Madix Y GONDOLA 80015871 Quick start guide

YSGBR, BACK RETAINER
CENTER SPANNERS
INSERT INTO THE
SLOTS FROM THE
TOP.(SEE NOTE 4)
YSGJSC
CENTER SPANNER
MAKE SURE CHANNELS
ON SPANNERS ARE
INSTALLED ON OUTSIDE
AT BOTTOM. (SEE NOTE 2)
YSGBR
BACK RETAINER
YSGJSC
CENTER SPANNER
1: ASSEMBLE UPRIGHTS, BASE SHOES,
LOWER SPANNERS, AND CENTER SPANNERS.
ALSO INSTALL (1) BACK PANEL INTO EACH
"Y" GONDOLA SECTION. THIS WILL HELP TO
KEEP THE RUNS STABLE.
SEE STORE LAYOUT FOR LOCATIONS.
NOTE: REFERENCE ASY-046 FOR ASSEMBLY
INSTRUCTIONS ON BASIC GONDOLA
COMPONENTS.
2: INSERT (3) RETAINERS FLUSH WITH THE
BOTTOM SPANNERS, AND THEN INSTALL
(3) CENTER SPANNERS FROM THE TOP
THROUGH THE SLOTS, MAKING SURE THAT
THE TRACK FACES OUT SO THE BACKS WILL
HAVE SOMETHING TO REST INTO.
3: AT "Y" JUNCTION INSERT THE BACK
RETAINERS INTO THE UPRIGHTS AT THE SAME
HEIGHT AS THE OTHER CENTER SPANNERS.
4: ONCE RETAINERS ARE IN POSITION, INSERT
THE CENTER SPANNERS FROM THE TOP,
THROUGH THE SLOTS OF THE RETAINERS,
MAKE SURE THAT THESE SPANNERS HAVE
THE TRACK FACING TOWARDS THE INSIDE
OF THE JUNCTION. THIS WILL ALLOW THE
BACKS TO BYPASS THE SPANNERS.
REV. DESCRIPTION DATE
D
C
B
A
4
3
2
1
4
3
2
D
C
B
A
1
Asy-80015871
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 1 OF 4
ECM # 500000011726
REV. 02
01/08/09 CAB
ASY FOR INSIDE Y GONDOLA
CRITICAL NOTE - READ THIS BEFORE INSTALLING ANY PARTS:
CORNER SHELVES, BOTH BASE AND UPPER, WILL NEED TO BE
INSTALLED FIRST TO INSURE THAT THERE IS ROOM INSIDE
UPRIGHTS FOR ALL SHELVING

YSGJTC
TOP CAP TRACK ASSEMBLY
YSGIKP(ND)
INSIDE CORNER
KICKPLATE
YSGB(_)(NH)I
INSIDE CORNER BACK
5: LOWER REMAINING STANDARD
BACKS AND CORNER BACKS FROM
THE TOP UNTIL THEY REST IN THE
LOWER SPANNERS.
NOTE: DO NOT DROP BACKS,
DOING SO COULD CAUSE DAMAGE
TO THE SPANNERS.
6: ATTACH TOP SPANNERS, AND
TOP TRACK AT "Y" JUNCTION. THE
TOP TRACK INSTALLS SIMILAR TO
THE STANDARD TOP SPANNERS.
7: INSTALL KICKPLATES. CORNER
KICKPLATES INSTALL THE SAME
WAY AS STANDARD KICKPLATES.
D
C
B
A
4
3
2
1
4
3
2
D
C
B
A
1
Asy-80015871
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 2 OF 4
ECM # 500000011726
REV. 02
01/08/09 CAB
ASY FOR INSIDE Y GONDOLA

YSGIBS(ND)
INSIDE CORNER
BASE SHELF
LIP ON SHELF
SKIN GOES ON
THE OUTSIDE
OF BRACKETS
YSGICUS(ND)
INSIDE CORNER
UPPER SHELF
8: INSERT CORNER BASE SHELVES.
THESE INSTALL IN SAME MANNER AS
STANDARD BASE SHELVES.
9: INSERT THE BRACKETS FOR THE
UPPER CORNER SHELVES INTO THE
UPRIGHTS AT THE HEIGHT NEEDED.
ONCE BRACKETS ARE IN PLACE
LOWER THE SHELF SKIN OVER THE
TOPS OF THE BRACKETS AS SHOWN.
CRITICAL NOTE:
CORNER SHELVES, BOTH BASE AND
UPPER, WILL NEED TO BE INSTALLED
FIRST TO INSURE THAT THERE IS
ROOM INSIDE THE UPRIGHTS FOR ALL
OF THE SHELVES.
D
C
B
A
4
3
2
1
4
3
2
D
C
B
A
1
Asy-80015871
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 3 OF 4
ECM # 500000011726
REV. 02
01/08/09 CAB
ASY FOR INSIDE Y GONDOLA

HARDWARE INSERTS
THROUGH FRONT AND
REAR OF BRACKETS
10: INSTALL THE REMAINING UPPER
AND BASE SHELVES.
11: FINALLY, SECURE THE UPPER
CORNER SHELVES TO THE ADJACENT
SHELVES BY ATTACHING (2) 1/4-20x3/4"
BOLTS AND (2) 1/4-20 NUTS THROUGH
BOTH SIDES OF THE CORNER SHELVES.
THIS HARDWARE WILL BE PROVIDED
WITH THE UPPER CORNER SHELVES.
D
C
B
A
4
3
2
1
4
3
2
D
C
B
A
1
Asy-80015871
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 4 OF 4
ECM # 500000011726
REV. 02
01/08/09 CAB
ASY FOR INSIDE Y GONDOLA