LST ECO1003 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
ECO1003_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Optical Smoke Detector
ECO1003
Description
The Optical Smoke Detector ECO1003 uses the scatte-
red light principle and was developed for the detection
of smoke particles in a wide range of fi re detection ap-
plications. The modern design of the sensing chamber
allows to reliably evaluate the characteristics of fi re.
Addressable conventional technology is used for alarm
transmission to the fi re detection control panel. By
means of the Address Module NG58-1, each detector
can be addressed individually.
A test activation of the detector can be carried out
using the Remote Test Unit ECO1000RTU. The detec-
tor can be attached to various bases and it can be
protected against theft.
• Addressable conventional technology
• Individual detector addressing by
means of optional address module
• Optional connection of remote
indicator
• Extremely fl at design
• Function testable with Remote Test
Unit ECO1000RTU
Specifi cations
Operating voltage Supply through the detector line voltage
Current consumption typ. 65µA (quiescent)
Ambient temperature -30°C to +70°C
Relative humidity 5 – 95% (no condensation)
Dimensions ø × H 102 × 32.5 (mm)
Colour white
Weight 75g
Approval VdS G201060
Order number 241045
Order name Optical Smoke Detector/Conv./1000/SS ECO1003