Ningbo Lucky Snow Mechanical Equipment Manufacturing and Trading Co., Ltd.
www.lucky-snow.com Email:sales01@lucky-snow.com Tel:0086-574-82830703
use.
18. Turn the power switch off after use and disconnect the power plug.
In case the machine is accidentally left on, it will be turned off automatically when the
machine has not been used for 90 minutes.
19. The safety cap will automatically release pressure from the boiler if it is too high.
20. Please ensure this Safety Manual remains with the product
5.
5.
5.
5. Additional
Additional
Additional
Additional Important
Important
Important
Important Information
Information
Information
Information
1.
.
.
.Always ensure that the materials or the surfaces to be cleaned are suitable for the
steam cleaner.
2.
.
.
.Follow the manufacturer
’
s instructions of the item to be cleaned to ensure it is suitable
for steam cleaning.
3.
.
.
.
If
there is no information available, always test on an inconspicuous area of material.
Do not use the Domestic Car Cleaner should any damage appear. Keep moving the
sponge brush during the wash process.
4.
.
.
.Always use the recommended accessories for the Domestic Car Cleaner.
5.
.
.
.Spray the steam on small area at a time, the dirt can just be removed more easily when
it
’
s dissolved.
6.
.
.
.In case of stubborn dirt, treat that surface directly with steam spray first.
6.
6.
6.
6. Area
Area
Area
Area of
of
of
of application
application
application
application
The Domestic Car Cleaner is suitable for cleaning all kind of cars inside and out, including
the engine under the bonnet.
It is also suitable for use around the home, such as in the kitchen and bathroom on wall tiles,
floor tiles, timber floors, all kinds of stains on carpet, glass windows, blinds, air conditioning
vents and bicycles and toys, with the use of the many different accessories and
attachments.
7
7
7
7.
.
.
.Operating
Operating
Operating
Operating the
the
the
the Domestic
Domestic
Domestic
Domestic Car
Car
Car
Car Cleaner
Cleaner
Cleaner
Cleaner
1. Place the Domestic Car Cleaner on a flat surface. Press and hold down to open the
safety cap (6) in anticlockwise direction and fill the tank with water, replacing the cap
and tightening in clockwise direction.
2. Insert the electrical plug into power supply socket. The red power indicator (8) will light
up.
3. Connect the hose joint (13) with steam outlet (12) correctly.
Fit the desired connection joint 19,20,23,28,32 ）onto the steam nozzle (18) by pressing
the spring button on the steam nozzle until it clicks for standard cleaning or use the
steam spray gun (15) directly onto the item for more stubborn dirt.
4. Turn the power switch button (7) on, the red heating indicator will be on and then the
machine starts heating up.
5. The machine will be ready for use when the green working indicator is on. The steam
will spray out immediately when you press the steam trigger button (16).
6. The power switch must be turned off after use.
7. Remove the electrical plug from the power socket.
8. Keep the brush pointing towards to the ground if you wish to remove the brush from the
steam nozzle.
Warning:
Warning:
Warning:
Warning:
1. NEVER open the safety cap when the LS-02 machine is in operation or before the
machine cools down unless no water remains in the unit.
2. To avoid scratching the paint work on your car, please check the sponge brush and
synthetic chamois before use for grit and dirt particles that can cause damage.
