LP&No.1 LPSC-010 User manual

Model: LPSC-010
VINTAGE TURNTABLE

User Manual
Splendid real time
BEFORE USE
1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.
2. Avoid locations subject to vibrations, excessive dust, cold or moisture.
3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted
accidentally contact your dealer.
4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean,
dry cloth is recommended for cleaning.
5. Keep this manual for future reference.
Briefcase Turntable Parts & Features
1. 45 RPM adapter holder – Holds the included 45 RPM adapter. When not using the
adapter, please place it in this holder.
2. Tone arm – The turntable comes with a ready to use pre-balanced tone arm and

cartridge. The tone arm can be raised and lowered by hand, or by using the lift lever.
Please note that the tone arm needs to be moved away from resting position (on the
arm clip) for the turntable motor to activate if auto stop is activated
3. Lift lever
4. 33 / 45/78 RPM switch – This switch controls the RPM of the turntable platter.
5. AUTO STOP ON/OFF switch
6. Ceramic cartridge
7. Platter – Place your record here. Please use the 45 RPM adapter, if the spindle is the
incorrect size.
8. Spindle
9. Power on/off and volume control knob
10. Headphone jack
11. Port to connect power adaptor
12. RCA output – Use to connect to external speakers (not included)
13. 3.5mm line in port –it is for connecting your iPod, MP3 or other Digital Audio Players.
14. Function mode switch
Listening to a record
1. Lift the buckle on the front of the turntable and open the lid.
2. Turn the power & volume control knob clockwise.
3. Switch the function mode to PH mode and the indicator will become red color.
4. Place a record on the turntable platter and select the desired speed (33/45/78) according
to the record. NOTE: when playing a 45 rpm record, use the included 45 rpm adapter
located in the holder near the tone arm.
5. Open the tone arm clip to release the tone arm. Push the lift lever backward to raise the
tone arm and gently move the tone arm to the desired position over the record. The
turntable will begin to spin when the arm is moved toward the record. Push the lift lever
forward lower the tone arm slowly onto the desired position on the record to begin playing
the record. Please note: The record will begin to spin only when the tone arm is moved
over to the record if the Auto Stop is turned on.
AUTO STOP feature applies to most 33RPM vinyl records.
If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when
finished(For some few vinyl records, it will stop when it does not come to the end or it will not
stop when it comes to the end). If Auto Stop Control is turned OFF, record will NOT stop
automatically when finished.
Remark: During the phono mode, please make sure that the LINE IN jack was not plugged
in with the audio cable.
BLUETOOTH PLAYBACK
1. Switch the function mode to BT mode and the indicator will become blue color flashing.
2. Search the unit on your mobile phone or tablet PC, and you will find the device name

LPSC-010. After pairing and connection, the BT indicator will become blue without flashing, you
can enjoy the Bluetooth playback.
Turn the VOLUME CONTROL KNOB to adjust the volume. (The mobile phone or tablet PC’s
volume control may also impact on Volume Level so ensure this is also turned up).
Remark: During the Bluetooth mode, please make sure that the LINE IN jack was not
plugged in with the audio cable.
During pairing, if your mobile phone requests pairing password, please input 0000 and
then continue pairing and connection.
LINE IN function
1. Stop the vinyl playing.
2. Connect your iPod, MP3 player, mobile phones etc. to the LINE IN port with a
3.5mm-3.5mm audio cable(not included).
3. You can enjoy the music of iPod, MP3 player, mobile phones etc. at the turntable player.
4. Turn the VOLUME CONTROL KNOB to adjust the volume. (The mobile phone or tablet
PC’s volume control may also impact on Volume Level so ensure this is also turned up).
MUSIC playback on your own speaker system
1. Connect your own speaker system to the RCA port with a RCA-3.5mm audio cable (not
included).
2. You can enjoy the music of the vinyl records at your own speaker system.
MUSIC playback on your headphone
1. Connect your headphone to the headphone port.
2. You can enjoy the music of the vinyl records via your headphone.
How to Replace the Turntable Stylus (Needle)
Removing the Stylus from the Cartridge
1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”.
2. Remove the stylus by pulling the stylus forward and pushing downward.

Installing the Stylus
1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”.
2. Push the stylus upward as in direction "C" until the stylus locks into the tip position.
TIPS TO BETTER TURNTABLE PERFORMANCE
1. When opening or closing the turntable cover, handle it gently, gripping it either at the
centre or at each side.
2. Do not touch the needle tip with your ngers; avoid bumping the needle against the
turntable platter or record edge.
3. Frequently clean the needle tip-use a soft brush in a “back-to-front’motion only.
4. If you must use a needle cleaning uid, use very sparingly.
5. Gently wipe the dust cover and turntable housing with a soft cloth. Use only a small
amount of mild detergent to clean the turntable and dust cover.
6. Never apply harsh chemicals or solvents to any part of the turntable system.