3
SPECIFIC SAFETY INSTRUCTIONS FOR THE MACHINE
1.Do not place your hands or any part of your body between the cutting head and the conveyor belt while the
machine is running. It is very dangerous.
2.Do not place fingers under bottom of workpiece while feeding it into sander. It can result in pinching injuries,
or possibly getting trapped and pulled into sanding area of machine.
3.Tie back long hair, remove jewelry, and do not wear loose clothing or gloves. These can easily get caught in
moving parts.
4.Check carefully whether the safety guards are intact before starting the machine.
5.Never reach inside machine or try to clear jammed workpiece while machine isoperating.
6.Do not sand any metal products. This sander isdesigned tosand only natural wood products or some products
made from natural wood fiber.
7.Inspect the workpiece before operating. Nails, staples, knots, or other imperfections in workpieces can be
dislodged and thrown from sander. This can cause personal injury and machine damage.
8.To reduce risk of kickback injuries, always stay out ofworkpiece path and do not sand anything too small.
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
WARNING: To avoid injury:
• Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
• Use only accessories designed for this machine to avoid injury from thrown broken parts or workpieces.
• Do not use any accessory unless you have completely read the instruction or operator’s manual for that
accessory.
PACKING BOX CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the machine and all its parts, and compare against the illustration following.
WARNING:
• To avoid injury from unexpected starting, do not plug the power cord into a power source during unpacking
and assembly. This cord must remain unplugged whenever you are assembling or adjusting the machine.
• If any part is missing or damaged, do not plug the machine in until the missing or damaged part isreplaced,
and assembly is complete.
