MA PD-100 User manual

────────────────────────────────────────────────
User Manual – PD100 1
User Manual
PD-100

────────────────────────────────────────────────
User Manual – PD100 2
Contents
Chapter 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 2. PD-100 Operating Instructions . . . . . . . . . . . . . . 4
PD-100 at A Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Placing Bills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Auto Currency Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Result display and Clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Turn On/Off the Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward and Backward Mode changing . . . . . . . . . . . . . . . . . . . . . . . . 8
Error Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 3. Maintaining PD-100. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the PD-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Appendix. Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

────────────────────────────────────────────────
User Manual – PD100 3
Chapter1. Introduction
Abbreviations and Acronyms
LED LightEmitting Diode
USB Universal Serial Bus
IR Infrared
MG Magnetic
MB Megabyte
MA Masterwork Automodules
PC PersonalComputer

────────────────────────────────────────────────
User Manual – PD100 4
Chapter 2. PD-100 Operating Instructions
PD-100 at A Glance
LED display
Bill Path
Navigation F1
Navigation F2
Navigation F3
Battery Cover
Open the bill path
by pulling it up.
Power Socket
AC/DC Adapter
Data Socket
PC and Printer connection

────────────────────────────────────────────────
User Manual – PD100 5
Power On and Off
1. Plug in the adaptor power cord and connect the DC jack to PD100 / or
Install 4 units AA batteries.
2. To switch on the unit, press and hold the key F3 until display lights up.
3. To switch off the unit, press and hold the key F3 until display
disappears.
Placing Bills
To operate the device smoothly, please follow the instruction:
1. Avoid counting wet, excessively dirty or spoiled notes.
2. Check for foreign matter mixed with notes, i.e.: paper chips, rubber
bands, clips, dust, etc. they will jam the bill path or even damage the
sensors.
3. Remove folds or curl from the notes beforehand.

────────────────────────────────────────────────
User Manual – PD100 6
4. Put the notes along the left side of the bill path to prevent false alarms.
Auto Currency Switching.
PD100 switches the currency to the first genuine note detected. The
currency icon turns to the currency in detecting procedure.
Result Display and Clearing
1. The detecting result is shown on the LED display, including total value
and quantity.
Total value
Currency
Counted note quantity

────────────────────────────────────────────────
User Manual – PD100 7
2. Press the key F1/F2 to switch to list mode.
3. Press F1/F2 to change pages. Each page shows the subtotal and
quantity by different denominations.
Counted note quantity Subtotal
4. Press and hold the F1 to clear the result and back to main screen.
Turn on and off the buzzer.
1. Press and hold the key F3 to turn on the unit.
2. To turn off, press and hold the F2 until the display shows “ ”.
Different denomination

────────────────────────────────────────────────
User Manual – PD100 8
3. To turn on again, press and hold the F2 until making a “beep” sound
and the display shows “ ”.
“Forward” and “Backward” mode changing
1. Press and hold the key F3 to turn on the unit.
2. Press F3 again to enter note direction selecting mode and press F1/F2
to change notes’ direction.
- “ ” for forward
- “ ” for backward

────────────────────────────────────────────────
User Manual – PD100 9
3. After selecting, press F3 again to back to main screen.

────────────────────────────────────────────────
User Manual – PD100 10
Error code
1. Suspicious note: IR.
2. Suspicious note: MG.
3. Suspicious note: Double.
4. No database. The unit has no software for the
currency which just detected.
5. No paper. No banknote went through the unit.
6. 3 minutes without operating the unit, it will
turn off automatically.
7. Battery low. Please plug the adaptor or
change the batteries.
8. Full. The unit will show this code when it sums
up 100 notes. Please press F1 to clear the
result.

────────────────────────────────────────────────
User Manual – PD100 11
Chapter 3. Maintaining PD-100
Cleaning the bill path of PD-100
1. Open the bill path by pulling up the upper module.
2. Gently wipe it or dust the bill path with the brush supplied or a dry, soft
lint-free cloth.
3. If stains remain, moisten a soft, lint-free cloth with water or a 50-50
mixture of isopropyl alcohol and water that does not contain impurities.
4. Wring out as much of the liquid as you can.
5. Wipe the bill path and the sensor surface again; do not let any liquid drip
into the unit.
NOTE: Avoid spraying cleaner directly on the equipment, and be sure to
dry the bill path before closing it.

────────────────────────────────────────────────
User Manual – PD100 12
Appendix
Specification
Detection IR, MG, Color
Counting Accepted notes and total value
Available Currencies Please contact with MA
Max. Install currencies 3
Software/ Detection
Upgrade By PC
Feeder System Manual
Transport System Roller type, motorized
Detection / Counting
Speed 2 notes / sec
Banknote direction(s) 4
Display 7 Digits LED
Power Supply 100-240V / 50-60 Hz
Power Alternation AA batteries (4 units)
Power Consumption Max. 10W
Dimensions 135 x 133 x 89 mm
Weight 750g (without battery)
Packing Information 12pcs/cnt.