Operating Instructions
DIRECTIONS FOR USE
1. ON: Press the power control.
2. FAN SPEED: Low speed: white light / High speed: orange light.
3. UVC: Blue light (indicates it’s on).
4. NIGHTLIGHT: To activate hold UV-C control button for 5 seconds.
A replaceable aroma pad is included in the aroma tray on
the back of the unit.
1. Remove the tray cover.
2. Remove the pad.
3. Add a few drops of oil.
4. Return the pad and tray cover onto the purifier.
CHARGING INSTRUCTIONS
The power control will be slow pulsing red when the battery drops below 25% and needs charged.
TO CHARGE: Plug the USB cord into the charging port on the purifier and the other end into a USB wall charger
or charging port on a computer, in a car, etc.
CHARGING INDICATOR: As the battery charges the power control light will change to a flashing white.
FULLY CHARGED: When fully charged a solid white will emit.
RUNNING TIME: High Speed - up to 1.5 hours. Economy speed - up to 8 hours. These times do not include
running times with UV light on and active.
FILTER REPLACEMENT INDICATOR
Filter Replacement Indicator.
The power control will turn to a solid red.
AVERAGE FILTER REPLACEMENT LIFE
Depending on environmental conditions filters remain
effective for anywhere between 6-12 months ( based on
usage and conditions).
REPLACING THE HEPA FILTER
1. Turn purifier off
2. Twist filter base on bottom of purifier counterclockwise
to unlock.
3. Remove filter and replace with a new one.
4. Reattach the filter base by twisting clockwise to lock.
5. Push and hold the power button for 5 seconds to reset the filter change indicator.
The HEPA filter is not washable.
NEVER wet the HEPA filter - it will cause it to mal function and must be replaced.
IMPORTANT: Use Maestro GENUINE Replacement Filter.
UV LIGHT: The purifiers UV-C LED light is not a serviceable or replaceable part.
