Majestic UFO X User manual

MARINE AND RV TV ANTENNA

Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you can enjoy the TV program after you finish running a channel scan.Option 1: Power from AC/DC power adapter.(Fig.4)1.Connect the cable from Antenna to power insert input.2.Connect the output connector of the power to DTV receivers or TVs.3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.insert /24V Option 2: Power from DC battery.1.Connect the cable from Antenna to power input.2.Connect the output connector of the power o DTV receivers or TVs.3.Connect the DC 12V input wires to the 12V DC jack on the power .4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.(Fig.5)insertinsert t/24V insert
Fig.2
Not includedin the package
Not includedin the package Use the mast bracket (n) to fix the antenna on the boatOption 2. mount ot included in the package(Fig.2)POWER SUPPLY CONNECTIONPowerinsertTVAC/DC adapter12V 150mAPowered from AC/DC power adaptor Fig. 4Not includedin the packageTVDC 12V+ -Powered fromDC batteryPowerinsertConnect the “F” male connector of the coaxial cable to the “F” female connector of the antenna, and wear the rubberboot to the end of the connected “F” connector. (Fig.3)
Fig.3
F-type connector linking boltCoaxial-cableWater-proof kitCOAX TV CABLE CONNECTIONO 360 OMNI DIRECTION TV SIGNAL receptionOperation Instruction:Note: For the best reception, please check the following conditions1. Keep the antenna away from the sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner, elevator, hair dryer and microwave oven...etc.2. Install the antenna as high as possible: in digital terrestrial reception, if there are some interceptions between antenna and transmission tower, it will cause the signal loss temporarily. So if the antenna is installed as high as possible, those interceptions will be reduced. Fig. 5