Luxon Video High Speed Dome Camera User manual

Auto – the camera focuses automatically.
Semiauto – the camera automatically focuses,
but it could be switch to “Manual” mode by
pressing “Near” or “Far”, and it could be switched
back to “Auto” mode by move the joystick
up/down, right/left, or zoom in/out, and the factory
default is in “Semioauto” mode.
Manual – the operator must focus the camera
manually by pressing “Near” or “Far”，
Users could switch above three modes by
calling preset 190.
DIGITAL ZOOM (ON / OFF) - disables or
enables the digital zoom. When disabled,
the maximum zoom level is (optical).
FLICKERLESS (ON / OFF) - should be set to
ON when used in certain lighting conditions
(EG Fluorescent lighting) to prevent picture flicker
COLOUR (ON/OFF) - switches the module
between colour and b/w mode
<WHITE BALANCE SETUP> - sub menu to
change the white balance settings
<AUTO EXPOSURE SETUP> - sub menu to
change the auto exposure settings