Magic Chief MCC3GSM-2 User manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR GRANITA/
SLUSH MACHINE AND KEEP IT FOR FUTURE REFERENCE.
Granita/Slush Machine
User's Manual
Model MCC3GSM-1/MCC3GSM-2/MCC3GSM-3
PULL PULL PULL PULL PULL PULL

ENG-2
PRODUCT REGISTRATION
Thank you for purchasing a Magic Chef®Commercial product. The first step to protect your new product is
to complete the product registration on our website: www.mcappliance.com/register. The benefits of
registering your product include the following:
1. Registering your product will allow us to contact you regarding a safety notification or product update.
2. Registering your product will allow for more efficient warranty service processing when warranty
service is required.
3. Registering your product could act as your proof of purchase in the event of insurance loss.
Once again, thank you for purchasing a Magic Chef®Commercial product.

ENG-3
TABLE OF CONTENTS
PRODUCT REGISTRATION ...........................................................................2
GENERAL INFORMATION ...........................................................................4
PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SPECIFICATIONS ...................................................................................6
CIRCUIT DIAGRAM .................................................................................7
SAFETy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ASSEMbLy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
USE ..............................................................................................16
CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TROUbLEShOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
LIMITED WARRANTy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ENG-4
GENERAL INFORMATION
Read This Manual Carefully
This user manual is intended to help you operate and maintain your new appliance properly. Keep it handy
to answer your questions. If you do not understand certain aspects or you need additional help, please call
Magic Chef®Commercial Customer Service at 1-866-789-0202. Keep proof of the original purchase date (i.e.
sales receipt) with this manual to establish the warranty period.
Use and Storage of the User Manual
Inside this user manual, you will find information on how to use and maintain your appliance properly, including
but not limited to, safety instructions and precautions, assembly and use instructions, troubleshooting, and
warranty conditions. Please store this user manual in an easily-accessible location for future reference.
Intended Use
Your appliance is designed for food preparation as described in this user manual. DO NOT use this appliance
for any other purpose. This product is intended for indoor use only. Your new appliance comes equipped
with a one-year parts and labor warranty. Please contact Magic Chef®Commercial Customer Service at 1-866-
789-0202 for more information or to request warranty service.

ENG-5
PARTS
PULL PULL PULL PULL PULL
MCC3GSM-1
The Master Power Switch and
the Light Switch are located
on the back panel of the
appliance.
The Mixing Motor Switch and
the Freeze/Cool Selection
Switch are located on the
right-hand panel of the
appliance.
Left: MCC3GSM-2
Right: MCC3GSM-3
Double and triple the quantity
of all the parts and switches
indicated above for models
MCC3GSM-2 and MCC3GSM-3,
respectively.
PULL
Lid
Display Header
Plastic Chamber
Pull Tab Lever
Dispenser
Mixing Motor Switch
Master Power Switch
Freeze/Cool Selection Switch
Light Switch
Drip Tray

ENG-6
SPECIFICATIONS
MCC3GSM-1 MCC3GSM-2 MCC3GSM-3
Product Title Granita/Slush Machine
Unit
Product Dimensions
(Width x Height x Depth)
8.4" x 32.8" x 18.9"
213 mm × 833 mm × 480 mm
15.8" x 35.2" x 18.9"
400 mm × 894 mm × 480 mm
23.6" x 35.2" x 18.9"
600 mm × 894 mm × 480 mm
Housing Stainless Steel
Insulation Urethane Foam
Electric
Feature
Power Consumption 110 V / 60 Hz
Rated Power 440 W 1270 W 1449 W
Current Consumption 5.8 A 11.5 A 12.6 A
Geared Motor 1 Each 2 Each 3 Each
Fan Motor 9 W or Below 16 W 16 ~ 34 W
Freezing
Compressor Fully Closed
Condenser Pin Tube Type
Evaporator Tube-Launched Drum Type
Cooling Type Capillary Tube
Refrigerant R-134A R-404A R-404A
Miscellaneous
Proper Material
Quantity 3.0 Gallons x 1 Chamber 3.0 Gallons x 2 Chamber 3.0 Gallons x 3 Chamber
Control Method Torque and TC Control
Provisions
Manual – 1 Each
Rubber Ring – 1 Each
Rubber Packing – 1 Each
Lamp – 1 Each
Edible Grease – 1 Each
Manual – 1 Each
Rubber Ring – 2 Each
Rubber Packing – 2 Each
Lamp – 2 Each
Edible Grease – 1 Each
Manual – 1 Each
Rubber Ring – 3 Each
Rubber Packing – 3 Each
Lamp – 3 Each
Edible Grease – 1 Each
Operating
Environment Ambient Temperature: 50°F/10.0°C ~ 100°F/38.0°C

ENG-7
CIRCUIT DIAGRAM
MCC3GSM-1
CIRCUIT DIAGRAM
MCC3GSM-2
CIRCUIT DIAGRAM
SyMbOL
bR
O
G
V
b
R
y
bL
Gy
W
COLOR
bROWN
ORANGE
GREEN
VIOLET
bLACK
RED
yELLOW
bLUE
GRAy
WhITE
SyMbOL
bR
O
G
V
b
R
y
bL
Gy
W
COLOR
bROWN
ORANGE
GREEN
VIOLET
bLACK
RED
yELLOW
bLUE
GRAy
WhITE

ENG-8
MCC3GSM-3
CIRCUIT
DIAGRAM
SyMbOL
bR
O
G
V
b
R
y
bL
Gy
W
COLOR
bROWN
ORANGE
GREEN
VIOLET
bLACK
RED
yELLOW
bLUE
GRAy
WhITE

ENG-9
SAFETY
Read and understand all safety precautions. Failure to follow all instructions described in this user manual may
result in electric shock, fire and/or serious personal injury. The warnings, cautions and instructions discussed in
this user manual cannot cover all possible conditions and situations that may occur. It must be understood by
the user that common sense and caution are attributes which cannot be built into the appliance, but must be
supplied by the user.
Explanation of Symbols
Recognize these symbols:
This is a safety warning symbol used to warn users of any potential risk of injury or damage to property. The
seriousness is classified by the below indications. Compliance with the safety precautions for the symbol will
help prevent the risk of injury, death or property damage.
DANGER If you neglect this symbol and use the appliance incorrectly, it may cause death or
serious injury.
WARNING If you neglect this symbol and use the appliance incorrectly, it may cause a potential
risk of death or serious injury.
CAUTION If you neglect this symbol and use the appliance incorrectly, it may cause a potential
risk of injury and/or property damage.
Electric Power
If an electric circuit is overloaded with other appliances, the granita or slush machine may not operate
properly. The appliance should be operated on a separate electrical circuit from other operating appliances.
IMPORTANT: You must check the electrical rating on the nameplate of the appliance. The nameplate
is attached on the rear of the appliance. The nameplate specification has priority over information in this
manual. The electric circuit diagram of the appliance is attached to the inside of the panel. In addition, the
product design and specification is subject to change without prior notice.
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit, the grounding plug reduces the
risk of electric shock by providing an escape wire for electric current. This appliance is equipped with a power
cord that has a grounding wire with a grounding plug. As a result, the plug must be plugged into an electrical
outlet that is properly installed and grounded.

ENG-10
This appliance requires a standard 120 Volt, 60 Hz electrical outlet with a 3-slot ground receptacle. To prevent
accidental injury, the cord should be secured behind the appliance and not left exposed or dangling.
WARNING: Improper use of the grounding plug and/or outlet can result in a risk of electric shock. Consult
a qualified electrician or serviceman if the grounding instructions are not completely understood.
WARNING: DO NOT cut or remove the third (ground) prong from the power cord under any circumstances.
IMPORTANT SAFETY INSTRUCTIONS
Receptacle
Box Cover
3-Slot
Receptacle
3-Prong Plug
WARNING: This appliance should be properly
grounded for your safety. The power supply cord
of this appliance is equipped with a 3-prong plug
which mates with a standard 3-slot receptacle wall
outlet to minimize the possibility of electric shock.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
WARNING: DO NOT move the appliance by
pulling on the power supply cord.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
WARNING: DO NOT forcibly bend the power
supply cord or place any heavy material on it. To
prevent accidental injury, the power supply cord
should be secured behind the appliance and not left
exposed or hanging.
— If you do not follow these instructions, it may
cause electric shock or fire.
WARNING: Remove water or dust from the
power plug and insert it fully into the outlet.
— If you do not follow these instructions, it may
cause electric shock or fire.
CAUTION: When not using the appliance for an
extended period of time, disconnect the power plug
from the outlet and keep the unit properly clean
and maintained.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
CAUTION: Keep the unit properly cleansed and
maintained at all times.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
WARNING: When the power plug is damaged, DO
NOT replace it arbitrarily; have a qualified electrician
or service technician perform the repairs.
— If you do not follow these instructions, it may
cause electric shock or fire.

ENG-11
WARNING: NEVER unplug the appliance by
pulling the power supply cord. ALWAYS grip the
plug firmly and pull straight out from the receptacle.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
DANGER: DO NOT touch or remove the power
plug with wet hands.
— If you do not follow these instructions, it may
cause electric shock, serious injury, death or fire.
WARNING: When the power plug is removed
from the outlet, reinsert it after 5 minutes.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
WARNING: When repairing the appliance or
replacing any parts, remove the power supply cord
from the outlet, and only have a certified commercial
technician examine the unit.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, fire, and
void the limited warranty.
DANGER: DO NOT connect multiple items to a
single outlet.
— If you do not follow these instructions, it may
cause serious injury, death or fire.
DANGER: DO NOT connect the power supply cord
arbitrarily and DO NOT, under any circumstances, cut
or remove the third ground prong from the supplied
power plug.
— If you do not follow these instructions, it may
cause electric shock, serious injury, death or fire.
CAUTION: Use this appliance as described in this
user manual.
— If you do not follow the instructions, it may
cause an electric shock or property loss.
— Before supplying power, check whether the
voltage is the same as the one on the nameplate.
— This appliance must be grounded. In the event of
an electrical short circuit, the grounding plug reduces
the risk of electric shock by providing an escape
wire for electric current. This appliance is equipped
with a power supply cord that has a grounding
wire with a grounding plug. The plug must be
plugged into an electrical outlet that is properly
installed and grounded.
DANGER: Keep this appliance away from any
flammable materials.
— If you do not follow these instructions, it may
cause a fire or explosion due to an electric spark,
resulting in serious injury or death.
DANGER: DO NOT use any flammable sprays,
such as pesticides and air fresheners, near the
appliance.
— If you do not follow these instructions, it may
cause a fire or explosion due to an electric spark,
resulting in serious injury or death.
CAUTION: DO NOT operate the appliance in a
humid area. This appliance is susceptible to rust and
electric shock in damp areas. Wipe any moisture
with a clean, soft cloth.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
CAUTION: Use the appliance in a well ventilated
area.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.

ENG-12
DANGER: If a gas leak occurs near the appliance,
DO NOT touch the appliance whatsoever. Opening
the door or disconnecting the power plug may
cause an explosion due to an electric spark.
— DO NOT use or touch the appliance.
— Fully seal the gas leak.
— Open the window for ventilation.
— If you do not follow these instructions, it may
cause a fire or explosion due to an electric spark,
resulting in serious injury or death.
CAUTION: DO NOT intentionally apply force to
nor hang onto the pull tab lever or dispenser.
— If you do not follow these instructions, it may
cause personal injury, property damages and the
appliance to fail.
WARNING: DO NOT operate the appliance
without all the panels securely fastened.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, fire or
personal injury.
WARNING: If the appliance is making irregular
noises or it does not operate properly, disconnect
the power plug and contact Customer Service.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock or fire.
WARNING: Check the supplied power supply
cord. DO NOT use the appliance if the PVC coating
of the power cord is stripped off or the shunt
socket is worn.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, fire or
serious injury.
CAUTION: For maximum performance, please
operate the appliance in the recommended ambient
temperatures between 41°F/5.0°C ~ 85°F/29.5°C
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.
WARNING: DO NOT spray water directly onto
the appliance; use a clean, damp towel.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, or fire.
WARNING: Before cleaning for food sanitation,
disconnect the power plug from the outlet. Clean,
sterilize and maintain the appliance daily.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, or fire.
WARNING: DO NOT insert your finger or any
other objects into any ventilation slots in the panel
or the dispenser.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, fire or
serious injury.
WARNING: DO NOT clean the appliance, remove
the chamber, spiral, or any panels without first
disconnecting the power plug from its electrical
source.
— If you do not follow these instructions, it may
cause electric shock or fire.
CAUTION: DO NOT hold the appliance by its
chamber or evaporator drum while operating the
machinery. The manufacturer assumes no
responsibility for any damage caused by careless
handling.
— If you do not follow these instructions, it may
cause the appliance to fail or electric shock.

ENG-13
ASSEMBLY
Assembling the Appliance
1. Attach drip tray to its original front
bottom position located underneath
the spout of the chamber.
2. Apply grease to the two piston rings
and spiral using the supplied grease
from the manufacturer or purchase
commercially approved edible
grease. (See A and B in Figure 1)
3. Assemble the dispenser and pull tab
lever using the supplied parts. (See
Figure 2)
4. To remove parts, release the pin and
remove the pull tab lever, push
down the spring and plastic piston
to release then wash all parts.
CAUTION: Ensure the wide border of
the gasket faces the wall. (See Figure 3)
CAUTION: Before attaching the
packing cushion, apply edible grease to
the inner part of the packing cushion.
After assembly, apply the outer area with
edible grease.
5. Attach the insulation rubber sphere
to the area shown in Figure 3, add
the packing cushion first in front
shown in Figure 4, then attach the
plastic spiral properly to the packing
cushion first then finishing with the
attachment of the chamber. (See
Figure 4)
6. Align the chamber and push it fully
into the packing cushion and fixing
latch. (See Figure 5)
A
B
Figure 1
Figure 3Figure 2
Figure 4
Figure 5
packing cushion

ENG-14
7. After the chambers are washed and rinsed of all sterilizing solution, use a clean, damp cloth and wipe
down all areas to remove any remaining liquids.
CAUTION: To reuse the appliance after an extended period of time, reapply edible grease to the packing
cushion. Otherwise, noise may be heard from the appliance during operation, resulting in damages to
components.
Disassembling the Appliance
WARNING: Before disassembly and
cleaning, disconnect the power plug
from the electrical outlet.
1. Remove the lid from the chamber.
2. Lift the front of the chamber
upwards to unlock the latch. (See
Figure 6) Then pull the chamber
out towards you. (See Figure 7)
3. Remove the spiral by pulling it out
towards you (See Figure 8) and then
remove the packing cushion. (See
Figure 9)
4. Remove the rubber cushion. (See
Figure 10)
5. Disassemble the dispenser and
pull tab lever as shown in the
figure. (See Figure 11)
6. Lift the drip tray, and then pull the
tray out. Empty the drip tray.
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10 Figure 11
This manual is intended to help you operate and maintain your new appliance properly. Keep it handy for
reference purposes. This appliance requires regular cleaning and maintenance. Any disassembly or cleaning
negligence or mistakes may cause the appliance to fail.

ENG-15
INSTALLATION
WARNING: DO NOT install the appliance near a
heat generating source.
— If you do not follow these instructions, it may
cause a fire or the appliance to fail.
DANGER: DO NOT install the appliance near
combustible gases or inflammable materials.
— If you do not follow these instructions, it may
cause a fire or explosion due to an electric spark,
resulting in serious injury or death.
CAUTION: DO NOT intentionally apply force or
shock to the appliance.
— If you do not follow these instructions, it may
cause the appliance to fail or property damage.
WARNING: For proper ventilation, maintain a
distance of at least 12 inches (30 cm) around the
sides and rear of the appliance.
— If you do not follow these instructions, it may
cause a fire or the appliance to fail.
CAUTION: Firmly fix the appliance by using the
adjustable leveling legs to stabilize the appliance.
Adjust the vertical balance of the appliance first,
and then the horizontal balance.
— If you do not follow these instructions, it may
cause vibrations and noise or the appliance to tip
over, resulting in property damage or injury.
WARNING: DO NOT install the appliance near a
water source as well as humid or dusty areas.
— If you do not follow these instructions, it may
cause an electric shock, fire or the appliance to fail.
CAUTION: Use extreme caution when moving
the appliance.
— If you do not follow these instructions, it may
cause personal injury, property damage or the
appliance to fail.
WARNING: DO NOT use outdoors; this appliance
is designed for indoor use only.
— If you do not follow these instructions, it may
cause an electric shock, fire, property damage or
the appliance to fail.
CAUTION: DO NOT install the appliance on a
weak or uneven surface.
— If you do not follow these instructions, it may
cause vibrations and noise or the appliance to tip
over, resulting in property damage or injury.
WARNING: Check the appliance for damages
before initial use.
— If you do not follow these instructions, it may
cause the appliance to fail, electric shock, fire or
serious injury.

ENG-16
1. Clean and sterilize the appliance parts according to the instructions in this manual. See "Care and
Maintenance" on page 18.
2. Fill up the granita or slush mixture up to the level specified on the chamber. NEVER overfill it. The optimal
quantity (in liters or gallons) is written on the surface of the chamber.
3. Make sure to completely dilute the granita or slush mixture in a separate container, then add the final
mixture into the respective chamber of the appliance.
4. ALWAYS follow the directions and measurements provided by the manufacturer of the syrup or mixture,
to achieve the best granita or slush results.
CAUTION: A responsible adult should ALWAYS handle this appliance; not to be used by children,
incapacitated people or individuals with any physical conditions.
IMPORTANT: The raw mixture quantity may vary by the granita or slush type and its sugar content. If the
granita or slush touches the lid cover, reduce the quantity of the raw mixture.
Controllers
The Master Power Switch and Light Switch are located on the back panel of the appliance.
A. Master Power Switch
• Position "ON ( )" : All appliance functions and switches are activated. The fan
motor is running.
• Position "OFF ( )" : All appliance functions are deactivated and the fan motor
is no longer running.
B. Light Switch
• Flip the Light Switch to activate the bulb inside the display header. If the bulb
inside the display header is not lit, check whether the spring cord on the top of
the cap is properly inserted and connected.
• If the life of the bulb has expired, remove the bottom panel of the cap and replace the lamp (12 V & 21 W).
If the life of the lamp has expired, replace with same parts as necessary.
Each chamber is controlled by an individual Freeze/Cool Selection Switch; the chamber can be toggled
between the Freeze or Cool modes. The individual Mixing Motor Switches and Freeze/Cool Selection
Switches are located on the right hand panel of the appliance.
• In "Freeze" mode, the viscosity of the granita or slush mixture is controlled by the bolt on the rear of the
appliance.
POWER
ON
OFF
LIGHT
ON
OFF
USE
Figure 12

ENG-17
• In "Cool" mode, the temperature of the drink is controlled by a thermostat.
• For more information about the temperature and viscosity settings, see "Operation" below.
The switches in Figure 13 function as follows:
C. Mixing Motor Switch
• Position "OUTPUT": The spiral motor is running and the Freeze/Cool Selection Switch is activated.
• Position "STOP": The fan motor is turned off.
D. Freeze/Cool Selection Switch
• Position "FREEZE ( )": The appliance is running in granita or slush mode.
• Position "STOP ( )": The "Freeze" and "Cool" modes are deactivated.
• Position "COOL ( )": The appliance is operating in refrigeration mode.
Operation
1. Place the Master Power Switch in the position "ON ( )".
2. Place the Mixing Motor Switch in the position "OUTPUT".
3. Set the Freeze/Cool Selection Switch as follows:
• Place the Freeze/Cool Selection Switch in the position "FREEZE ( )" to make granita or slush.
• Place the Freeze/Cool Selection Switch in the position "COOL ( )" to refrigerate beverages.
Figure 13
MCC3GSM-3
OUTPUT
STOP
FREEZE
STOP
COOL
LEFT CENTER RIGHT
MCC3GSM-1
OUTPUT
STOP
FREEZE
STOP
COOL
MCC3GSM-2
OUTPUT
STOP
FREEZE
STOP
COOL
LEFT RIGHT

ENG-18
CARE AND MAINTENANCE
IMPORTANT: Only procedural instructions are provided in this manual.
1. To ensure optimal performance and taste, the appliance should be periodically cleaned and sterilized.
2. Before disassembly and cleaning, be sure to remove all granita or slush mixtures from the chambers by
following these steps:
• Place the Master Power Switch in the position "ON ( )".
• Place the Freeze/Cool Selection Switch in the position "STOP ( )".
• Place containers beneath each dispenser and extract all granita or slush mixtures from the chambers.
• Once the chambers are empty, place all control switches in the position "STOP ( )".
3. Daily maintenance: Remove and clean the inner parts including the base, side panels, and condenser.
4. To prevent damage to the appliance, apply edible grease on all surface areas of the respective parts
described in this manual.
5. Keep the appliance and condenser properly cleansed and maintained at all times.
Cleaning The Appliance
WARNING: This appliance is NOT DISHWASHER SAFE. DO NOT wash any parts using a dishwasher.
1. Prepare a cleaning solution mixed with five liters of warm water and dish detergent. DO NOT use abrasive
cleaners or scouring pads to clean any part of the appliance.
2. After cleaning the chambers, activate the supply switch to extract the cleaning solution.
3. Frequently empty the remaining mixture in the chambers by refilling and draining the chambers with
more cleaning solution.
CAUTION: Deactivate the Freeze/Cool Selection Switch. It may cause the spiral to freeze or the motor to fail.
WARNING: To prevent damage to the appliance, use nonabrasive dish detergent when cleaning plastic parts.
4. Use the proper brushes to wash the disassembled parts using the cleaning solution.
CAUTION: When cleaning the appliance, avoid any water contact with electrically running parts. It may
cause the appliance to fail or electric shock.
5. DO NOT spill any liquid on the cover of the motor located on the rear of the appliance.
6. Use a soft bristle brush to clean the cylinder of the evaporator.
7. Use clean, cold water when rinsing all the parts.

ENG-19
8. Be sure to remove and clean the screen filter located on the side panel on a monthly basis using lukewarm
water at around 77°F/25.0°C or with a neutral detergent solution. Dry the filter and reinstall it into its
original position. If proper ventilation is not maintained, dust will accumulate and eventually appliance
failure may follow, resulting expenses not covered under warranty.
Cleaning The Condenser
1. Slide out the side filter screen, using a screw driver remove the screw located at the bottom panel, then
remove the side panel to clean the condenser.
2. Use a vacuum cleaner or a soft brush to remove all dirt and build up from the condenser.
Sterilizing The Appliance
The appliance should be sterilized before operating. After sterilizing the appliance, DO NOT let it sit for an
extended period of time.
1. Wash your hands with anti-bacterial soap.
2. According to food safety regulations and manufacturer specifications, prepare five liters of warm
(113°F/45.0°C to 140°F/60.0°C), sterilizing solution consisting of a tablespoon of chloride condense
liquefaction or sodium chlorate diluted with two liters of water (100 ppm).
3. Soak all removable parts in the sterilizing solution for five minutes.
4. Place the sterilized parts on a clean and dry area for drying.
5. Wipe down all the surfaces of the appliance.
6. DO NOT spill any liquid on the cover of the motor that is located on the rear of the appliance.
Sterilizing The Chambers
The assembled chambers and its respective parts should be properly sterilized and thoroughly rinsed with
clean, cold water before use.
1. According to food safety regulations and manufacturer specification, prepare five liters of warm
(113°F/45.0°C to 140°F/60.0°C) sterilizing solution (remaining chloride 100 or bleach).
2. Fill the chamber with sterilizing solution.
3. Use nonabrasive brushes to wipe the surfaces projected above the solution level and the lower area of
the chamber immersed with the sterilizing solution.
4. Attach the chamber cover and operate the appliance to mix the sterilizing solution for about two
minutes. Drain the sterilizing solution from the chamber via the dispenser.

ENG-20
5. Use fresh, clean water to remove the remaining sterilizing solution from within and on the surface of the
chamber. Afterwards, DO NOT rinse the sterilized parts again.
Repairs
CAUTION: Repairs are to be performed by a certified commercial appliance technician only.
1. Only allow a certified commercial appliance technician to service the unit for any mechanical problems.
2. Any service call or technician that operates on the appliance without the prior consent or authorization
from the manufacturer will void the warranty and compressor terms expressed in this user manual.