Lumary SMART Wi-Fi Guide

Lumary
SMART Wi-Fi
DIMMER SWITCH
START GUIDE

Contents
4-2retsigeR&daolnwoD
7-5llatsnI
9-8tratseR&teseR
11-01)edoMysaE(tcennoC
31-21)edoMPA(tcennoC
71-41secitoN,gnitoohselbuorT,QAF
Thank you for purchasing your Lumary smart home product.
Ready to get started? Download the Lumary app to manage
your switches (and all other Lumary devices) straight from
your phone or tablet. Easily connect to your home Wi-Fi and
control multiple devices with the touch of your ngertips.

What’s in the Box
Get Ready
• Smart Wi-Fi Light Switch
• Face Plate
• 4x Wire Nut
• 2x Screws
• Start Guide
• Voice Control Guide
• Turn OFF power supply at the circuit breaker or fuse. Use a
noncontact voltage tester to ensure that power is o. More
than one disconnect switch may be needed to turn o power.
• Conrm that you are replacing a single pole (single switch),
one-way switch (not a 3-way switch where two switches
control one xture).
• Make sure the existing switch box has a neutral wire.
SMART Wi-Fi
LIGHT
SWITCH
START GUIDE
VOICE
CONTROL
GUIDE
WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Please follow all safety instructions on
page ve before installing, servicing, or removing your TAP.

2
1 Download the Lumary app

3
2 Register a Lumary account
STEP 1
Enter your mobile phone number
or email address.
STEP 2
Enter the verication code
and create a password.

4
STEP 3
Log into the app.
2 Register a Lumary account, cont.

5
3 Install
STEP 1
Shut o power at the circuit
breaker for the switch that you
are replacing. More than one
disconnection may be required to
turn o power. Use a noncontact
voltage tester to ensure that
power is o.
STEP 2
Make sure the existing switch box
has a neutral wire*. Remove old
switch by disconnecting all wires.
*Neutral wire is typically white.
ON
OFF
Disconnect all wires.

6
3 Install, cont’d
STEP 3
Connect Switch’s neutral
wire (white) to your
home’s neutral wire.
Connect Switch’s two
load (black) wires
(labeled as “SW” on the
back of Switch) to your
home’s load wires, then
connect the live wire.
Be mindful not to reverse
the live and load wires.
Connecting the Switch’s
ground wire (green) to
your home’s ground wire
is optional.
Check that all wire nuts
are secured.
Mark all wires with included
stickers for next reference
Neutral
(Required)
(Required)
Live Ground
(Optional,we suggest you
connect it if it’s present.)
(Required)
Load

Screw
Screw
Faceplate
7
3 Install (cont’d)
STEP 4
Use screws to secure TAP into your
wall. Snap on the included faceplate.
STEP 5
Restore power by reversing step 1.
STEP 6
Once power is connected, the
blue indicator light will blink to
indicate that TAP is ready to
connect to Wi-Fi.
Lumary
Indicator Light
Solid: Connected
Fast Blink: Easy Mode
Slow blink: AP Mode
On: Switched On
O: Switch O

Lumary
8
RESET RESTART
Power Reset
Press to reset the circuit if the
switch isn't working.
Wi-Fi Reset
Press and hold to put it in
Wi-Fi pairing mode.
See next page for
Wi-Fi Reset instructions.
4 Reset and restart
QUICK TIP: On the Switch Faceplate, the Reset button as the Power Reset
button and the Restart button is also known as the Wi-Fi Reset button.
Reset Restart

9
4 Reset and restart (cont’d)
How do I reset TAP and what does the blinking light mean?
Reset TAP by pressing and holding the Wi-Fi Reset (Restart ) button
for 3 seconds until the indicator begins to rapidly ash. The Wi-Fi Reset
button is located on the bottom right side of the switch (not the
switchplate) labeled “Restart”.
- Reset one time (press and hold) to reach Easy Mode
(Rapidly blinking blue, 2x per second)
- Reset again (press and hold) to reach AP Mode
(Slowly blinking blue, every 3 seconds)
Solid: Connected
Fast Blink: Easy Mode
Slow blink: AP Mode
On: Switched On
O: Switch O
Lumary

10
STEP 1
Open the Lumary app. In the top
corner of the Devices screen,
click (+).
Choose “Smart Power”.
STEP 2
Make sure TAP’s light is rapidly
ashing blue.
If not, reset to reach Easy Mode
to connect (Page 9).
Press “Next Step” in the app.
5 Connect: Easy Mode
Lumary

11
STEP 3
Enter your Wi-Fi network and
password.
NOTE: Lumary can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
STEP 4
The Lumary app will
connect to TAP.

12
6 Connect: AP Mode
STEP 1
Make sure TAP’s light is slowly ashing blue.
If not, reset to reach AP mode (page 9).
STEP 2
Open the Lumary app. In the top
corner of the Devices screen, click (+).
Choose “Smart Power“.
Choose “AP Mode” in the top corner.
STEP 3
Press “Next” and enter
your Wi-Fi details.

13
STEP 4
Follow the instructions to choose
the device from your Wi-Fi list.
STEP 5
The Lumary app will connect to TAP.
NOTE: Lumary can’t connect to 5GHz networks.
Lumary
Lumary

14
Frequently Asked Questions
1. Can I share with family and friends?
Yes, you can share access to TAP and any other Lumary device. In the Lumary app,
press the “Prole” button and click on “Device Sharing” to give or revoke sharing
permissions. In order to share, the other user should already have downloaded
the Lumary app and registered an account.
2. Can I group multiple Lumary devices together?
Yes, you can group multiple same-type devices by room, location, or however
else you want. The same devices can be in multiple groups. For example, if you
create a group for “Bedroom” and another group for “Entire House,” your
Bedroom lights can be included in both groups. From your main device list, click
on one of the devices you want to group, press the “ ” button on the top right
for advanced settings, and click “Create Group.” You’ll be able to name a new
group and choose which devices you’d like to group together.
3. How many devices can I control?
Lumary app can control an unlimited amount of devices in an unlimited amount
of locations. Your router may have a limit of how many devices can be connected
to one router.
4. My Lumary device has a funny name. How do I rename it?
From your main device list, click on one of the devices you want to rename, press
the “ ” button on the top right for advanced settings, and click “Modify Device
Name” (or “Modify Group Name”). You’ll then be able to choose a more familiar
name. To rename a particular outlet, click the small pencil icon next to its name.
5. What should I do if the device appears oine or is unreachable?
Make sure your Wi-Fi router is online and in range, and check that you have the
latest Lumary functionality by clicking “Check for rmware update” in your device
settings. If power is connected but TAP is not responding, hold down the Restart
button to cycle the fuse and give TAP a jump start.

6. What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specications for exact range data.
7. If my Wi-Fi/Internet goes down, will Lumary still work?
Lumary products need to be connected to Wi-Fi in order to use them remotely.
8. What do the green and blue lights mean?
The green light indicates power. If the green light is on, TAP is receiving power; if
it is o, TAP is not receiving power. The blue light indicates connection. If the blue
light is solid, TAP is connected; if the it is ashing quickly, TAP is ready to connect
using the Easy Mode (page 10); if it is ashing slowly, TAP is ready to connect using
the AP Mode (page 12).
15

16
Troubleshooting
Can’t connect to Wi-Fi?
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup.
Check whether there are any Internet connection problems. If the Wi-Fi signal is
too weak, reset your Wi-Fi router and try again.
Reset the device
To reconnect to Wi-Fi, hold down the Reset button for 3 seconds.
- Reset 1 time (press and hold) to reach Easy Mode, indicated by rapidly blinking
blue light. Refer to page 10 to connect in Easy Mode.
- Reset 2 times (press and hold) to reach AP Mode, indicated by slowly blinking
blue light. Refer to page 12 to connect in AP Mode.
System Requirements
• Existing neutral wire
• Existing single pole, one-way (not multi-location) light switch with box more
than 2 inches deep
• Phone with iOS 9® or later, or Android™ 4.1 or later
• Existing 2.4GHz Wi-Fi network (not compatible with 5GHz Wi-Fi networks)
• Lumary app
IMPORTANT: TAP requires a neutral wire and single pole. TAP is a one-way
switch, not a multi-location switch. Please consult a licensed electrician if you
cannot locate a neutral wire or are unfamiliar with electrical installations.
Technical Specications
• Rated Current: 3A
• Input: 100V-240V, 50/60HZ
• Wireless Frequency: 2.4GHz
• Max Output: 300W INC, 150W LED

17
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
Important Information:
Before installing, read and follow all precautions, including the following:
CAUTION: RISK OF ELECTRIC SHOCK OR FIRE
TAP must be installed and used in accordance with the National Electric Code. Please
consult a licensed electrician if you are uncomfortable or unfamiliar with electrical work.
Disconnect power before installing or modifying this product.
CAUTION: Suitable for indoor use only.
Support:
If you encounter any issues, please contact us at [email protected] for help.
To explore our full selection of products, visit us at: www.lumary.tech
Made in China