LST WMSTR-WR-P01 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
WMSTR-WR-P0x_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Strobe
WMSTR-WR-P01, WMSTR-WR-P02
Description
• ADM loop technology with
System Sensor/200 protocol
• Long lifetime of strobe due to the use
of LEDs
• Low power consumption
• Versions with or without integrated
dual-isolator available
• Various base types available –
IP24, IP44, IP65
Specifi cations
Operating voltage Supply through loop voltage
Flash frequency 1Hz
Ambient temperature -25°C to +70°C
Dimensions ø × H 112 × 37 (mm) (incl. base LPBW)
Weight 80g
Colour red
The loop powered strobe is fi tted into a round, red plas-
tic case. It is powered and actuated as a module via the
ADM loop with System Sensor/200 protocol.
The address of the strobe is selected with two decadic
rotary switches located at the bottom of the device.
The strobe is designed for indoor or outdoor wall moun-
ting. For this purpose a special base is needed. Various
base types for protection classes IP24, IP44 or IP65
are available, depending on the application. An optional
mounting plate can be supplied for surface mounted
cabling.
The strobe is available in two different versions: With or
without integrated dual-isolator module.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
WMSTR-WR-P0x_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Loop strobe without isolator
Current consumption from loop max. 450µA (strobe off)
max. 3.8mA (strobe active)
Order number 356140
Order name Strobe/WM/200/Red WMSTR-WR-P01
Loop strobe with isolator
Current consumption from loop max. 450µA (strobe off)
max. 4.0mA (strobe active)
Order number 356141
Order name Strobe/WM/200ISM/Red WMSTR-WR-P02
Base IP24
Order number 359040
Order name Base Sounder & Strobe/IP24/White LPBW
Base IP44
Order number 359041
Order name Base Sounder & Strobe/IP44/Red SDBR
Base IP65 (not illustrated)
Order number 359042
Order name Base Sounder & Strobe/IP65/Red WDBR
Mounting plate for surface mounted cabling with base LPBW, 5 Pieces
Order number 359049
Order name Mounting Plate for Sounder/200/5 pcs. DBSPD/5
Base and accessories
For wall mounting of the strobe, various base
types with protection classes IP24, IP44 or IP65
are available.
For surface mounted cabling with base LPBW,
an optional mounting plate can be supplied.
Specifi cations