Magnavox W-08CR User manual

REMOTE CONTROL MANUAL
MODEL: W-08CR
W-10CR
W-12CR
MAGNAVOX and SMART. VERY SMART are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.

15ft
Using
Remote control specifications ....................................................... 3
Buttons functions ............................................................................ 4
mode
mode
mode
mode
Using
e, pointing itcnailppaehtmorfegnar
The remote control is powered by two AAA cover.batteries detacol in the back
AC
AC
going
prevent
from interfering with
back.in
Use the remote control within a 15 foot
towards the receiver. Reception is con-
firmed by a beep.
When the batteries are removed, the remote control resets all user configured
programming. After inserting new batteries, the remote control will have to be
reprogrammed.
Range of the remote control
Fan

3.0V(Two AAA batteries)
15ft HEAT(Cooling & heating
models only) and FAN.
Pushing this button will
automatically set the
COOL mode and fan
speed to the temperature
of around 26 C/80 F. Any
previously set TIMER pro-
o o
grams will be interrupted.
Press this button to
activate the Sleep
mode. This function is
only available on COOL,
HEAT or AUTO mode
to maintain a comfor-
table temperature.
one degree
up
"AUTO
START" "AUTO STOP"
one degree increments
down to around
o o
Battery Type
Operating Temperature
Remote Control Models
All the illustrations are for explanation purposes only.
Operation starts and
stops when the button
is pressed
The actual remote control design may differ.
Saver function, it will initiate
automatically the Energy
Saver function under COOL,
DRY, AUTO (only Auto-Cooling
and Auto-Fan) modes.
If the unit has Energy
改为：HEAT(Cooling & heating models only) and FAN.

In Auto mode, the fan speed is controlled automatically.
change the
mode so that it
In the Dehumidifying mode, you cannot switch the
fan speed. It is automatically controlled in this
mode.
running.
one degree
will automatically
select
depending on
desired set temperature
running.
one degree
running.
one degree
one degree, 30 minutes after the
one degree
is pressed
only
only
only on
mode
mode
mode
mode
on前面加：only

to
is
is
that
tahtsetacidnitirenoitidnocriaehtfodisplay
30 minute
appears
the
AUTO-START and AUTO-STOP setting program
shown display
AUTO-START/STOP
the range
START
AUTO-
AUTO-STOP
This feature is useful when you want to program
the AC to automatically STOP and then START.
This feature is useful when you want to program
the AC to automatically START and then STOP.
on the LCD display of the air conditioner.
UP
UP
AUTO START/STOP
DOWN
DOWN