains
power supply socket
· Do not place the li in places subject to extreme temperatures for example near a
radiator, or heang vent.
· The Electric li must only be mounted in a dry area and it must ensured before use that
the li is safe or protected from liquid contact or spillage.
· Unplug the li IMMEDIATELY in the following condions:
-When the power cord or plug is damaged or frayed.
-If liquid has spilled into the li.
-If the li has been exposed to rain or water.
-If the li exhibits a disnct change in performance, indicang a need for
servicing.
· MANUFACTURERS who build this Li into other products or use it with other products,
MUST make sure to prevent bodily injury. The MANUFACTURER is responsible to give
the end user proper warnings and instrucons for use.
· When adding a TV or any other equipment the party adding this TV or equipment is
responsible for stability and security.
· The li should only be used on a flat floor area
WARNING ! THIS IS NOT A TOY !
WARNING ! CHILDREN SHOULD NOT OPERATE LIFT OR HAVE ACCESS TO THE
OPTIONAL REMOTE CONTROL !
WARNING ! THE LIFT MUST BE IN THE LOWEST POSITION WHEN MOVING IT
AROUND!
Go Educaon Ltd. Educaon House, 1 Liberty Centre, Mount Pleasant, Wembley, Middlesex, HA0 1TX
www.goeducaon.co.uk | sales@goeducaon.co.uk | [phone]

1. Secure the casters in place as shown using
M10*30mm bolts and a nylock nut.
2. Lower the cover onto
the H-base.
3. Bolt the li column and head box to the
base using four M10*20 bolts and nyloc
nuts. Cover the nuts with the caps.
Go Educaon Ltd. Educaon House, 1 Liberty Centre, Mount Pleasant, Wembley, Middlesex, HA0 1TX
www.goeducaon.co.uk | sales@goeducaon.co.uk | [phone]

4. Secure the mount to the headbox
using four M8 bolts.
5. Aach the brackets to the back of the
screen, make sure the brackets are as
central as possible.
6. Make sure the casters of the base are
locked, then hook the screen onto the
mount rail.
7. Secure the screen in place using the clips and two
M6*50mm bolts.
Go Educaon Ltd. Educaon House, 1 Liberty Centre, Mount Pleasant, Wembley, Middlesex, HA0 1TX
www.goeducaon.co.uk | sales@goeducaon.co.uk | [phone]