Lumens PS660 User manual

English - 0
PS660 Visual Presenter
Quick Start Guide

English - 1
1. Package Content
PS660 Quick Start Guide
(Multilingual) English User Manual
(For download of other
language versions, please visit
Lumens website)
Download Card Remote Control Extender Adapter


VGA Cable USB Cable C-Video Cable
Power Cord Microscope Adapter Audio cable
Appearance may vary with
country/region
Backlight (Optional) Padded Carry Bag
(Optional)

English - 2
2. System Diagram
PC Projector of monitor LCD TV Television
PC
Monitor
Speaker (or an amplifier
before connecting to the
speaker)
PC PC

English - 3
3. Connecting Devices
3.1 Step 1: Plugging in the Power Outlet
<Note>: Appearance of power cord may vary with countries/regions
3.2 Step 2:Connecting with components
3.2.1 Connecting to a projector
zUse VGA cable to connect VGA OUT connector on PS660 to a projector
or the VGA IN connector on a monitor.
3.2.2 Connecting to a monitor
zUse VGA cable to connect VGA PASSTHROUGH connector on PS660 to
the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH connector only outputs VGA IN
signals
AC Outlet

English - 4
3.2.3 Connecting to a TV
1.Use EXTENDER adapter and C-Video cable to connect EXTENDER on
PS660 to TV
2.Adjust DIP Switch Setting
For USA, Taiwan, Panama. Philippines, Canada, Chile, Japan, Korea and
Mexico, please use NTSC:
For other countries or regions, please use PAL:
<Note>: It doesn’t support C-Video and VGA simultaneously. Once
C-Video is on, VGA OUT is not supported.
3.After PS660 is re-started, new DIP switch configuration is effective

English - 5
3.2.4 Connecting to a LCD TV / PDP
zUsing the HDMI cable to connect a LCD TV/PDP
3.2.5 Connecting to a computer
zUse VGA cable to connect VGAIN (1) or VGA IN (2) on PS660 to VGA
OUT of the computer.
zUsing the USB Cable
After plugging in the USB cable, please refer to PS660 User Manual to
install the application software
zUsing the EXTENDER adapter and RS232 Cable to connect EXTENDER
of PS660 to a RS232 of computer

English - 6
3.2.6 Connecting to AUDIO IN
Use audio cable with two plugs to connect AUDIO IN (1) or AUDIO IN (2)
on PS660 to AUDIO OUT of the computer
3.2.7 Connecting to speaker
<Remark> Or connect to an additional amplifier before connecting to
the speaker
4. Start Using the PS660
4.1 Recommend distance
1.Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
2.Press and hold the LAMP RELEASE on both sides of the Visual
Presenter and push the latches forward to pull up the lamp arm.
3.Turning the folded lamp arm toward the platform as in the direction of the arrow.
<Note>: The angle range of the camera/lamp arm/lamp is limited. Do not
turn it forcefully when it reaches the maximal angle.
n
o
p

English - 7
4.2 Turning On
Control Panel Remote Control
zWhen using the remote control, aim at the receptor on the PS660,
and press the power button
zOnce PS660 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on
<Note> Once the password page is shown, please key in the password.
If you forget it, please contact your distributor or the service
center.
*For detailed menu function introduction and operation instructions, please refer
to the user manual.