Madix VESTA FIXTURE User manual

NW
LEVEL
RUBBER MALLOT
TOOLS NEEDED:
PHILLIPS SCREWDRIVER
REV. DESCRIPTION DATE
01 CHANGED NAME FROM ULTRA TO VESTA 2/21/2014
ARB REV. 01
D
C
B
A
4321
432
D
C
B
2/21/14
20140221
VESTA FIXTURE
ECM # 500000014190
PO BOX 729 TERRELL, TX 75160
ASY-80034772
A
1
256-839-6354 / 214-515-5400 / 800-776-2349
SHEET 1 OF 8
20984 AL HWY 9 GOODWATER, AL 35072
© 2013 Madix Inc., All rights reserved
C
LC L
PANEL
1.000
INT DIVIDER
1.000
PANEL
END DIVIDER
NW + 1
1.500
SLOTTED
END
VESTA FIXTURE
BASE DISPLAY TABLE
UFBD
VESTA BASE DRAWER
VESTA FIXTURE
DIVIDER PANEL
VESTA FIXTURE
UFDPUI
UFDT
DIVIDER PANEL UPRIGHT END
UFDPUE
GONDOLA CORE
UFGC
UPRIGHT INTERMEDIATE
VESTA FIXTURE
UFDPUSEF
VESTA FIXTURE
DIVIDER PANEL UPRIGHT
SLOTTED END FRAME
DRAWER
BASE TABLE
ND + 0.5
NW + 1
BASE
ND + 0.5
2.000

WALL END FRAME
DESIRED SHELF DEPTH
GONDOLA
USE THIS NW DIVIDER PANEL FOR:
DOUBLE SIDED SLOTTED
DRAWER AND BASE TABLE MAY BE USED ON A GONDOLA RUN
OR ON A SLOTTED END FRAME. THIS WILL HELP YOU TO DETERMINE
WHICH SIZE PRODUCTS TO ORDER.
ASY-80034772
1
D
C
B
A
4321
432
D
C
B
VESTA FIXTURE
20140221
A
2/21/14 ARB
214-515-5400 / 800-776-2349
P.O. BOX 729 TERRELL, TEXAS 75160
PAGE 2 OF 8
ECM # 500000014190
REV. 01
© 2013 Madix Inc., All rights reserved
UFDT
UFBD
VESTA BASE DRAWER
VESTA FIXTURE
DIVIDER PANEL
UPRIGHT INTERMEDIATE
VESTA FIXTURE
DIVIDER PANEL UPRIGHT
UFDPUSEF
UFDPUI
DIVIDER PANEL UPRIGHT END
UFDPUE
GONDOLA CORE
UFGC
SLOTTED END FRAME
VESTA FIXTURE
VESTA FIXTURE
BASE DISPLAY TABLE
VESTA FIXTURE
USEABLE
DEPTH FROM
FRONT OF UPRIGHT
TO FRONT OF DIV PANEL
UFUSANL-(NW)(ND)-(TO) UFWDPU(OPT)(NW)(NH)(PANEL) UFDPU(OPT)(NW)(NH)(PANEL) UFDPUSEF(NW)(NH)(PANEL) ACTUAL UFBD(NW)(ND)(NH) UFDT(NW)(ND)(NH)(FR PANEL)(TOP PANEL)
NOM SHELF DEPTH WALL DIVIDER PANEL GOND DIVIDER PANEL GOND DIV ENDPANEL AVAILABLE DEPTH DRAWER (FLUSHED TO FRONT) BASE TABLE(FLUSHED TO FRONT)
ND 10 11.5 N/A ND 11
ND 12 14.5 ND14 ND14
ND 14 15.5 ND15 ND15
ND 14 NW20 16.5 ND16 ND16
ND 16 17.5 ND17 ND17
ND16 NW22 18.5 ND18 ND18
ND 18 20.5 ND20 ND20
ND 20 NW26 22.5 ND22 ND22
ND 20 OR 22 23.5 ND23 ND23
ND 22 NW28 24.5 ND24 ND24
ND 24 NW 30 26.5 ND26 ND26
NW24
NW30
NW32
NW36
NW42
NW48

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 3 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
STEP 3: INSTALL TOP RETAINER
AFTER INSTALLING BACK PANELS, SEAT RETAINER INTO
TOP OF UPRIGHTS. A RUBBER MALLOT MAY BE NEEDED.
AGAIN, BE SURE THE BACK PANELS ARE ALIGNED WITH
THE TRACKS IN THE TOP RETAINER, AND IT IS SEATED
ALL THE WAYINTO THE UPRIGHT.
STEP 1 : PEEL PROTECTIVE COVERING FROM
INSTALLATION.
ALL PLASTIC BACK PANELS BEFORE
STEP 2: INSERT (2) PANELS INTO TRACKS IN FRAME
HINT: DUE TO THE HIGH HEAT OF THE WELDING
OPERATIONS, THE UPRIGHTS TEND TO DRAW
INWARD, SO YOU MAY NEED TO HAVE SOMEONE
HELP YOU SPREAD THE UPRIGTS APART TO INSTALL
BACK PANELS.
BE SURE PANELS SEAT ALL THE WAY IN THE BOTTOM
OF BOTH TRACKS.
EXPLODED VIEW
FRONT VIEW
DETAIL A
SCALE 1 : 2

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 4 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
DETAIL B
SCALE 1 : 8
DETAIL C
SCALE 1 : 8
SNAP BUTTON ON BOTTOM
INSERT THE CONNECTORS ON THE
END DIVIDER PANEL(CONNECTORS
WILL ONLY BE ON ONE SIDE ON AN
END DIVIDER) INTO OPEN END OF
TUBES ON THE SIDE OF THE
GONDOLA CORE WHILE PRESSING
SNAP BUTTON ON BOTTOM.
YOU MAY NEED TO USE A MALLOT
TO DRIVE THEM TOGETHER.
INSTALL SCREW INTO HOLE IN TOP
OF CORE RETAINER
B
C

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 5 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
DETAIL J
SCALE 1 : 8
SNAP BUTTON ON BOTTOM
DETAIL H
SCALE 1 : 8
H
J
INSTALL INTERMEDIATE
DIVIDERS THE SAME AS
THE ENDS WERE INSTALLED.
INTERMEDIATE DIVIDERS
HAVE CONNECTORS ON BOTH
SIDES. INTERMEDIATE DIVIDERS
WILL BE USED UNTIL YOU ARE
AT THE END OF THE RUN, THEN
YOU WILL INSTALL ANOTHER END
OR A SLOTTED END FRAME.

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 6 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
PUSH DRAWER UP TO CORE,
AND HOOK INTO SLOTTING.
YOU CAN REMOVE THE DRAWER
OUT OF THE DRAWER BODY TO
MAKE THIS EASIER BY PULLING
DRAWER ALL THE WAY OUT, AND
PUSHING LEVERS ON THE DRAWER
SLIDES TO RELEASE.
IF DESIERED, YOU MAY ALSO REMOVE
THE LEVELING LEGS TO ALLOW THE DRAWER
TO BE ALL THE WAY ON THE GROUND.

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 7 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
THE VESTA BASE TABLE
CAN TAKE A LEDge LIGHT. IF LIGHTING IS NEEDED,
SIMPLY SET LIGHT STICK MAGNET SIDE DOWN
INTO THE REAR OF TABLE, AND FOLLOW
LEDge INSTALLATION INSTRUCTIONS.
TO INSTALL BASE TABLE
SLIDE IT UP TO THE CORE, AND
HOOK IT INTO THE SLOTTING.

D
C
B
A
4321
432
D
C
B
A
20140221
1
ASY-80034772
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 8 OF 8
ECM # 500000014190
REV. 01
2/21/14
VESTA FIXTURE
ARB
© 2013 Madix Inc., All rights reserved
ANY 2 TAB MADIX SHELVING MAY
BE USED WITH THE ULTRA FIXTURE
PICTURED ARE OUR STRAIGHT IN
UFUSA SHELVES WHICH HOOK
STRAIGHT INTO THE CORE, OR END FRAME.
DETERMINE IF VERSA BUS BAR
STRIP AND LEDge LIGHTS ARE
TO BE USED BEFORE
INSTALLING SHELVING! IF SO,
INSTALL VERSA STRIPS USING
THE SUPPLIED INSTALLATION
INSTRUCTIONS (VERSA MADIX DOCUMENT
ASY-80034765 OR LEDge MADIX DOCUMENT
ASY-80017242).