Lupo SUPERPANEL 30 User manual

SOFTBOX
Superpanel 30
Superpanel 60
Dayled PRO 650 / 1000 / 2000
User Manual

Superpanel 30 Instructions
Mount the softbox on the Superpanel 30 models
To secure the softbox at the Superpanel 30 pass the velcro string at the edges of the panel and make sure
to thighten it. (g 1)
g. 1

Superpanel 60 Instructions
Install the softbox on the Superpanel 60 (g.1)
The black velcro string goes to the back of the
Superpanel and the white elastic string goes to
the front to x tightly the softbox. (g 1)
g. 1
g. 2
Tighten the elastic to close the gap between the softbox and the Dayled PRO until it’s xed (g. 2).

Dayled 650 / 1000 Instructions
Install the softbox on the Dayled 650 PRO and Dayled 1000 PRO (g.1)
Tighten the elastic to close the gap between the softbox
and the Dayled PRO until it’s xed (g. 2).
To tighten the string pull it through the hole and hold it.
(g. 3)
g. 2
g. 3
g. 1

Dayled 2000 Instructions
Lupo srl
Via V. Sassi 28/30 - Collegno (TO) - 10093 - Italy
phone: [phone] / e-mail: [email protected]
website: www.lupo.it
Pass the strings through the smaller barndoor and attached them
on the velcro (g.2)
FULL and HALF diffuser are needed
to expand differently the light and can
be attached at the softbox through the
velcro edges.
Install the softbox on the Dayled 2000 PRO via the barndoors. (g.1)
g. 2
g. 1