LuxenHome WHIF899 User manual

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
Tools required for assembly: Screwdriver, flat head screwdriver, hammer, and measuring tape.
Assembly Instructions:
CARTON CONTENTS:

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
PANEL CONTENTS:

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 1
Make sure the pins are installed correctly as shown with the “check mark” below:
Below shows how the pins are used to assemble the panels together.
Place panels (1, 2, 3) on a soft flat surface. Insert and screw in A as seen below. Insert D and E as seen below.
Insert C to inner top hole of panels (2, 3).
FIGURE A

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 2
With panel 2, insert panels 4 and screw in B to lock in place.
Step 3
Insert panel 3 to panels 4. Screw in B to lock in place.

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 4
Insert panel 1 to (2, 3). Screw in B to lock in place.
Step 5
To install the cabinet on the wall, align wall mount to panel 1 and screw in G.

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 6
Secure cabinet to the wall using hardware (G), see image below.
Installation Tips
Measure the distance between the hardware on the cabinet using a measuring tape.
Locate the stud in the wall or joist in the wall where you plan to mount the storage cabinet. Use a stud finder or
tap the wall lightly with a hammer. A solid thud indicates a stud, while a hollow sound means no stud is present.
Mark the storage cabinet hardware measurement on the wall with a pencil. When possible, all screws used to
secure the storage cabinet to the wall should be in a stud.
Drill a pilot hole through the drywall and into the stud at the marked location. Use a drill bit one size smaller than
the mounting screws.
Drill a hole slightly larger than a toggle bolt for any mounting screws that won't be located in the stud. Toggle
bolts have a metal sheath that opens like wings. These wings anchor the screw when no stud is present and can
support loads of 25 pounds or more without damaging the wall.

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 7
Align I and J to panel 9 and screw in K.
Step 8
Align panels (10, 11, 12) to I and J and screw in L.

Product Name:
White Wood 18-Pair Shoe Storage Cabinet
SKU #:
WHIF899
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 9
Place drawer in cabinet. Insert F to I and J. Screw in H.
Final
Special Warnings and Cautions:
To avoid injury and/or damage, please do not sit or stand on the cabinet as this may cause
serious bodily injuries and/or product damage.