Magnum MCR-46 Operational manual

MCR-46
CREASING MACHINE
Productuser manual
M
MC CR R- -4 46 6 M Ma an nu ua al l C Cr re ea as si in ng g M Ma ac ch hi in ne e1 1
PDFcreated withpdfFactorytrialversion www.pdffactory.com

1.ComponentsNames
14
25
36
8
7
MachineStructure
1. Fixed position vernier 2. Vernierrail 3. Movingposition vernier
4. Vernierlock5. Position ruler 6. Operation platform
7. Creasinghandle 8. Mechanismcoreprotection cover
2.Technical Parameter
Function/Model MCR-46
WorkingWidth 460mm
WorkingThickness 0.36mm
Impress Width 1.3mm
Impress Thickness 0.4mm
MachineSize 600 490 130mm
MachineWeight 10.5kg
3.InstallationInstructions
Installation Location
Beforetheinstallation,pleaseputthemachineonanappropriateoperation
platform, leaveenoughoperationspaceand besuretosetthe machineupstable.
2
2 M MC CR R- -4 46 6 M Ma an nu ua al l C Cr re ea as si in ng g M Ma ac ch hi in ne e
PDFcreated withpdfFactorytrialversion www.pdffactory.com

4.OperationInstructions
Pleaseread themanualcarefullybeforeusingCreasing Machine
Oneoperatorisrequiredwhenthemachineisworking
Please do notpushthehandlestrongly,incase anydamage
occurredforthemachine, whichwill shortenitsusage
Operation Procedures
Macksurethepositionandsizeofthecreasingfirst,ifonlyonepieceof
creasingisneeded,fixtheposition ofright-sideSlidePositioningModel
accordingtothecreasingsize
If twopieceofcreasingisneeded,i.e.bookspinecreasingandreading
creasing:makesurethepositionofbookspinecreasingfirst,movethe
right-sideSlidePositioningModeltothatpositionandfix,thenmovethe
left-sideSlidePosition modeltocorrectpositionandfixaccordingtothe
readingcreasing sizeand position
WhenmovingtheSlidePositioningModel,pleaseholditsheadup
and movethemodelparallelly. Please don tmovewhenitsheadon
thevernire,incase anydamageoccurredtothemodelsuitor
vernire
WhenmovingtheSlidePositioningModeltotheneededposition,
pleasepushitsheadthere, and fixedthescrewsmanually, thenthe
modelisfixedthere, incase thecreasingpositionisnotexact
WhentheSlidePositioningModelisfixedintheneedposition,putdownthe
creasingpapersfromMechanismcoreprotectioncoverand relyitonthefixed
SlidePositioning Modelbackside
If onlyonepieceofcreasingisneeded,movethepaperrightward, andrelyit on
thefixedright-sideSlidePositioning Modelrightside.Pushtheoperation
handledownward, holditup, and takeoutofcreasingpaper. Creasingisready
If twopieceofcreasingisneeded,movethepaperrightwardfirst,andrelyiton
thefixedright-sideSlidePositioning Modelrightside.Pushtheoperation
handledownward,holditup,and thenmovethepaperleftward,relyiton the
left-sideSlidePositioning Modelleft side.Pushtheoperationhandledownward,
holditup,andtakeoutofcreasingpaper.Creasing isready
PDFcreated withpdfFactorytrialversion www.pdffactory.com