M-Power FASTTRACK KS User manual
Manufactured by MPOWER Tools Ltd
Tel: 0044 (0)1980 629 526
Email: [email protected]
Web: www.m-powertools.com
© Copyright MPOWER Tools Ltd 2018
INSTRUCTION MANUAL
re-cycleread
version
2
FASTTRACK
KNIFE SHARPENER
Always hold knife in your dominant hand with a
light grip.
FASTTRACK KS
KNIFE SHARPENER
Thank you for purchasing MPOWER’s
FASTTRACK Knife Sharpener (KS), we really
hope you enjoy using it.
SAFETY
Before attempting to use the FTS KS, please
understand that handling knives can be
dangerous.
Users must be competent in handling knives
safely and understand safe sharpening
practices before using this product.
KNIFE GRIP
DO NOT allow blade to come away as it will
drop into the slot.
The flat of the blade must remain against the
front strop during stroke. The Magnets will help
with this.
IMPORTANT
Knife
Knife
Slot
2
Rotate Knife Sharpener 180 degrees, slot
facing in the opposite direction.
Resting the KS on a worktop, hold top of
handle with your non dominant hand. Hold
knife loosely take 4 sharpening strokes.
WORKTOP TECHNIQUE - Master this technique first
1 2
Repeat same number of full strokes.
When edge is achieved, see Strop Technique.
Repeat same number of full sharpening strokes.
Note: Always repeat the same number of
strokes per side of knife.
Rotate the KS over so that the slot faces down.
4
1 M4x10 Screw Strike Plate
3 Diamond Stone
4 Leather Strop Front
5 KS Main Body
6 Leather Strop Rear
2
EXPLODED DIAGRAM
1
3
3
23
4
5
6
1 2
FREE HAND TECHNIQUE -
Take 4 sharpening strokes the full length of the
blade in the direction of the arrow.
Hold the knife Sharpener in your non-dominant
hand. Insert the Knife.
NOTE
Depending on how damaged the knife is.
It may take 5-10 minutes work to regrind
and establish new bevels to the blade edge.
Afterwards it will only take 3 or 4 strokes on
both sides to refresh the edge.
MAINTENANCE
Store in dry clean environment, wipe
occasionally with a damp cloth.
Not Dishwasher friendly.
Cleaning Diamond stones - Use a pencil eraser
to gently rub the Diamond surface clean.
POLICY
Our continuous improvement means that
specifications may change without notice.
M.POWER Tools Limited cannot be held
liable for any material rendered unusable,
or for any form of consequential loss.
GUARANTEE
All MPOWER products are guaranteed
against any defects in either workmanship
or material, except products that have
been damaged due to improper use or
maintenance.
REMOVING DIAMOND STONES
Holding the ends of the diamond stone, unclip
it from the front plate magnet.
Slide the Diamond Stone up or out of the side.
When sharp edge is achieved; rotate Knife
Sharpener leather strop face up and wipe
blade edge across strop.
STROPPING TECHNIQUE
1
Turn Knife over and to wipe both sides of edge
across leather strop.
2
