1. General safety instructions
Before first use read the manual carefully and follow the
instructions contained therein. The manufacturer is not liable
for damage caused by equipment used inappropriately or by
incorrect handling.
1.1. Operation safety
1. The dispenser is designed for manual dosing of honey
and other liquid substances.
2. Before use the device must be thoroughly cleaned
using detergents allowed in food industry using a soft
cloth. After cleaning rinse the device and allow it to dry
thoroughly
1.2. Operation safety
a) Set the device on a surface that allows full stability!
b) Make smooth movements with dosing lever "2" instead of
sudden and strong movements
c) The device is not intended for use by persons (including
children) with limited physical, sensory or mental abilities,
or by inexperienced users, unless under supervision or
with instructions given by an accountable party. This
device is not a toy, and shouldn’t be used as one. Children
should not to play with it.
2. Instructions for use
After setting the dispenser in the dedicated place and before
starting the bottling process:
Prepare the electronic weighing scale for setting the
correct dose of honey,
Adjust the shelf "5" to suit the height of the jar in
relation to the dosing nozzle "3",
Set the appropriate dose of honey with screws “6” and
pour a few test jars using the lever "2" and weighing
them to confirm the correct weight,
after setting up, start bottling and monitor the level of
honey in the main tank "1".
when the bottling is completed, rinse the device
thoroughly with warm water.
.
2. Product description (Fig.1):
1. feeding tank
2. dosing lever
3. dosing nozzle
4. height adjustment knob
5. jar shelf
6. dose adjustment screws
Fig.1
4. Technical specifications
•0H18N9 acid resistant stainless-steel
•maximum single lever pull dose - 150 ml.
•Feeding tank capacity - 14 L.
•Maximum jar/bottle size: diameter - 70mm,
height - 120mm.
Dimensions:
•length - 320mm
•width - 270 mm
•height - 710 mm
•weight - 16,5 kg.
5. Storage
Store the device in a dry room.
Clean and dry the unit thoroughly after use.
An additional technical check should be carried out
periodically, and if any defects are found, please contact the
manufacturer.
