LuxenHome WHIF1610 User manual

Product Name:
Farmhouse White and Natural Wood Single Shelf Console Table
Product #:
WHIF1610
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety
and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any
parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Assembly and Instruction Procedure (no tools required for assembly):
Step 1
Flip table (Part A) upside down making sure to put on a soft surface to protect the table surface. Connect Part A (tabletop)
and Part C (table legs) by aligining the holes with the pre-installed bolt inside the leg (Part C), and turn clockwise to tighten.
Do not overtighten to prevent the wood for splitting.
Step 2
Next align the holes in Part B (shelf) to the holes in Part C (legs). Then connect the table assembly and Part D (table feet) by
aligining the holes with the pre-installed bolt inside the feet (Part D), and turn clockwise to tighten. Do not overtighten to
prevent the wood for splitting.

Product Name:
Farmhouse White and Natural Wood Single Shelf Console Table
Product #:
WHIF1610
Instruction Manual
Please save this manual for future reference.
Image for reference:
Step 3
Gently shake the table to esure that the table is sturdy. Tighten as needed without overtightening the bolts. Carefully flip
your table upright, and check again for sturdiness. Your table is ready to use!
Warning: To avoid injury and/or damage, please do not sit or stand on the table or shelf as this may cause serious
bodily harm and/or product damage.
Care: To clean, use a dry microfiber cloth to wipe the surface of the table, table shelf, and legs.