Lucent Technologies Stinger STGR-LIM-48 User manual

Stinger®
SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
For software version 9.3-170
June 2002

Lucent Technologies
Copyright © 2002 Lucent Technologies Inc. All rights reserved.
This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in
any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or
licensing, without the express written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to
[e-mail].
Notice
Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is
subject to change.
European Community (EC) RTTE compliance
Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential require-
ments and other relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE) Directive 1999/5/EC.
To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation
library at http://www.lucentdocs.com/ins.
Safety, compliance, and warranty information
Before handling any Lucent Access Networks hardware product, read the Edge Access and Broadband Access Safety and Compliance Guide included
in your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and network
compatibility requirements of your country. See the warranty card included in your product package for the limited warranty that Lucent
Technologies provides for its products.
Security statement
In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.
Trademarks
Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other
brand and product names are trademarks of their respective holders.
Ordering information
You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.
Feedback
Lucent Technologies appreciates customer comments about this manual. Please send them to [email protected].

Customer Service
Stinger® SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide iii
Customer Service
Product and service information, and software upgrades, are available 24 hours a day.
Technical assistance options accommodate varying levels of urgency.
Finding information and software
To obtain software upgrades, release notes, and addenda for this product, log in to
Lucent OnLine Customer Support at http://www.lucent.com/support.
Lucent OnLine Customer Support also provides technical information, product
information, and descriptions of available services. The center is open 24 hours a day,
seven days a week. Log in and select a service.
Obtaining technical assistance
Lucent OnLine Customer Support at http://www.lucent.com/support provides easy
access to technical support. You can obtain technical assistance through email or the
Internet, or by telephone. If you need assistance, make sure that you have the
following information available:
■Active service or maintenance contract number, entitlement ID, or site ID
■Product name, model, and serial number
■Software version or release number
■Software and hardware options
■If supplied by your carrier, service profile identifiers (SPIDs) associated with your
line
■Your local telephone company’s switch type and operating mode, such as AT&T
5ESS Custom or Northern Telecom National ISDN-1
■Whether you are routing or bridging with your Lucent product
■Type of computer you are using
■Description of the problem
Obtaining assistance through email or the Internet
If your services agreement allows, you can communicate directly with a technical
engineer through Email Technical Support or Live Chat. Select one of these sites
when you log in to http://www.lucent.com/support.
Calling the technical assistance center (TAC)
If you cannot find an answer through the tools and information of Lucent OnLine
Customer Support or if you have a very urgent need, contact TAC. Access Lucent
OnLine Customer Support at http://www.lucent.com/support and click Contact Us
for a list of telephone numbers inside and outside the United States.
Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North
America for a menu of Lucent services. Or call [phone] for an operator. If
you do not have an active services agreement or contract, you will be charged for
time and materials.

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide v
Contents
Customer Service ........................................................................................................iii
About This Guide ................................................................................xi
What is in this guide ...................................................................................................xi
What you should know...............................................................................................xi
Documentation conventions.......................................................................................xi
Stinger documentation set .........................................................................................xii
Chapter 1 Configuring the SHDSL LIM..............................................................1-1
Introducing the SHDSL LIMs ................................................................................... 1-1
Installing the single-pair high-speed DSL (SHDSL) LIM ......................................... 1-2
Module specifications...............................................................................................1-2
Status indicators....................................................................................................... 1-3
Interpreting SHDSL LIM status lights................................................................1-4
Embedded Operations Channel (EOC) protocol compliance ............................1-5
Configuring SHDSL interfaces..................................................................................1-5
Configuring port settings for SHDSL..................................................................1-5
Sample SHDSL mode configuration ................................................................1-12
Binding two SHDSL ports................................................................................1-13
Displaying SHDSL port status .......................................................................... 1-13
Configuring call control..........................................................................................1-14
Checking the status of an SHDSL interface............................................................ 1-16
Checking the status of the physical interface .................................................. 1-17
Obtaining statistics about operations............................................................... 1-18
Diagnostic internal, external, and bit error-rate tests ............................................ 1-20
Configuring an internal diagnostic test (IDT)..................................................1-22
Configuring a bit-error-rate test (BERT).......................................................... 1-22
Configuring an external diagnostic test (EDT) ................................................ 1-23
Digital loopback......................................................................................... 1-23
Analog loopback........................................................................................ 1-24
Chapter 2 Configuring LIM and LIM Port Redundancy....................................2-1
Overview of LIM and LIM port redundancy............................................................2-1
Configuring LIM redundancy................................................................................... 2-1
Overview of the lim-sparing-config profile .......................................................2-2
Manual LIM redundancy...................................................................................2-4
Automatic LIM redundancy ..............................................................................2-4
LIM redundancy with IRMs and LPM-Rs..........................................................2-6
Checking LIM redundancy status...................................................................... 2-8

vi Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
Contents
Checking status with the Rearslot command .................................................... 2-9
Configuring LIM port redundancy..................................................................... 2-9
Enabling LIM port redundancy........................................................................2-11
Manual LIM port redundancy ......................................................................... 2-11
Automatic LIM port redundancy.....................................................................2-12
Checking the status of extended LIM port redundancy .................................. 2-12

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide vii
Figures
Figure 1-3 SHDSL 72-port LIM .............................................................................. 1-4
Figure 1-5 Digital loopback .................................................................................. 1-23
Figure 1-6 Analog loopback ................................................................................. 1-24
Figure 2-1 LIM redundancy in a Stinger FS unit ................................................... 2-2
Figure 2-2 LIM port redundancy on a Stinger FS unit......................................... 2-10

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide ix
Tables
Table 1-1 SHDSL LIMS........................................................................................ 1-1
Table 1-2 Specifications for the SHDSL 48-port and 72-port LIMs..................... 1-2
Table 1-4 SHDSL LIM status lights...................................................................... 1-4

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide xi
About This Guide
What is in this guide
This guide describes how to configure and monitor the Stinger SHDSL line interface
module (LIM) and includes configuration examples and module specifications. This
guide also describes how to configure LIM redundancy.
Warning Before installing your Stinger unit, be sure to read the safety instructions
in the Edge Access and Broadband Access Safety and Compliance Guide. For information
specific to your unit, see the “Safety-Related Physical, Environmental, and Electrical
Information”appendix in the Getting Started Guide for your Stinger unit.
What you should know
To make use of the procedures and sample configurations in this guide, you should
have a general knowledge of Stinger products and a working knowledge of the
command-line interface. You should understand the fundamental concepts of digital
subscriber line (DSL) technology and be familiar with the relationship between DSL
interfaces and associated configuration profiles.
Documentation conventions
Following are the special characters and typographical conventions used in this
manual:
Convention Meaning
Monospace text Represents text that appears on your computer’s screen, or that
could appear on your computer’s screen.
Boldface mono-
space text Represents characters that you enter exactly as shown (unless the characters are also in italics—see Italics, below). If you
could enter the characters but are not specifically instructed to,
they do not appear in boldface.
Italics Represent variable information. Do not enter the words them-
selves in the command. Enter the information they represent.
In ordinary text, italics are used for titles of publications, for
some terms that would otherwise be in quotation marks, and to
show emphasis.

xii Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
About This Guide
Stinger documentation set
Stinger documentation set
The Stinger documentation set consists of the following manuals, which can be found
at http://www.lucentdocs.com/ins:
■ Read me first:
–Edge Access and Broadband Access Safety and Compliance Guide. Contains
important safety instructions and country-specific information that you must
read before installing a Stinger unit.
–TAOS Command-Line Interface Guide. Introduces the TAOS command-line
environment and shows you how to use the command-line interface
effectively. This guide describes keyboard shortcuts and introduces
commands, security levels, profile structure, and parameter types.
[ ] Square brackets indicate an optional argument you might add
to a command. To include such an argument, type only the
information inside the brackets. Do not type the brackets unless
they appear in boldface.
| Separates command choices that are mutually exclusive.
> Points to the next level in the path to a parameter or menu
item. The item that follows the angle bracket is one of the
options that appear when you select the item that precedes the
angle bracket.
Key1-Key2 Represents a combination keystroke. To enter a combination
keystroke, press the first key and hold it down while you press
one or more other keys. Release all the keys at the same time.
(For example, Ctrl-H means hold down the Control key and
press the H key.)
Press Enter Means press the Enter, or Return, key or its equivalent on your
computer.
Note
Introduces important additional information.
Caution Warns that a failure to follow the recommended procedure
could result in loss of data or damage to equipment.
Warning Warns that a failure to take appropriate safety precautions
could result in physical injury.
Warning
Warns of danger of electric shock.
Convention Meaning

About This Guide
Stinger documentation set
Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide xiii
■ Installation and basic configuration:
–Getting Started Guide for your unit. Shows how to install your Stinger chassis
and hardware. This guide also shows you how to use the command-line
interface to configure and verify IP access and basic access security on the
unit, and how to configure Stinger control module redundancy.
–Module guides. For each Stinger line interface module (LIM), trunk module,
or other type of module, an individual guide describes the module's features
and provides instructions for configuring the module and verifying its status.
■ Configuration:
–Stinger ATM Configuration Guide. Describes how to use the command-line
interface to configure Asynchronous Transfer Mode (ATM) operations on a
Stinger unit. The guide explains how to configure permanent virtual circuits
(PVCs), and shows how to use standard ATM features such as quality of
service (QoS), connection admission control (CAC), and subtending.
–Stinger Private Network-to-Network Interface (PNNI) Supplement. Provides
quick-start instructions for configuring PNNI and soft PVCs (SPVCs), and
describes the related profiles and commands in the Stinger command-line
interface.
–Stinger SNMP Management of the ATM Stack Supplement. Describes SNMP
management of ATM ports, interfaces, and connections on a Stinger unit to
provide guidelines for configuring and managing ATM circuits through any
SNMP management utility.
–Stinger T1000 Module Routing and Tunneling Supplement. Describes how to
configure the Layer 3 routing and virtual private network (VPN) capabilities
supported by a Stinger T1000 module.
–TAOS RADIUS Guide and Reference. Describes how to set up a TAOS unit to use
the Remote Authentication Dial-In User Service (RADIUS) server and
contains a complete reference to RADIUS attributes.
■ Administration and troubleshooting:
–Stinger Administration Guide. Describes how to administer the Stinger unit and
manage its operations. Each chapter focuses on a particular aspect of Stinger
administration and operations. The chapters describe tools for system
management, network management, and Simple Network Management
Protocol (SNMP) management.
■ Reference:
–Stinger Reference. An alphabetic reference to Stinger profiles, parameters, and
commands.
–TAOS Glossary. Defines terms used in documentation for Stinger units.

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide 1-1
1
Configuring the SHDSL LIM
The Stinger SHDSL 48-port and 72-port line interface modules (LIMs) support
single-pair high-speed digital subscriber line (SHDSL) mode. In addition, four wire
support combines the bandwidth of two ports to double the available bandwidth.
When an SHDSL LIM is installed in a Stinger slot, the Stinger chassis connects the
LIM to a line protection module (LPM), which provides the physical connections for
incoming lines. The 48-port SHDSL LIM provides 48 SHDSL interfaces per LIM. The
72-port SHDSL LIM provides 72 SHDSL interfaces per LIM.
Introducing the SHDSL LIMs
Stinger units support SHDSL LIMs with 48 and 72 ports, each of which is available in
two versions. Table 1-1 list the SHDSL LIM models and the supported platforms.
Introducing the SHDSL LIMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installing the single-pair high-speed DSL (SHDSL) LIM . . . . . . . . . . . . . . . . . . . 1-2
Module specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Status indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Configuring SHDSL interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Configuring call control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Checking the status of an SHDSL interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Diagnostic internal, external, and bit error-rate tests . . . . . . . . . . . . . . . . . . . . 1-20
Table 1-1. SHDSL LIMS (page 1 of 2)
Platform Product code Description
Stinger FS
Stinger FS+
Stinger RT
STGR-LIM-48 48-port SHDSL LIM
Stinger FS
Stinger FS+
Stinger RT
STGR-LIM-72 72-port SHDSL LIM

1-2 Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
Configuring the SHDSL LIM
Installing the single-pair high-speed DSL (SHDSL) LIM
A Stinger unit using an SHDSL LIM supports symmetric data transfer rates from
72Kbps through 2312Kbps. SHDSL technology is spectrally compatible with other
loop technologies such as ISDN, T1, and HDSL.
Installing the single-pair high-speed DSL (SHDSL) LIM
Install the SHDSL module in the same manner as you install other LIM modules. For
details, see the Stinger Getting Started Guide for your unit. After installation, follow the
instructions in this document to configure the module.
Module specifications
Table 1-2 shows the specifications for the SHDSL 48-port and 72-port LIMs.
Stinger RT STGRRT-LIM-SL-48 48-port SHDSL LIM
Stinger RT STGRRT-LIM-SL-72 72-port SHDSL LIM
Table 1-1. SHDSL LIMS (page 2 of 2)
Platform Product code Description
Table 1-2. Specifications for the SHDSL 48-port and 72-port LIMs (page 1 of 2)
Category Specification
Physical
dimensions Height: 15 inches (38.1cm).
Width: 1.06 inches (2.69cm).
Depth: 9 inches (22.8cm).
Weight 48-port model—3.8 pounds (1.7kg)
72-port model—4.7 pounds (2.1kg)
Maximum power
requirements 48-port model—80W
72-port model—119W
Add .48W for each line that has sealing current enabled.
Temperature FS/LS version: 32°F through 131°F (0°C through 55°C)
RT version: -40°F through 149°F (-40°C through 65°C)
Relative
Humidity 10% through 95% (noncondensing)
Operating
Altitude RT version: Up to 13,123 feet (4,000m)

Configuring the SHDSL LIM
Status indicators
Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide 1-3
Status indicators
Several status lights on the front panel of SHDSL LIMs indicate the status of the
modules and their ports. Status lights are the same for both models of the SHDSL
LIM. Figure 1-3 shows the front panel and status lights of the SHDSL 72-port LIM.
Interface
standards ITU G.991.2 (G.shdsl)
Annex A (North America)
Annex B (Europe)
ETSI TS 101 524 (similar to ITU Annex B implementation)
ITU G.994.1 (G.hs)
ITU G.997.1 (physical layer management)
Range Maximum 24,000 feet with 24 AWG wire at 192Kbps
Maximum 12,000 feet with 24 AWG wire at 2.312Mbps
Table 1-2. Specifications for the SHDSL 48-port and 72-port LIMs (page 2 of 2)

1-4 Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
Configuring the SHDSL LIM
Status indicators
Figure 1-3. SHDSL 72-port LIM
Interpreting SHDSL LIM status lights
All status lights illuminate briefly upon startup or restart, then remain dark until the
module passes its power-on self test (POST). When the module passes its POST and
becomes operational, the ACTIVE light illuminates. Table 1-4 explains SHDSL LIM
status lights.
Table 1-4. SHDSL LIM status lights (page 1 of 2)
Light Color Indication
STBY Orange The module is a designated spare. The control
module switches traffic to the module if one of
the other modules fails.

Configuring the SHDSL LIM
Configuring SHDSL interfaces
Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide 1-5
Embedded Operations Channel (EOC) protocol compliance
Embedded Operations Channel (EOC) protocol compliance is defined within the
G.991.2 standard specification. The EOC protocol provides identification and
statistical information about the SHDSL interface and its remote repeaters and
associated customer premises equipment (CPE) and central office equipment nodes.
To display basic statistics, view the shdsl-stat profile.
Configuring SHDSL interfaces
The SHDSL 48-port LIM supplies up to 48 interfaces per LIM. The SHDSL 72-port
LIM supplies up to 72 interfaces per LIM. Except for the number of interfaces,
configuration of the two SHDSL models is identical. A Stinger unit creates an shdsl
profile for each SHDSL interface in the system.
For example, for an SHDSL 72-port LIM installed in slot 1, the system creates profiles
such as the following:
admin> dir shdsl
18 06/20/1999 23:18:51 { shelf-1 slot-1 1 } 1:1:1
18 06/20/1999 23:18:51 { shelf-1 slot-1 2 } 1:1:2
18 06/20/1999 23:18:51 { shelf-1 slot-1 3 } 1:1:3
18 06/20/1999 23:18:51 { shelf-1 slot-1 4 } 1:1:4
18 06/20/1999 23:18:51 { shelf-1 slot-1 5 } 1:1:5
18 06/20/1999 23:18:51 { shelf-1 slot-1 6 } 1:1:6
18 06/20/1999 23:18:51 { shelf-1 slot-1 7 } 1:1:7
18 06/20/1999 23:18:51 { shelf-1 slot-1 8 } 1:1:8
Configuring port settings for SHDSL
SHDSL ports are configured in each port’s shdslprofile. The default shdsl profile is as
follows:
[in SHDSL/{ any-shelf any-slot 0 } (new)]
name = ""
ACTIVE Green The module or port is fully operational and no
errors have been detected.
FAULT Orange The module failed to pass its POST.
BYPASS Orange The module is in bypass mode. (The module
redundancy feature is activated.)
PORT Green The local and remote ends of the physical line
have achieved frame synchronization, and the
local end of the ATM link has achieved cell
delineation.
If the light is not illuminated, the port is inactive.
Table 1-4. SHDSL LIM status lights (page 2 of 2)
Light Color Indication

1-6 Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide
Configuring the SHDSL LIM
Configuring SHDSL interfaces
physical-address* = { any-shelf any-slot 0 }
enabled = no
sparing-mode = inactive
ignore-lineup = system-defined
line-config = { 0 1 15 static { any-shelf any-slot 0 } coe no not-eligible
midd+
The default line-config subprofile is listed below with its defaults:
[in SHDSL/{ any-shelf any-slot 0 }:line-config]
trunk-group = 0
nailed-group = 1
vp-switching-vpi = 15
activation = static
call-route-info = { any-shelf any-slot 0 }
unit-type = coe
ntr-enabled = no
clock-source = not-eligible
clock-priority = middle-priority
loop-back = none
margin = 2db
snext-margin = disable
rate-mode = auto
min-rate = 72000
max-rate = 2312000
gshdsl-standard-network-type = north-american-annex-a
annexb-anfp-enabled = no
gshdsl-psd-type = symmetric
master-binding-port = no
Parameter Setting
name Name of the interface. The default value is the interface
address in shelf:slot:item format (for example, 1:2:1),
but you can assign a text string of up to 16 characters.
physical-address Physical address of the interface in the Stinger unit.
enabled Enable or disable the interface. Specify one of the following
values:
■no (the default)—Line is disabled until you activate it in
the shdsl profile.
■yes—Line is enabled.
ignore-lineup Value of the ignore-lineup parameter. Possible values are:
■system-defined—Ignore line up value is picked from
system profile.
■no—Do not ignore line up.
■yes—Ignore line up