LuxenHome Rustic Sliding One Door Wood Cabinet WHIF962 User manual

For service and questions, please contact us at [e-mail].
Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of
safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts.
If any parts are missing or damaged, do not attempt to assemble or use the product.
Hardware:
Tools required for assembly: Philips screwdriver and Flathead Screwdriver (if using power tools, use with care)

For service and questions, please contact us at [e-mail].
Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
Instruction Manual
Please save this manual for future reference.
Panels:

For service and questions, please contact us at [e-mail].
Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
Instruction Manual
Please save this manual for future reference.
Tip: Make sure dowel pins (Hardware Part 1) are installed correctly as shown with the “check mark below”:
Below image shows how the dowel pins and cam locks are used to assemble the panels together. Cam locks are turned
clockwise to secure it to the dowel pin.
Step 1 – Start by assembling the base of the cabinet. The base frame contains Parts N and O. See below
Figure A. Insert dowel pins (1) into panels N. Attach panels O to panels N by inserting the other end of the
dowel pin to the panels O ends. Then secure the frame together using cam locks (2). Twist the cam lock
clockwise to firmly secure the frame.
FIGURE A
1 ×4
2 ×4

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 2 – Continue assembling the base of the cabinet, by attaching the bottom panel H to the assembled base
frame (N and O from Step 1). To do this, first insert wooden dowels (3) into underside of the bottom panel H.
Then, flip the bottom frame upside down, and attach the bottom frame (from Step 1) on to underside of bottom
panel H as shown below in Figure B. Align N and O frame to bottom panel H, and use screws (15) to secure the N
and O frame to the bottom panel H.
Turn the assembled base right side up, and insert dowel pins (1) into the top of H (see Figure C).
Set the base aside for now.
FIGURE B
FIGURE C

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 3 –This step is for assembling the sides of the cabinet. This requires the front panels F and G, and the side
panels B and C.
Start by screwing dowel pins (1) into the front panels F and G (see Figure D). Then attach front panel F to side
panel B by tightening the cam lock (2) clockwise to secure it together. Last part of this step is to attach front
panel G to side panel C by tightening the cam lock (2) clockwise to secure it together. (See Figure E.)

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 4 – This step is preparing the side of the cabinet that contains the drawers. First, use screws (16) to attach
the wood rails I to the panel C. See Figure F for reference.
Figure F
Prepare the drawer metal slides (6) by attaching to the side panels D and C using the small screws (13). See
Figure G below for reference.
Screw in the dowel pins to middle end of panels D and C.
Figure G

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 5 –Continue with the assembly of the left side of the cabinet. First insert wood dowels (3) into panels D
and C (see Figure H below). Attach bars J (there two) and K (this one is in the middle) to panels C and D by
inserting them into the other end of the wood dowels (3). This will connect the two panels together. For the bar
K, insert the cam lock and turn clockwise to secure.
Next, we are going to connect the right panel to the left side of the cabinet. Take front panel E and insert wood
dowels (3) into the ends. Then connect the sides by inserting the other side of the wood dowels to front panels F
and G. See Figure I.
Figure H

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Figure I

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 6 – Next, we are going to attach the cabinet base assembled in Steps 1 and 2 to the cabinet body. Attach
base H to the body, and tight the cam lock (2) clockwise to secure (see Figure J). Attach bracket (12) to the
underside of the panel A with screws (7).
Brackets (12) are to be used later for securing the cabinet to the wall. Insert dowel pins (1) into the underside of
panel A (see Figure K).
Figure J

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 7 – The back panel assembly is next. Gently lift the cabinet upright. Slide panels L and rod (20) into the back
of the cabinet (see Figure L). Next, attach the top panel A to the body of the cabinet lining of the wood dowels
with the holes in the underside of the panel A. Tighten the cam locks (2) clockwise to secure on panel B and C.
Secure the panel A to the cabinet body with screws (15) starting from the underside of the front panel E.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 8 – Get ready to attach the sliding door’s metal runner, and the adjustable shelves in this step. First, attach
the metal runner (17) on the front of the cabinet with bolts (8) using tool (19).
Next, decide what height you would like your shelves, and insert the layer supports (9) into the panels B and D
(make sure they are lined up correctly on each panel so the shelves will be straight). Once the layer supports are
installed, you can put in the shelves M. Next, insert dowel (14) into the side panel F. See Figure M.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 9 (Optional) – To secure the cabinet to the wall, drill hole into the wall to insert the wall plug (11). Fix the
unit to the wall using screws (10) going through the attached metal brackets (12). See Figure N.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 10 – For this step, it is time to assemble the four drawers. Insert dowel pins (1) into the backside of the
drawer front panel Q. Assemble drawer side panels R and S to the back drawer panel T using screws (16). Slide in
the drawer bottom panel U into R, S, and T assembly. Attach drawer front panel Q to the assembled R, S, T and
U, and secure with cam locks (2) by turning the clockwise. Do this four times to assemble all the drawers. Insert
each drawer into the cabinet, and secure to the metal rails with the bolt (4). See Figure O.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Step 11: Time for the sliding door! First, attach door metal rollers (18) at the top of the door front. Align and
insert the door P into the bolt (14), and pull the door up a little to hang the wheels (18) onto the metal runner
(17). Screw bolts (5) into the hole on (18). See Figure P below.

Product Name:
Rustic Sliding One Door Wood Cabinet
SKU #:
WHIF962
For service and questions, please contact us at [e-mail].
Instruction Manual
Please save this manual for future reference.
Enjoy your assembled cabinet! Please do not sit or stand on the cabinet to avoid injury.