LV Furniture MINI SLEEPER HN-2018-190 User manual

ASSEMBLY INSTRUCTION
MADE IN MALAYSIA
EXAMPLE FOR SKETCH ONLY
QTY
DESCRIPTION
COMPONENT LISTS
Strips 1
NO
3
A
QTY
NO DESCRIPTION
HARDWARE LISTS
C
D
QTY
NO DESCRIPTION
B
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts that may have come loose inside the carton during
shipment.
*Screw driver is not provided.
HN-2018-190 MINI SLEEPER (CHEST)
Dowel
Ø8 X 30mm 8
18
CSK Screw
Ø3.5 x 16mm
Minifix
24mm 24
Minifix
34mm 8
Top Panel 1
1
Side Panel 22
3
4
3
5
3
6
Drawer
Bottom
Drawer
Front
Drawer
Side
(Left)
PAGE 1 OF 4
EDowel
Ø6 X 30mm 12
FHandle Screw
4 X 30mm 6
GHandle 6
QTY
DESCRIPTIONNO
3
7
Drawer
Side
(Right)
3
8Drawer
Back

ASSEMBLY INSTRUCTION
MADE IN MALAYSIA
EXAMPLE FOR SKETCH ONLY
HN-2018-190 MINI SLEEPER (CHEST)
STEP 1
Slot in the Drawer Bottom to Drawer Side Left and Right.
Use Dowels and Minifix (24mm) to connect drawer's
parts. Further tighten the Minifix by using screw driver.
Complete the step for other Drawers.
B
E
B
*
PAGE 2 OF 4
STEP 2
Attach Handles to Drawer Front with Handle Screw by
using screw driver.
F
G

ASSEMBLY INSTRUCTION
MADE IN MALAYSIA
EXAMPLE FOR SKETCH ONLY
STEP 4
Use Dowel and Minifix (34mm) to fix Top Panel to Side
Panel. Further tighten the Minifix by using Screw Driver.
HN-2018-190 MINI SLEEPER (CHEST)
C
A
STEP 3
Use Dowel and Minifix (34mm) to Connect Side Panel
and Strips. Further tighten the Minifix by using Screw
Driver.
E
C
C
PAGE 3 OF 4
C

ASSEMBLY INSTRUCTION
MADE IN MALAYSIA
EXAMPLE FOR SKETCH ONLY
STEP 6
Insert the drawers to the Cupboard accordingly.
STEP 5
Use Back Panel to cover the back part of the Cupboard
by using CSK Screw.
D
HN-2018-190 MINI SLEEPER (CHEST)
PAGE 4 OF 4