Magnolia Home 5070111N User manual

ASSEMBLY INSTRUCTION
GROUP NO.: 50000007 - BOHO BEDROOM
ITEM NO.: 5070111N - 6/6 H/B,Wood Slat Bed - Barn door
5070104N - 5/0 -6/6 rail, Wood Slat Bed - Barn door
5070113N - 6/6 F/B, Wood Slat Bed w/slats - Barn door
Read instruction carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may come loose during
shipment. Remove all components from pack and place top down on soft surface such as carpet or cloth to
prevent scratching the finish. Identify and count all parts as specified below.
It is recommended to use two or more persons during the assembly process.
Made in Vietnam
HARDWARE LIST:
No. Description Qty
Sketch Size
8 x 25mm 8 pcs
BCurve Washer
PARTS LIST:
Qty
Description
No. Sketch
1HEADBOARD 1 pc
2FOOTBOARD 1 pc
Page: 1/2
Step 1
Step 1: UPSIDE DOWN FOOTBOARD (2) ON SOFT SURFACE SUCH AS CARPET OR CLOTH THEN.
ATTACH METAL LEG (6) TO FOOTBOARD (2) USING ALLEN BOLT (I),FLAT WASHER (K), SPRING WASHER (G) AND
ALLEN KEY (H).
3SIDERAIL 2 pc
4SLAT 4 pc
5LEG SUPPORT 8 pc
8 pcs
CSpring Washer
D4 x 38mm 8 pcs
Screw
8 pcs
Allen Bolt
E
4 mm 1 pc
Allen Key
H
ɸ
14'' x 40mm
8 pcs
Flat Washer
Fɸ
14'' x 13mm
12 pcs
GSpring Washer
Tool Required :Phillips Head Screw
Driver (Not Provided)
8 pcs
Thread bolt
Aɸ516'' x 80mm
ɸ516'' x 13mm
ɸ
14'' x 10mm
6METAL LEG 2 pc
4 pcs
Allen Bolt
Iɸ
14'' x 25mm
4 pcs
Flat Washer
Kɸ
14'' x 19mm
2
6
H
I
K
G
8 pcs
Hex Nut
L
M
12 mm
12 mm 1 pc
Open Wrench

ASSEMBLY INSTRUCTION
GROUP NO.: 50000007 - BOHO BEDROOM
ITEM NO.: 5070111N - 6/6 H/B,Wood Slat Bed - Barn door
5070104N - 5/0 -6/6 rail, Wood Slat Bed - Barn door
5070113N - 6/6 F/B, Wood Slat Bed w/slats - Barn door
Step 2
Step 3
Step 4: ATTACH SLAT (4) TO SIDE RAIL (3)
USING SCREW (D).
Made in Vietnam
Step 5
Step 5: BED ASSEMBLED
Page: 2/2
Step 3: ATTACH LEG SUPPORT (5) TO SLAT (4) USING
ALLEN BOLT (E), FLAT WASHER (F) AND SPRING
WASHER (G) AND ALLEN KEY (H).
4
5
1
32
4
5
E
F
G
H
D
1
2
3
Step 2: ATTACH SIDE RAIL (3) TO HEADBOARD (1) AND FOOTBOARD (2) ,USING THREAD BOLT (A), CURVE
WASHER (B), SPRING WASHER (C), HEX NUT (L) AND OPEN WRENCH (M).
Step 4
A
M
C
B
L