M-system R8 Series User manual

MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 1/5
http://www.m-system.co.jp/
Remote I/O R8 Series
POWER/NETWORK MODULE
(EtherNet/IP)
Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
Typical Applications
• Remote I/O for DCS and PLC
MODEL: R8–NEIP1–R[1]
ORDERING INFORMATION
• Code number: R8-NEIP1-R[1]
Specify a code from below for [1].
(e.g. R8-NEIP1-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
NEIP1: EtherNet/IP
POWER INPUT
DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
RELATED PRODUCTS
• PC Configurator cable (model: COP-US)
• PC configurator software (model: R8CFG)
• EDS file
The EDS file and configurator software are downloadable at
M-System’s web site.
PACKAGE INCLUDES...
• Protective cover
GENERAL SPECIFICATIONS
Connection
• Power input or excitation supply: Tension clamp (Front
Twin connection)
Applicable wire size: 0.2 - 2.5 mm2
Stripped length: 10 mm
• EtherNet/IP: RJ-45 modular jack
• Internal bus or internal power or excitation supply: Via
internal bus connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: EtherNet/IP to internal bus or internal power or
power input to excitation supply to FE1
Status indicators: Power, RUN, MS, NS, LNK1, LNK2
Data allocation: Mode 1, 2
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
Connection type: Exclusive owner / Listen only / Input only
Max. number of socket connections: 3
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
(model: R8CFG).
DLR supported
Port No.: 2222, 44818
I/O data size: 40 - 140 byte (configurable with DIP SW)
Status indicator LEDs: MS, NS (Refer to the instruction
manual for details)
INSTALLATION
Power consumption
•DC: Approx. 12 W 24 V DC (@ internal power max. current

MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 2/5
http://www.m-system.co.jp/
1.6 A)
Internal power supply (power supply for I/O module):
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
•DC: 24 V DC ±10 %
•Operational current: 10 A
(From power supply (exitation supply) connector, via
connector for internal bus, supplied to each I/O module.
Power output current consumption must be under
operational current.)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 180 g (0.40 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(EthrtNet/IP to internal bus or internal power or power input
to excitation supply to FE1)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive

MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 3/5
http://www.m-system.co.jp/
EXTERNAL VIEW
Status Indicator LED
Miniature Jack Connector
for Configuration
EtherNet/IP Communication
RJ-45 Modular Jack
Fixed Address Setting
Rotary SW
Internal Bus Connector
LNK2
LNK1 Power
RUN
MS
NS
LNK1
LNK2
SA X10
X100
X1
On87654321Config
Function Setting
DIP SW
8
7
6
5
4
3
2
1
On
Connector for
Power Supply and
Excitation Supply
■STATUS INDICATOR LED
ID STATE COLOR TO INDICATE
Power ON Green Power supplied
RUN ON/Blink Green Turns on or blinks depending on the status
MS ON Green Normal operation
ON Red Critical failure
Blink Minor failure
NS On Green Connections are established
Blink Connections are not established
ON Red Critical Link failure
Blink Minor Link failure
LNK1 ON Green Link 1 is established
LNK2 ON Green Link 2 is established
CONNECTION DIAGRAMS
■POWER SUPPLY, EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT
Printed-circuit board connector (Phoenix Contact)
Unit side connector: MSTBV2,5/5-GF-5,08AU
Cable side connector: TFKC2,5/5-STF-5,08AU
PIN ID FUNCTION
No.
1 24V Power supply 24V DC
2 0V Power supply 0V DC
3 + Excitation supply 24V DC
4 − Excitation supply 0V DC
5 FE1 Grounding
1
2
3
4
5

MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 4/5
http://www.m-system.co.jp/
EXTERNAL DIMENSIONS unit: mm [inch]
■UNIT
50 (1.97) [3 (.12)]
115 (4.53)[4 (.16)]
[7 (.28)]
55 (2.17)
DIN RAIL
(35 mm wide)
[4 (.16)]
■PROTECTIVE COVER
5 (.20) 50 (1.97)
115 (4.53)

MODEL: R8-NEIP1
R8-NEIP1 SPECIFICATIONS ES-9799 Rev.0 Page 5/5
http://www.m-system.co.jp/
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.
+24V
0V
+
FE1
POWER
EXC. SUPPLY
Comm.
Circuit
Control
Circuit
JACK
EtherNet/IP
EtherNet/IP
Power
Circuit
(No isolation)
EXC. SUPPLY (24V)
INTERNAL
POWER (5V)
INTERNAL
BUS
ROTARY SW
DIP SW
Isolation
Isolation
STATUS
IND.
BUS CONNECTOR
PC CONFIGURATION JACK
RJ-45 MODULAR JACK
RJ-45 MODULAR JACK
CONNECTOR
Specifications are subject to change without notice.