Luxier KTS08-TB User manual

Model Number:
KTS08-TB
KTS08-TC
KTS08-TO
Luxier USA
1
Traditional Kitchen Series
Tools you will need:
http://www.luxierusa.com/
Installation Guide
Single Handle Kitchen faucet
Adjustable Wrench Groove join pliers
SAFETY TIPS:
If you use soldering for the installation of the faucet, the seats, cartridges and
washers will have to be removed before using flame. Otherwise, warranty will be
void on those parts.

Model Number:
KTS08-TB
KTS08-TC
KTS08-TO
Luxier USA
2
Trouble-Shooting
If you’ve followed the instructions carefully and your faucet still does not work properly, take these corrective steps.
Please keep aerator
wrench to allow for
removal and
cleaning of aerator
Action
Tighten the retainer nut,
clean or replace O-ring
-Unscrew aerator remove
any debris, check seating of
rubber seal then re-assemble
aerator
Cause
-Retainer nut has come
loose. O-ring is dirty or
damaged
-Aerator is dirty or mis-
fitted.
Problem
-Leaks underneath handle
-Aerator leaks or has an
inconsistent water flow
pattern

Model Number:
KTS08-TB
KTS08-TC
KTS08-TO
Luxier USA
3
Replacement Parts
Limited Lifetime Warranty
Luxier USA warrants to the original purchaser that its products will be free from
defects in workmanship and materials. This warranty does not cover any other labor or
service charges associated with the removal, repair, or reinstallation of Luxier products.
This express warranty does not apply to products that have been damaged as a result of
misuse, abuse, negligence, accident, faulty installation or maintenance practices and/or
used in any manner contrary to those recommended by the manufacturer.