MAGINON IPC-100AC Reference guide

Brief instructions for Windows-Computer - IPC-100AC
Unpacking
Carefully unpack the surveillance camera and check that all parts listed below are present:
1. Maginon IPC-100AC
2. Power supply
3. LAN cables
4. Wall fixing
5. Alarm connector
6. Installation material (not shown)
7. Software-CD
8. Instruction manual
9. Warranty documents
Your surveillance camera
Caution! Keep plastic foil and bags away from babies and small children as danger of suocation.
1
2
3
4
5
7
8
9
1. Lens
2. Infrared LEDs
3. Sensor
4. Focus ring
5. WLAN aerial
6. Audio output (no function)
7. Network connection (LAN)
8. Mains adapter (DC 5V)
9. Alarm connector (In/out)
10. Reset button
11. Microphone
1
6
5
3
2
89
10.
90°
330°
7
4
Note:
Set camera focus using focusing
ring (4)
11.

Create routine connection
1 2
Connect surveillance camera to router using supplied network cable.
In the event of your router not having a connection for the network cable, see information in manual.
Connect to mains
1
Connect supplied power supply rst to surveillance camera and then to socket.
Hardware installation

Place supplies software CD into CD/DVD drive of your computer. The following CD menu appears:
Click on“Maginon IPCam“ to install the program Maginon IPCam Cong. Follow installation instructions on screen.
Conguring the surveillance camera
On the computer start program Maginon IPCam Cong, located under Start --> All programs .
Select “Start search”to search for the surveillance camera in the network.
Select the surveillance camera from the list and the select“Settings”.
Software installation

The Supra Space
Your Maginon IPC-100AC has been set up for simple camera installation. For this purpose we have provided a Cloud solution that can be quickly and
easily set up. After installation you can access the camera any time via Supra Space.
A Cloud is a platform on the Internet producing the connection between camera and your end device (computer, mobile,TabletPC) Only the connec-
ting data required for the camera are stored at Supra Space but not camera images.
Below the few steps for setting up your Maginon IPC-100AC for use via the Cloud are explained. Contrary to the installation explained in the Opera-
ting Instructions no additional conguration of the router is required. Nevertheless, this installation type is still subsequently available.
Implement Setup assistant
In the program Maginon IPCam Cong call up the Setup assistant from
“Settings”.
Select “Maginon IPC-100AC“ as camera model and click on “OK”. This
calls up the existing settings of the camera. In order to set up the camera
for use viaSupra Space select the third option“Camera with Supra Space
during the next step (recommended)“.
Enter any name for the camera in the next window, describing, for in-
stance, the location.
In the next step select Wireless network and set region to “Europe” and
enter the key.
Now enter the registration data for logging on to Supra Space. Select any
user name and a password consisting of at least 8 characters. Also enter a
valid email address. Note down this log-on information.
The last step repeats again the implemented settings.
Click on“Continue”to carry out the camera set-up.

Next open the start page of Supra Space in the Internet Browser using link http://Maginoncloud.com.
Enter user name specied in the Set-up assistant. The overview now lists all products of your IP camera. Select these to call up your camera. The
following page then appears.
Start Supra Space
Select symbol to call up the image of your Maginon IPC-100AC. Using the arrows below the image the camera head can be controlled and
the sound can be switched on or o.
Using call up the Web surface of your camera. Log on with user name“admin”and without a password. You then have access to all settings of
your Maginon IPC-100AC.
Use camera via Supra Space

The app“Maginon IPC Viewer“ is available for your camera from the
App Store and from Google Play. Load the App onto a Smartphone or a
TabletPC and start App.
Use symbol to log onto Supra Space. Use the log-on information
used in the Setup Assistant.
After logging on, the camera is immediately available from a list under
the chosen camera name. Select it from the display in order to view the
camera image.
You can control the camera head by wiping over the display in the
desired direction.
Use of the App
Select the surveillance camera from the list. The viewing window of the surveillance camera is displayed.
Touch the preview image or select“Display”in order to view the full
image.
When in preview mode, the alignment of the surveillance camera can
be directly controlled from the display.
Control surveillance camera using App