Lupo UltrapanelPRO 30 User manual

SOFTBOX
UltrapanelPRO 30
SuperpanelPRO 30
Superpanel 60
DayledPRO 650 / 1000 / 2000
User Manual

SuperpanelPRO 30 and UltrapanelPRO 30 Instructions
To use the softbox, open the velcro string
at the edges of the panel and make sure to
thighten it. (g 1)
SuperpanelPRO 30
UltrapanelPRO 30
Softbox White
Diffuser
Eggcrate
g. 1
g. 2
Attention: please note this is the right way to
mount the softbox on the SuperpanelPRO 30 or the
UltrapanelPRO 30. (g 2)
Please use the strap on the back to secure the
softbox to the panel. (g. 3)
g. 3

Superpanel 60 Instructions
Install the softbox on the Superpanel 60 (g.1)
The black velcro string goes to the back of the
Superpanel and the white elastic string goes to
the front to x tightly the softbox. (g 1)
g. 1
g. 2
Tighten the elastic to close the gap between the softbox and the Dayled PRO until it’s xed (g. 2).

DayledPRO 650 and DayledPRO 1000 Instructions
Tighten the elastic to close the gap between the softbox
and the Dayled PRO until it’s xed (g. 2).
To tighten the string pull it through the hole and hold it.
(g. 3)
g. 2
g. 3
DayledPRO 650
DayledPRO 1000
Barndoors Softbox White
Diffuser

Dayled 2000 Instructions
Lupo srl
Via V. Sassi 28/30 - Collegno (TO) - 10093 - Italy
phone: [phone] / e-mail: [email protected]
website: www.lupo.it
Pass the strings through the smaller barndoor and attached
them on the velcro (g.2)
FULL and HALF diffuser are needed
to expand differently the light and can
be attached at the softbox through the
velcro edges.
g. 2
DayledPRO 2000 Barndoors Softbox White
Diffuser