Magnavox MDV460 User manual

QUICK START GUIDE MDV460
A what’s in the box helpful hints
B connect TV
ADVD Player BRemote Control
includes 2x AAA batteries
CVideo cable
(yellow)
DAudio cable
(red/white)
You only need to make one video connection to your TV
in order to view DVD playback.
If your TV has
this video input jack(s)
1
2
Use this
video cable(s)
VIDEO
IN
Component Video
not supplied
supplied
If yourTV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD player
so it can play through theTV’s Antenna connector. Refer
to your owner’s manual for proper connection.
ANTENNA IN
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
Connect the mains
cord to the power
supply
3
Connect the DVD
Player VIDEO OUT to
VIDEO IN on the TV
1Connect the DVD Player
AUDIO OUT to AUDIO
IN on the TV
2
Note: For connecting to a Progressive Scan TV, refer to the user manual for proper
connections and detailed set up.
All manuals and user guides at all-guides.com
all-guides.com

1
3
2
LABEL
SUPER VIDEO
D DVD Setup Menu Options
C play a disc
GET PICTURE
•Check the connection of the DVD system
to TV is in place (see 2 Connect TV).
•Check the AV mode on TV. It may be
called FRONT,A/V IN, or VIDEO. Choose
the different modes usingTV remote
control.
•Or, use the TV remote control to select
Channel 1 on TV, then press Channel down
button until you get the picture.
•See your TV manual for more details.
Display Dim
OSD Language
Sleep
Screen Saver
- - General Setup Page - -
General Audio Video Preference General Audio Video Preference
Downmix
Digital Audio
- - Speaker Setup Page - -
General Audio Video Preference
Y ype
V Display
Progressive
Sharpness
Brightness
Contrast
Closed Caption
Black Level
- - Video Setup Page - -
General Audio Video Preference
Audio
Subtitle
Disc Menu
Parental
Password
Default
- - Preference Page - -
Refer to chapters “Getting Started”and “DVD Setup Menu Options”in
the user manual the detailed descriptions.
1
2
More settings and features
NEEDS HELP? Visit our website www.usasupport.magnavox.com
1Turn on the TV and set it to the correct Video In channel.
2Press STANDBY-ON on the DVD Player.
3Press OPEN/CLOSE /on the DVD Player and load a disc.
Press OPEN/CLOSE /again to close the disc tray.
4Playback will start automatically. If not press PLAY B.
5To stop playback, press STOP 9.
REGION CODES
1ALL
All manuals and user guides at all-guides.com